Asus V9900, EN7300, V9400, EN5900, EN6800 User Manual

...

Graphics Card

Drivers and Utilities

Installation Guide

E1836E1836

E1836

E1836E1836

First First

First

First First

20052005

2005

20052005

Copyright© 2005 ASUSTeK COMPUTER INC. All Rights Reserved.Copyright© 2005 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual are used only for identification or explanation and to the owner’s benefit, without intent to infringe.

EditionEdition

Edition

EditionEdition

ASUS and the ASUS logo are registered trademarks of ASUSTeK COMPUTER INC.

Microsoft, Windows, Windows 98, windows 98SE, Windows ME, Windows 2000, Windows NT and Windows XP are registered trademarks of Microsoft Corporation. Intel is a registered trademark of Intel Corporation. NVIDIA is a registered trademark of NVIDIA Corporation. SiS is a registered trademark of Silicon Integrated Systems Corporation. NVIDIA is a registered trademark of NVIDIA Corporation. ALi is a registered trademark of ALi Corporation. VIA is a trademark of VIA Technologies, Inc. All other company and product names may be trademarks or registered trademarks of the respective owners with which they are associated.

iiii

Contents

Notices ................................................................................................ iv

Safety information ............................................................................... v

About this guide ................................................................................. vi

Conventions used in this guide ............................................... vi

Where to find more information .............................................. vi

1. Support CD information ........................................................... 1

2. VGA drivers ............................................................................. 2

2.1 Driver installation ....................................................... 2

2.2 Updating the Windows display driver ...................... 11

2.3 Removing display driver ........................................... 13

3. Utilities .................................................................................. 14

3.1 Utilities installation .................................................. 15

3.2 Removing installed utilities ...................................... 18

4. Accessories Drivers ............................................................... 20

4.1 Installing Webcam driver ......................................... 20

4.2 Installing the Gamepad drivers ................................ 22

4.3 Removing Webcam driver ........................................ 24

4.4 Removing the Gamepad drivers ............................... 25

5. ASUS Contact information .................................................... 26

6. Other information .................................................................. 27

6.1 Browse Support CD ................................................. 27

6.3 View readme file ...................................................... 28

Appendix: Basic troubleshooting ..................................................... A-1

iiiiii

iii

iiiiii

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

Federal Communications Commission StatementFederal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Canadian Department of Communication StatementCanadian Department of Communication Statement

Canadian Department of Communication Statement

Canadian Department of Communication StatementCanadian Department of Communication Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

iviv

Safety information

Electrical safetyElectrical safety

Electrical safety

Electrical safetyElectrical safety

• When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

• Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

Operation safetyOperation safety

• Before installing devices on your motherboard, carefully read all the manuals that came with the package.

• Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a

qualified service technician or your retailer.

Macrovision Corporation Product NoticeMacrovision Corporation Product Notice

Macrovision Corporation Product Notice

Macrovision Corporation Product NoticeMacrovision Corporation Product Notice

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only

Corporation

. Reverse engineering or disassembly is prohibited.

unless otherwise authorized by Macrovision

About this guide

Conventions used in this guideConventions used in this guide

Conventions used in this guide

Conventions used in this guideConventions used in this guide

To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

WARNING: WARNING:

WARNING: Information to prevent injury to yourself when

WARNING: WARNING:

trying to complete a task.

CAUTION:CAUTION:

CAUTION: Information to prevent damage to the components

CAUTION:CAUTION:

when trying to complete a task.

IMPORTANT: IMPORTANT:

IMPORTANT: Information that you MUST follow to complete a

IMPORTANT: IMPORTANT:

task.

NOTE: NOTE:

NOTE: Tips and additional information to aid in completing a

NOTE: NOTE:

task.

Where to find more informationWhere to find more information

Where to find more information

Where to find more informationWhere to find more information

Refer to the following sources for additional information and for product and software updates.

ASUS WebsitesASUS Websites

ASUS Websites

ASUS WebsitesASUS Websites The ASUS websites worldwide provide updated information on ASUS

hardware and software products. The ASUS websites are listed in the ASUS Contact Information on the inside front cover of this installation guide.

Optional DocumentationOptional Documentation

Optional Documentation

Optional DocumentationOptional Documentation Your product package may include optional documentation, such as

warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

vivi

1. Support CD information

The support CD that came with the VGA card contains useful software and several utility drivers that enhance the video features.

• The screen displays in this manual may not exactly match the display on your screen.

• Some driver and utility items in the support CD apply only to specific ASUS VGA card models.

• You may need administrator rights to install the drivers and utilities. See your Windows

2000/XP documentation for details.

• The contents of the support CD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for updates.

To begin using the support CD, simply insert the CD into your CD-ROM drive. The support CD automatically displays the Video Accelerator Video Accelerator

Video Accelerator main menu if autorun is enabled in your computer.

Video Accelerator Video Accelerator

2D/3D Graphics &2D/3D Graphics &

2D/3D Graphics &

2D/3D Graphics &2D/3D Graphics &

Click a menu itemClick a menu item

Click a menu item

Click a menu itemClick a menu item to open otherto open other

to open other

to open otherto open other installation menusinstallation menus

installation menus

installation menusinstallation menus

Click toClick to

Click to

Click toClick to display CDdisplay CD

display CD

display CDdisplay CD informationinformation

information

informationinformation

Click to viewClick to view

Click to view

Click to viewClick to view readme filereadme file

readme file

readme filereadme file

If autorun is NOT enabled in your computer, browse the contents of the support CD to locate the file SETUP.EXE. Double-click the to run the support CD installation program.

