USB Digital-to-Analog Converter
Standalone Digital-to-Analog Converter
High-end Headphones
and Headsets
- DVD Players
- AV Receivers
- Home Theatre Systems
- Speakers and amplifiers
iPhone / iPad / iPod
- Laptops
- Desktops
Edit
POWER INPUT
USB COA
TOS AUXAES
BIT PERFECT
Balanced Single End
HEADPHONE
8
765
AC IN
7 10
11
8
65
USB
VOLTAGE
COA
EBU
AES
R5R2 R4RR
R3
VR
Bypass
R1
LL
EX-IrDAAUX IN
1.0
2.0
USB
Audio
9
12
AC IN
USB
COA
EBU
AES
R5R2 R4RR
R3
VR
Bypass
R1
LL
EX-IrDAAUX IN
1.0
2.0
USB
Audio
14
13
15
11
VOLTAGE
U7908 / Second Edition / March 2013
Essence 3
Hi-Fi USB DAC(Digital-to-Analog Converter)
Quick Start Guide
Safety Information
1. Read and keep these instructions for future reference.
2. Follow all instructions and take note of all warnings.
3. Do not use this apparatus near water or expose the device to moisture.
4. Clean machine surface with a cloth. Avoid using detergent or cleaning uid.
5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
7. The polarized or grounding-type plug is for user safety. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the outlet.
8. Protect the power cord from being stepped on or compressed particularly at the point where it exits from
the apparatus.
9. Only use attachments/accessories approved by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus.
When using a cart, take care to avoid tipping over the load when moving the device.
11. Unplug this apparatus during lightning storms or when not in use for a long period of time.
12. Refer all repairs to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as when the power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Additional Safety Information
For your own safety please read the following important instructions
carefully before attempting to connect this unit to the main power supply.
The instructions provided will help you get the best performance from this
device and prolong the life of this product.
Repairs
Do not attempt to repair or disassemble this product. Consult a qualied
technician or professional for service or repairs.
Fuse
The fuse holder is located next to the power connector at the rear panel of the device.
Package Contents
This package should contain the following:
• ASUS Essence 3 Hi-Fi USB DAC x 1
• USB cable (‘B-A’ type) x 1
• Power cord x 1 (may contain two power cords depending on region/country)
• 6.3mm to 3.5mm adapter x 1
• Multi-language QSG x 1
• Audio-Precision (AP) test report x 1
• Installation driver CD x 1
• Spare fuse
• Remote control x 1
• IR Receiver Cable x 1
• XLR to mini XLR x 2
• XLR to RCA x 1
• RCA to RCA x 1
Use tools to replace the fuse.
System Requirements
To ensure a successful installation of the ASUS Essence 3 USB DAC, your computer must
meet the following requirements:
• IBM compatible PC with one USB2.0 (or higher) compatible port for the USB audio device
• Mac OSX 10.6 / Microsoft® Windows® 8 (32/64bit) / 7 (32/64bit) / XP (32/64bit)
• Intel® Pentium® 4 1.4GHz or AMD Athlon 1400 CPU or faster CPU
• 256 MB DRAM system memory
• 200 MB available HDD space for driver installation
• CD-ROM drive (or DVD-ROM drive) for software installation
• High-quality headphones or powered analog speakers
Driver Installation
After connecting the ASUS Essence 3 to your computer using the bundled USB cable,
install the device driver using the provided CD.
NOTES:
• Driver installation is only required if you plan to connect the ASUS Essence 3 to a
PC or notebook.
• Driver version and the contents of the support CD are subject to change without
notice.
T
o install the device driver:
1. Insert the ASUS Essence 3 Support CD into your optical drive. Proceed to Step 5, if
Autorun is enabled on your computer and the driver setup screen appears. If Autorun is
not enabled on your computer, perform step 2.
2. On your Windows desktop, launch File Explorer.
• Windows® 7 SP1 Click Start then Computer.
• Windows® 8 Click + E
3. In File Explorer, double-click the optical drive icon.
4. Double-click Setup.exe.
5. Read through the End User License Agreement and click Accept when prompted.
Follow the on-screen instructions to complete driver installation.
6. When driver installation is complete, you will be prompted to restart your computer.
Functionality
Hardware Features
Front panel
1 - Power On/O
Press to power o/on the Essence 3.
2 - Input selection
Press to select audio input source: USB, TOSLINK, Coaxial (COA), AES/EBU (AES3), or
AUX audio input.
3 - Input selection/Bit perfect indicator
The corresponding LED will light up to show which audio source has been selected.
4 - Speaker volume control
The volume control adjusts the output level of unbalanced RCA and balanced XLR
analog output.
