Doc. No:
ASUSTeK
COMPUTER INC.
Rev. Modification
V101
English CSC
Galaxy mini P320 Assembly &
Disassembly SOP
Modify description Issue div. Originator
Date: 2008.6.2
Revision:
Page: Grade:
Galaxy mini P320 Assembly & Disassembly
SOP
by
by
by
Form No : D2-001-11 Rev.01
Doc. No:
Galaxy mini P320 Assembly &
Disassembly SOP
Date:
Rev.: Page:
1
Disassembly / Assembly Procedure
Introduction
This section describes how to disassemble PDA P320. Many of the integrated devices used in
this phone are vulnerable to damage. Ensure adequate static protection is in place when
handling, shipping, and servicing any internal components.
Recommended Tools
Anti-Static Mat (Ground Cord included)
Anti-Static Wrist Strap
Torque Screw Driver (T5 type, torque is set to 1.2kg-cm)
Tweezers
Plastic blade
Doc. No:
Galaxy mini P320 Assembly &
Disassembly SOP
Date:
Rev.: Page:
2
Disassembly procedure
The following set of diagrams will demonstrate the correct sequence and action to disassemble P320.
Step 1
Take the stylus away from the PDA.
Step 2
Remove the battery cover and take the battery away.
Step 3
Pry the left side and the top side of the antenna cover and then take the antenna cover away.
Doc. No:
Galaxy mini P320 Assembly &
Disassembly SOP
Step 4
Unscrew and remove 5 screws on PDA by screw driver.
Date:
Rev.: Page:
3
Step 5
Pry the top side and the left side of the top case assy and then separate the top case from the PDA.
Doc. No:
Galaxy mini P320 Assembly &
Disassembly SOP
Step 6
Remove the Micro SD cover and the keypad.
Date:
Rev.: Page:
4
Step 7
Remove the receiver by a pair of tweezers.