5 - Headphone volume control
The volume control adjusts the output levels of the headphone jack.
6 - Headphone output (Balanced)
Connect your high-quality headphones/headsets with mini-XLR left and right
connectors.
7 - Headphone output (Single connector)
Connect your high-quality headphones/headsets with a 6.3mm connector.
8 - IR sensor
Point your remote control in this area to remotely adjust input and volume.
Deutsch Italiano
1 -Ein-/Austaste
2 - Eingangswahl
3 -Eingangswahl-/Bit Perfect-Anzeige
4 - Lautsprecher-Lautstärkeregler
5 - Kopfhörer-Lautstärkeregler
6 - Kopfhörerausgang (symmetrisch)
7 -Kopfhörerausgang (einzelner Anschluss)
8 -Infrarotsensor
Français
1 - Bouton Marche/Arrêt
2 - Sélection d’entrée
3 - Indicateur lumineux de sélection d’entrée
4 - Contrôle du volume (haut-parleurs)
5 - Contrôle du volume (casque)
6 - Sortie casque (asymétrique)
7 - Sortie casque (asymétrique)
8 - Capteur infrarouge
Русский
1 - Включение/отключение питания
2 - Выбор входа
3 - Индикатор выбранного входа
4 - Регулятор громкости
5 - регулятор громкости наушников
6 - Выход для наушников (сбалансированный)
7 - Выход для наушников (один разъем)
8 - ИК-датчик
БЪЛГАРСКИ
1 - Вкл./Изкл.
2 - Избор на вход
3 - Избор на вход/Bit perfect индикатор
4 - Управление на силата на звука на
високоговорителя
5 - Управление на силата на звука на
слушалките
6 - Изход за слушалки (балансиран)
7 - Изход за слушалки (един конектор)
8 - IR сензор
HRVATSKI
1 - Uključivanje / isključivanje
2 - Odabir ulaza
3 - Odabir ulaza / Bit perfect indikator
4 - Regulator glasnoće zvučnika
5 - Regulator glasnoće slušalica
6 - Izlaz za slušalice (uravnoteženo)
7 - Izlaz za slušalice (jedan priključak)
8 - IC senzor
ČEŠTINA
1 - Vypínač
2 - Výběr vstupu
3 - Indikátor výběru vstupu/Bit Perfect
4 - Ovladač hlasitosti reproduktorů
5 - Ovladač hlasitosti sluchátek
6 - Výstup pro sluchátka (vyvážený)
7 - Výstup sluchátek (jeden konektor)
8 - Infračervený snímač
DANSK
1 - Tænd/sluk
2 - Indgangsvalg
3 - Indgangsvalg/Bit-perfect-indikator
4 - Lydstyrkeknap til højttaler
5 - Lydstyrkeknap til hovedtelefoner
6 - Hovedtelefonstik (balanceret)
7 - Hovedtelefonstik (enkelt stik)
8 - IR-sensor
SUOMI
1 - Virta Päälle/Pois
2 - Tulon valinta
3 - Tulon valinta / Bit perfect -merkkivalo
4 - Kaiuttimen äänenvoimakkuuden säätö
5 - Kuulokkeiden äänenvoimakkuuden säätö
6 - Kuulokelähtö (tasapainotettu)
7 - Kuulokelähtö (Yksi liitin)
8 - Infrapuna-anturi
ΕΛΛΗΝΙΚΆ
1 - Λειτουργία On/O (Ενεργ./Απενεργ.)
2 - Επιλογή εισόδου
3 - Επιλογή εισόδου/Ένδειξη Bit perfect
4 - Ρύθμιση έντασης ηχείου
5 - Ρύθμιση έντασης ακουστικών
6 - Έξοδος ακουστικών (Ισορροπία)
7 - Έξοδος ακουστικών (Απλή σύνδεση)
8 - Αισθητήρας υπέρυθρων (IR)
MAGYAR
1 - Főkapcsoló
2 - Bemenetválasztás
3 - Bemenetválasztás/Érintetlen bitátvitel kijelző
4 - Hangszóró hangerő-szabályozó
5 - Fejhallgató hangerő-szabályozó
6 - Fejhallgató kimenet (Szimmetrikus)
7 - Fejhallgató kimenet (Aszimmetrikus)
8 - Infravörös érzékelő
NORSK
1 - Strøm på/av
2 -Inngangsvalg
3 -Inngangsvalg / bitperfekt-indikator
4 -Volumkontroll for høyttaler
5 -Volumkontroll for hodetelefon
6 -Hodetelefonutgang (balansert)
7 -Hodetelefonutgang (enkeltkontakt)
8 -IR-sensor
1 - Accensione/spegnimento
2 -Selezione ingresso
3 -Indicatore selezione ingresso/Bit Perfect
4 - Controllo volume altoparlante
5 - Controllo volume cue
6 -Uscita cue (bilanciata)
7 -Uscita cue (connettore singolo)
8 - Sensore IR
Português
1 - Ligar/Desligar a alimentação
2 - Selecção da entrada
3 - Indicador de selecção da entrada/Bit perfect
4 - Controlo do volume do altifalante
5 - Controlo do volume dos auscultadores
6 - Saída para auscultadores (Equilibrada)
7 - Saída para auscultadores (Conector único)
8 -Sensor de IV
ROMÂNĂ
1 - Pornire/Oprire alimentare
2 - Selectare intrare
3 - Indicator selectare intrare/indicator Bit Perfect
4 - Control al volumului pentru difuzoare
5 - Control al volumului pentru căşti
6 - Ieşire căşti (echilibrat)
7 - Ieşire căşti (conector unic)
8 - Senzor IR
SRPSKI
1 - Uključeno/isključeno napajanje
2 - Odabir unosa
3 - Odabir unosa/Indikator savršenog ritma
4 - Kontrola jačine tona zvučnika
5 - Kontrola jačine tona slušalica
6 - Izlaz za slušalice (Balansiran)
7 - Izlaz za slušalice (Jedan konektor)
8 - Infracrveni senzor
SLOVENŠČINA
1 - Vklop/izklop
2 - Izbira vhoda
3 - Izbira vhoda/indikator Bit perfect
4 - Nadzor glasnosti zvočnika
5 - Nadzor glasnosti slušalk
6 - Izhod slušalk (uravnoteženo)
7 - Izhod slušalk (enojni priključek)
8 - IR-senzor
Español
1 - Encendido y apagado
2 - Selección de entrada
3 - Selección de entrada/Indicador perfecto de bits
4 - Control de volumen del altavoz
5 - Control de volumen de los auriculares
6 - Salida de auriculares (balanceada)
7 - Salida de auriculares (conector único)
8 - Sensor de infrarrojos (IR)
SVENSKA
1 - Ström På/Av
2 - Inmatningsval
3 - Inmatningsval/bit perfekt indikator
4 - Kontroll högtalarvolym
5 - Kontroll hörlursvolym
6 - Hörlursuttag (balanserat)
7 - Hörlursuttag (enkelkontakt)
8 - IR-mottagare
Türkçe
1 - Güç Açık/Kapalı
2 - Giriş seçimi
3 - Giriş seçimi/Bit mükemmel göstergesi
4 - Hoparlör ses kontrolü
5 - Kulaklık sesi kontrolü
6 - Kulaklık çıkışı (Dengeli)
7 - Kulaklık çıkışı (Tekli konektör)
8 - IR sensörü
Українська
1 - Увімкнути/вимкнути живлення
2 - Вибір входу
3 - Вибір входу/ Індикатор Bit-perfect
4 - Контроль гучності динаміків
5 - Контроль гучності навушників
6 - Вихід навушників (збалансований)
7 - Вихід навушників (єдиний сполучувач)
8 - Інфрачервоний сенсор
NEDERLANDS
1 - In/uitschakelen
2 - Ingangsselectie
3 - Ingangsselectie/bit perfect-indicator
4 - Volumeregeling luidspreker
5 - Volumeregeling hoofdtelefoon
6 - Hoofdtelefoonuitgang (gebalanceerd)
7 - Hoofdtelefoonuitgang (enkele aansluiting)
8 - IR-sensor
POLSKI
1 - Włączenie/wyłączenie zasilania
2 - Wybór wejścia
3 - Wybór wejścia/Wskaźnik zgodności bitowej
4 - Regulacja głośności głośnika
5 - Regulacja głośności słuchawek
6 - Wyjście słuchawek (Zrównoważone)
7 - Wyjście słuchawek (Pojedyncze złącze)
8 - Sensor podczerwieni
Hardware Features
Rear panel
English
1- Balanced XLR Output (Line-Out)
The ASUS Essence 3 features true balanced
(XLR) output and suppor ts balanced XLR
audio speaker sets and audio receivers.
2 - Unbalanced RCA Output (Line-Out)
This port supports conventional stereo output
for conne ctio n to line -level phono/RCA
speaker systems or audio receivers.
3 - AUX Input
This port supports Apple iPod, iPad, and
iPhone devices as well as other audio sources
using a 3.5mm stereo connector.
4 - Ex-IrDA
Connect an IR receiver to this port if the
Essence 3 does not have direct line of sight to
the remote control.
5 - USB Audio 1.0/2.0
Use this switch to toggle between USB 1.0
and USB 2.0 audio support. Select USB audio
1.0 for Plug-and-Play devices. Select USB 2.0
on Apple Mac computers.
6 - EBU/AES Input
This port is used for connecting external
digital decoders or digital speaker systems,
home theater systems, AV receivers, and TV
sets.
7 - TOSLINK Optical Input
This port is used to support TOSLINK input
audio sources.
8 - Coaxial (COA) S/PDIF Input
This port is for connecting external digital
decoders or digital speaker systems, home
theater sets, and AV receivers for outputting
digital audio. This connection produces loop
or pass-through unprocessed digital audio.
9 - USB port
This USB por t can be used to connec t a
desktop PC or laptop using a Type B to Type A
USB cable.
10 - Power connector
Plug the supplied power adaptor into the
Essence 3 after connecting all audio devices.
11 - VR Bypass (Volume Control Selection
Bypass)
Use this switch to bypass volume control on
Line-Out.
12 - XLR VR Calibration (R1, R2, R5)
Turn to calibrate XLR volume control.
13 - AUX IN VR Calibration (R3)
Turn to calibrate AUX IN volume control.
14 - RCA VR Calibration (R4)
Turn to calibrate RCA volume control.
15 - Voltage Selector
Use this switch to change voltage from 230V
to 115V.
Русский
1 - Симметричный выход XLR (Line-Out)
2 - Несимметричный выход RCA (Line-Out)
3 - Аудио-вход
4 - Дополнительный ИК-порт
5 - USB Audio 1.0/2.0
6 - Вход EBU/AES
7 - Оптический вход TOSLINK
8 - Коаксиальный вход (COA) S/PDIF
9 - USB-порт
10 - Разъем питания
11 - VR Bypass (отключение регулятора
громкости)
12 - Калибровка XLR VR (R1, R2, R5)
13 - Калибровка AUX IN VR (R3)
14 - Калибровка RCA VR (R4)
15 - Переключатель напряжения
Français
1 - Sortie XLR symétrique
2 - Sortie RCA dissymétrique
3 - Entrée auxiliaire (AUX)
4 - Ex-irDA
5 - USB Audio 1.0/2.0
6 - Entrée EBU/AES
7 - Entrée optique TOSLINK
8 - Entrée S/PDIF coaxiale
9 - Port USB
10- Connecteur d’alimentation
11 - Contournement du contrôle de volume
12 - Calibration VR XLR (R1, R2, R5)
13 - Calibration d’entrée AUX (R3)
14 - Calibration VR RCA (R4)
15 - Interrupteur de selection du voltage
Deutsch
1- Symmetrischer XLR-Ausgang (Line-Ausgang)
2 - Asymmetrischer Cinchausgang (Line-Ausgang)
3 - AUX-Eingang
4 - Ex-IrDA
5 - USB-Audio 1.0/2.0
6 - EBU/AES-Eingang
7 - Optischer TOSLINK-Eingang
8 - Koaxialer S/PDIF-Eingang (COA)
9 - USB-Port
10 -Netzanschluss
11 - VR-Bypass (Lautstärke-Bypass)
12 - XLR-VR-Kalibrierung (R1, R2, R5)
13 - AUX-IN-VR-Kalibrierung (R3)
14 -Cinch-VR-Kalibrierung (R4)
15 - Spannungswähler
Italiano
1- Uscita XLR bilanciata (uscita linea)
2 - Uscita RCA non bilanciata (uscita linea)
3 - Ingresso AUX
4 - Ex-IrDA
5 - Audio USB 1.0/2.0
6 - Ingresso EBU/AES
7 - Ingresso ottico TOSLINK
8 - Ingresso coassiale (COA) S/PDIF
9 - Porta USB
10 - Connettore di alimentazione
11 - Bypass VR (bypass selezione controllo volume)
12 - Calibrazione VR XLR (R1, R2, R5)
13 - Calibrazione VR AUX IN (R3)
14 - Calibrazione VR RCA (R4)
15 - Selettore di tensione
БЪЛГАРСКИ
1- Балансиран XLR изход (Line-Out)
2 - Небалансиран RCA изход (Line-Out)
3 - AUX изход
4 - Ex-IrDA
5 - USB аудио 1,0/2,0
6 - EBU/AES вход
7 - TOSLINK оптичен вход
8 - Коаксиален (COA) S/PDIF вход
9 - USB порт
10 - Конектор за захранването
11 - VR Bypass (Заобикаляне на избор за
управление на силата на звука)
12 - XLR VR калибриране (R1, R2, R5)
13 - AUX IN VR калибриране (R3)
14 - RCA VR калибриране (R4)
15 - Ключ за избор на напрежението
AC IN
USB
COA
EBU
AES
R5R2 R4RR
R3
VR
Bypass
R1
LL
EX-IrDAAUX IN
1.0
2.0
USB
Audio
iPhone / iPad / iPod
VOLTAGE
AC IN
USB
COA
EBU
AES
R5R2 R4RR
R3
VR
Bypass
R1
LL
EX-IrDAAUX IN
1.0
2.0
USB
Audio
Option #2: XLR connection
Option #1: RCA connection
Amplifier
Passive Speaker System
LR
L
R
Unbalanced
Input
Balanced
Input
VOLTAGE
AC IN
USB
COA
EBU
AES
R5R2 R4RR
R3
VR
Bypass
R1
LL
EX-IrDAAUX IN
1.0
2.0
USB
Audio
Active Speaker System
VOLTAGE
POWER INPUT
USB COA
TOS AUXAES
BIT PERFECT
Balanced Single End
HEADPHONE
Option #1 Left and right
mini-XLR connector
Option #2 6.3mm
connector
High-end
headphones/headsets
AC IN
USB
COA
EBU
AES
R5R2 R4RR
R3
VR
Bypass
R1
LL
EX-IrDAAUX IN
1.0
2.0
USB
Audio
IR Receiver
VOLTAGE
AC IN
USB
COA
EBU
AES
R5R2 R4RR
R3
VR
Bypass
R1
LL
EX-IrDAAUX IN
1.0
2.0
USB
Audio
TOSLINK audio cable
AV Receiver/Amplifier
Coaxial audio
connector (COA)
AES/EBU
connector
CD/DVD Player
Audio Receiver
Digital Outputs
Edit
VOLTAGE
Q7908 / First Edition / March 2013
VOLTAGE
AC IN
USB
COA
EBU
AES
R5R2 R4RR
R3
VR
Bypass
R1
LL
EX-IrDAAUX IN
1.0
2.0
USB
Audio
Mini-USB B-A type
connector
Desktop PC
Laptop/Portable
HRVATSKI ČEŠTINA
1- Uravnoteženi XLR izlaz (linijski izlaz)
2- Neuravnoteženi RCA izlaz (linijski izlaz)
3- AUX ulaz
4- Ex-IrDA
5- USB Audio 1.0/2.0
6- EBU/AES ulaz
7- TOSLINK optički ulaz
8- Koaksijalni (COA) S/PDIF ulaz
9- USB priključak
10- Priključak za napajanje
11- VR Zaobilazak (zaobilazak odabira regulatora
glasnoće)
12- XLR VR kalibracija (R1, R2, R5)
13- AUX ulaz VR Kalibracija (R3)
14- RCA VR kalibracija (R4)
15- Izbor napajanja
DANSK
1- Balanceret XLR-udgang (linje-ud)
2- Ikke-balanceret RCA-udgang (linje-ud)
3- AUX-indgang
4- Ex-IrDA
5- USB-lyd 1.0/2.0
6- EBU/AES-indgang
7- TOSLINK optisk indgang
8- Koaksial (COA) S/PDIF-indgang
9- USB-port
10- Strømstik
11- VR Bypass (lydstyrke bypass)
12- XLR VR kalibrering (R1, R2, R5)
13- AUX IND VR kalibrering (R3)
14- RCA VR kalibrering (R4)
15- Spændingsknap
NEDERLANDS
1- Gebalanceerde XLR-uitgang (lijnuitgang)
2- Niet-gebalanceerde RCA-uitgang (lijnuitgang)
3- AUX-ingang
4- Ex-IrDA
5- USB audio 1.0/2.0
6- EBU/AES-ingang
7- Optische TOSLINK-ingang
8- Coaxiale (COA) S/PDIF-ingang
9- USB-poort
10- Voedingsaansluiting
11- VR-bypass (bypass selectie volumeregeling)
12- XLR VR-kalibratie (R1, R2, R5)
13- AUX IN VR-kalibratie (R3)
14- RCA VR-kalibratie (R4)
15- Spanningsselectie
SUOMI
1- Tasapainotettu XLR-lähtö (Linja ulos)
2- Tasapainottamaton RCA-lähtö (Linja ulos)
3- AUX-tuloliitäntä
4- Ex-IrDA
5- USB-audio 1.0/2.0
6- EBU/AES-tulo
7- TOSLINK-optinen tulo
8- Koaksiaali (COA) S/PDIF -tulo
9- USB-portti
10- Virtaliitäntä
11- VR -ohitus (Äänenvoimakkuuden säätövalinnan
ohitus)
12- XLR VR -kalibrointi (R1, R2, R5)
13- AUX IN VR -kalibrointi (R3)
14- RCA VR -kalibrointi (R4)
15- Jännitteen valitsin
ROMÂNĂ
1- Ieşire XLR echilibrată (ieşire linie)
2- Ieşire RCA dezechilibrată (ieşire linie)
3- Intrare auxiliară
4- Ex-IrDA
5- USB Audio 1.0/2.0
6- Intrare EBU/AES
7- Intrare optică TOSLINK
8- Intrare coaxială (COA) S/PDIF
9- Port USB
10- Conector alimentare
11- Omitere VR (omitere a selectării controlului de
volum)
12- Calibrare VR XLR (R1, R2, R5)
13- Calibrare VT intrare auxiliară (R3)
14- Calibrare VR RCA (R4)
15- Selector tensiune
ΕΛΛΗΝΙΚΆ
1- Εξισορροπημένη έξοδος XLR (Γραμμή εξόδου)
2- Μη εξ ι σορροπημένη έξοδος RCA (Γραμ μ ή
εξόδου)
3- Είσοδος AUX
4- Ex-IrDA
5- Ήχος USB 1.0/2.0
6- Είσοδος EBU/AES
7- Οπτική είσοδος TOSLINK
8- Ομοαξονική (COA) είσοδος S/PDIF
9- Θύρα USB
10- Ακροδέκτης σύνδεσης στην τροφοδοσία
11- VR Bypass (Παράκαμψη επιλογής ελέγχου
έντασης ήχου)
12- Βαθμονόμηση VR XLR (R1, R2, R5)
13- Βαθμονόμηση AUX IN VR (R3)
14- Βαθμονόμηση VR RCA (R4)
15- Επιλογέας τάσης
1- Vyvážený výstup XLR (linkový výstup)
2- Nevyvážený výstup RCA (linkový výstup)
3- Vstup AUX
4- Ex-IrDA
5- Zvuk USB 1.0/2.0
6- Vstup EBU/AES
7- Optický vstup TOSLINK
8- Koaxiální vstup (COA) S/PDIF
9- Port USB
10- Konektor napájení
11- Obtok VR (obtok výběru ovládání hlasitosti)
12- Kalibrace XLR VR (R1, R2, R5)
13- Kalibrace AUX IN VR (R3)
14- Kalibrace RCA VR (R4)
15- Volič napětí
MAGYAR
1- Szimmetrikus XLR kimenet (Vonalszintű
kimenet)
2- Aszimmetrikus RCA kimenet (Vonalszintű
kimenet)
3- AUX bemenet
4- Ex-IrDA
5- USB Audio 1.0/2.0
6- EBU/AES bemenet
7- TOSLINK optikai bemenet
8- Koaxiális (COA) S/PDIF bemenet
9- USB-port
10- Tápcsatlakozó
11- VR kikapcsolás (Hangerő-szabályozó választó
kikapcsolása)
12- XLR VR kalibráció (R1, R2, R5)
13- AUX IN VR kalibráció (R3)
14- RCA VR kalibráció (R4)
15- Feszültségválasztó
SRPSKI
1- Balansiran XLR izlaz (Izlazna linija)
2- Nebalansiran RCA izlaz (Izlazna linija)
3- AUX ulaz
4- Ex-IrDA
5- USB Audio 1.0/2.0
6- EBU/AES ulaz
7- TOSLINK optički ulaz
8- Koaksijalni (COA) S/PDIF ulaz
9- USB port
10- Konektor za napajanje
11- V R mimoilažen j e (Mimoil a že nje odabira
kontrole jačine tona)
12- XLR VR kalibracija (R1, R2, R5)
13- AUX IN VR kalibracija (R3)
14- RCA VR kalibracija (R4)
15- Odabir napona
SLOVENŠČINA
1- Uravnotežen izhod XLR (»line-out«)
2- Uravnotežen izhod RCA (»line-out«)
3- Vhod AUX
4- Ex-IrDA
5- Zvok USB 1.0/2.0
6- Vhod EBU/AES
7- Optični vhod TOSLINK
8- Koaksialni (COA) vhod S/PDIF
9- Vrata USB
10- Priključek za napajanje
11- Obhod VR (obhod izbora nadzora glasnosti)
12- Umerjanje XLR VR (R1, R2, R5)
13- Umerjanje AUX IN VR (R3)
14- Umerjanje RCA VR (R4)
15- Izbirnik napetosti
Español
1- Salida XLR balanceada (salida de línea)
2 - Salida RCA no balanceada (salida de línea)
3 - Entrada AUXILIAR
4 - Ex-IrDA
5 - Audio USB 1.0/2.0
6 - Entrada EBU/AES
7 - Entrada óptica TOSLINK
8 - Entrada coaxial (COA) S/PDIF
9 - Puerto USB
10 - Conector de alimentación
11 - Derivación VR (derivación de selección de
control de volumen)
12 - Calibración VR XLR (R1, R2 y R5)
13 - Calibración VR de ENTRADA DE LÍNEA (R3)
14 - Calibración VR RCA (R4)
15 - Selector de voltaje
NORSK
1- Balansert XLR-utgang (linje ut)
2- Ubalansert RCA-utgang (linje ut)
3- AUX-inngang
4- Ex-IrDA-port
5- USB 1.0/2.0-lyd
6- EBU/AES-inngang
7- TOSLINK optisk inngang
8- Koaksial (COA) S/PDIF-inngang
9- USB-port
10- Strømkontakt
11- VR-bypass (direktekobling av volumkontroll)
12- XLR VR-kalibrering (R1, R2, R5)
13- AUX INN VR-kalibrering (R3)
14- RCA VR-kalibrering (R4)
15- Spenningsvelger
POLSKI
1- Zrównoważone wyjście XLR (Wyjście liniowe)
2- Zrównoważone wyjście RCA (Wyjście liniowe)
3- Wejście AUX
4- Ex-IrDA
5- USB Audio 1.0/2.0
6- Wejście EBU/AES
7- Wejście optyczne TOSLINK
8- Wejście koncentryczne (COA) S/PDIF
9- Port USB
10- Złącze zasilania
11- Ominięcie VR (Ominięcie wyboru regulacji
głośności)
12- Kalibracja VR XLR (R1, R2, R5)
13- Kalibracja VR WEJŚCIA AUX (R3)
14- Kalibracja VR RCA (R4)
15- Selektor napięcia
Português
1- Saída XLR equilibrada (Saída de linha)
2 - Saída RCA desequilibrada (Saída de linha).
3 - Entrada AUX
4 - Ex-IrDA
5 - Áudio USB 1.0/2.0
6 - Entrada EBU/AES
7 - Entrada óptica TOSLINK
8 - Entrada S/PDIF coaxial (COA)
9 - Porta USB
10 - Conector de alimentação
11 - Derivação de VR (Derivação de selecção de
controlo do volume)
12 - Calibração VR XLR (R1, R2, R5)
13 - Calibração VR de Entrada AUX (R3)
14 - Calibração VR RCA (R4)
15 - Seletor de tensão
SVENSKA
1- Balanserad XLR utmatning (Line-Out)
2- Obalanserad RCA utmatning (Line-Out)
3- AUX-ingång
4- Ex-IrDA
5- USB Audio 1.0/2.0
6- EBU/AES inmatning
7- TOSLINK optisk inmatning
8- Koaxial (COA) S/PDIF inmatning
9- USB-port
10- Strömkontakt
11- VR förbikoppling (volymkontrollsval
förbikoppling)
12- XLR VR kalibrering (R1, R2, R5)
13- AUX IN VR kalibrering (R3)
14- RCA VR kalibrering (R4)
15- Spänningsväljare.
Türkçe
1- Dengeli XLR Çıkışı (Hat Çıkışı)
2 - Dengesiz RCA Çıkışı (Hat Çıkışı)
3 - AUX Girişi
4 - Ex-IrDA
5 - USB Audio 1.0/2.0
6 -EBU/AES Girişi
7 - TOSLINK Optik Giriş
8 - Koaksiyal (COA) S/PDIF Girişi
9 - USB bağlantı noktası
10 - Güç konektörü
11 - VR Baypas (Ses Kontrolü Seçim Baypası)
12 - XLR VR Kalibrasyonu (R1, R2, R5)
13 - AUX IN VR Kalibrasyonu (R3)
14 - RCA VR Kalibrasyonu (R4)
15 - Voltaj Selektörü
Українська
1- Збалансований вихід XLR (Вихід лінії)
2 - Незбалансований вихід RCA (Вихід лінії)
3 - Вхід AUX
4 - Ex-IrDA
5 - Аудіо USB 1.0/2.0
6 - Вхід EBU/AES
7 - Оптичний вхід TOSLINK
8 - Коаксіальний вхід (COA) S/PDIF
9 - Порт USB
10 - Сполучувач живлення
11 - Фільтр VR (Фільтр вибору контролю
гучності)
12 - Калібрування XLR VR (R1, R2, R5)
13 - Калібрування AUX IN VR (R3)
14 - Калібрування RCA VR (R4)
15 - Селектор напруги
Remote Control
English
1- Power On/O
Press this button to switch o/on the Essence 3.
2- Speaker Volume
Press the button to adjust speaker volume.
3 - Output Select
Press this button to switch audio output source.
4 - Input Select
Press this button to switch audio input source.
Deutsch
1 - Bouton Marche/Arrêt
2 - Contrôle du volume
(haut-parleurs)
3 - Sélection de sortie
4 - Sélection d’entrée
Русский
1- Включение/отключение
питания
Громкость динамиков
2-
Выбор выхода
3 -
Выбор источника сигнала
4 -
HRVATSKI
1- Uključivanje/isključivanje
2- Glasnoća zvučnika
3- Izbor izlaza
4- Izbor ulaza
NEDERLANDS
1- In/uitschakelen.
2- Luidsprekervolume
3- Uitgangsselectie
4- Ingangsselectie
ROMÂNĂ
1- Pornire/Oprire
alimentare
2- Volum difuzor
3- Selectare ieşire
4- Selectare intrare
MAGYAR
1- Üzemkapcsoló.
2- Hangszóró hangerő
3- Kimenetválasztás
4- Bemenetválasztás
SLOVENŠČINA
1- Vklop/izklop
2- Glasnost zvočnika
3- Izbira izhoda
4- Izbira vhoda
NORSK
1- Strøm på/av.
2- Høyttalervolum
3- Utgangsvalg
4- Inngangsvalg
Português
1- Ligar/Desligar a
alimentação
2- Volume do altifalante
3 - Selecção da saída
4 - Selecção da entrada
SVENSKA
1- Ström På/Av.
2- Högtalarvolym
3- Utmatningsval
4- Inmatningsval
Українська
1- Увімкнути/вимкнути
живлення
2- Гучність динаміка
3 - Вибір виходу
4 - Вибір входу
Français
1- Ein-/Austaste
2- Lautsprecher-
Lautstärkeregler
3 - Ausgangswahl
4 - Eingangswahl
Italiano
1- Accensione/
spegnimento
2- Volume altoparlante
3 - Selezione uscita
4 - Selezione ingresso
БЪЛГАРСКИ
1- Вкл./Изкл.
2- Сила на звука от
високоговорителя
3 - Избор на изход
4 - Избор на вход
ČEŠTINA
1- Zapnutí/vypnutí.
2- Hlasitost
reproduktorů
3- Výběr výstupu
4- Výběr vstupu
DANSK
1- Tænd/sluk
2- Højttalerlydstyrke
3- Valg af udgang
4- Valg af indgang
SUOMI
1- Virta Päälle/Pois.
2- Kaiuttimen
äänenvoimakkuus
3- Lähtövalinta
4- Tulovalinta
ΕΛΛΗΝΙΚΆ
1- Λειτουργία On/O ff
(Ενεργ./Απενεργ.)
2- Ένταση ηχείου
3- Επιλογή εξόδου
4- Επιλογή εισόδου
SRPSKI
1- Uključeno/isključeno
napajanje
5- Jačina tona zvučnika
3- Odabir izlaza
4- Odabir unosa
Español
1- Encendido y apagado
2- Volumen del altavoz
3 - Selección de salida
4 - Selección de entrada
POLSKI
1- Włączenie/wyłączenie
zasilania.
2- Głośność głośnika
3- Wybór wyjścia
4- Wybór wejścia
Türkçe
1- Güç Açık/Kapalı
2- Hoparlör Ses Ayarı
3 - Çıkışı Seç
4 -Giriş Seç
Connectivity Options
Connecting a desktop PC or laptop using USB
1. Connect a USB B-A type cable to the Essence 3's rear USB connector to one of the USB
ports on the desktop PC or laptop.
2. Power on the Essence 3 and select USB input using the front panel or remote control.
Ensure that the USB LED is on.
3. Install device drivers from the support CD. Please refer to the section Driver
Installation.
Connecting an amplier and passive speaker setup
1. Connect the amplier to the Essence 3 using either the unbalanced (RCA/Phono)
or balanced (XLR) output connectors.
2. Connect the amplifer to a passive speaker system.
Connecting digital audio input devices using AES/EBU/TOSLINK/COA
Connecting an iPhone / iPad / iPhone (Smart Devices) using AUX IN
Connecting an EX-IrDA receiver
Connecting high-end headphones/headsets
Connecting an active speaker set directly