Drivers and utilities installation guideDrivers and utilities installation guide

Drivers and utilities installation guide

Drivers and utilities installation guideDrivers and utilities installation guide

Click to exitClick to exit

Click to exit

Click to exitClick to exit applicationapplication

application

applicationapplication

SETUP.EXESETUP.EXE

SETUP.EXE

SETUP.EXESETUP.EXE

2. VGA drivers

A VGA driver is the software program that makes the device work with your operating system. You can install, update or remove the display driver of your graphics card using any of the recommended methods in this section.

If you are replacing an old graphics card with a new ASUS graphics card, make sure to remove the old display driver from your system. Refer to section “2.3 Removing display drivers” for details.

After physically installing your graphics card, use any of the recommended methods in this section to install your VGA driver.

2.12.1

2.1

2.12.1

To install the VGA driver:

Method 1: Typical installationMethod 1: Typical installation

Method 1: Typical installation

Method 1: Typical installationMethod 1: Typical installation

The Typical installation method installs the most common options. We recommend this method to most users.

1. From the

2. Insert the support CD into your

3. If autorun is enabled, the 2D/3D

Driver installationDriver installation

Driver installation

Driver installationDriver installation

Found NewFound New

Found New

Found NewFound New

Hardware WizardHardware Wizard

Hardware Wizard dialog box,

Hardware WizardHardware Wizard

CancelCancel

click

Cancel to enter the

CancelCancel

Windows desktop.

CD-ROM drive.

Graphics & Video Accelerator appears automatically.

If autorun is disabled, run Setup.exeSetup.exe

Setup.exe from the root

Setup.exeSetup.exe directory of your support CD.

4. From the 2D/3D Graphics & Video Accelerator main menu,

VGA DriversVGA Drivers

click

VGA Drivers.

VGA DriversVGA Drivers

ASUS NVIDIA series graphics cardASUS NVIDIA series graphics card

ASUS NVIDIA series graphics card

ASUS NVIDIA series graphics cardASUS NVIDIA series graphics card

The Setup prepares the Install Shield Wizard which will guide you through the program setup process.

5. Click

NextNext

Next from the Install Shield

NextNext

Wizard welcome screen.

6. Select

TypicalTypical

Typical then click

TypicalTypical

NextNext

Next.

NextNext

TypicalTypical

The

Typical setup type will not include the Windows® Display Model

TypicalTypical (WDM) and VGARTD drivers. Select the WDM and VGARTD drivers.

A progress bar on the lower right-hand corner of your screen displays the progress of the driver installation process.

Custom Custom

Custom setup if you want to install

Custom Custom

Drivers and utilities installation guideDrivers and utilities installation guide

Drivers and utilities installation guide

Drivers and utilities installation guideDrivers and utilities installation guide

The wizard copies the necessary files to your computer.

The following screen displays the NVIDIA® display driver installation process.

After installing the NVIDIA

display drivers, the setup installs the ASUS Enhanced display drivers.

7. The following screen displays the Microsoft® DirectX™ setup. Select agreementagreement

agreement then click

agreementagreement

I accept theI accept the

I accept the

I accept theI accept the

NextNext

Next.

NextNext

ASUS NVIDIA series graphics cardASUS NVIDIA series graphics card

ASUS NVIDIA series graphics card

ASUS NVIDIA series graphics cardASUS NVIDIA series graphics card

8. Click

NextNext

Next to continue or

NextNext

to return from previous screen

Cancel Cancel

Cancel to abort installation.

Cancel Cancel

The Microsoft® DirectX™ setup installs components.

BackBack

Back

BackBack

9. The Microsoft® DirectX™ setup notifies you to restart your computer to apply changes. Click Finish.Finish.

Finish.

Finish.Finish.

The ASUS VGA installation program will restart your computer after all components are installed into your computer.

The final tasks of the setup process is displayed on the progress bar.

Drivers and utilities installation guideDrivers and utilities installation guide

Drivers and utilities installation guide

Drivers and utilities installation guideDrivers and utilities installation guide

10. After the installation is complete, select to restart my computerto restart my computer

to restart my computer

to restart my computerto restart my computer nownow

n o w then click

nownow

Method 2: Custom installationMethod 2: Custom installation

Method 2: Custom installation

Method 2: Custom installationMethod 2: Custom installation

Yes, I wantYes, I want

Yes, I want

Yes, I wantYes, I want

FinishFinish

Finish.

FinishFinish

The Custom installation method allows you to select the components you want to install. We recommend this method to advanced users.

1. From the Hardware WizardHardware Wizard

Hardware Wizard dialog box,

Hardware WizardHardware Wizard click

Found NewFound New

Found New

Found NewFound New

CancelCancel

Cancel to enter the

CancelCancel

Windows desktop.

2. Insert the support CD into your CD-ROM drive.

3. If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically.

If autorun is disabled, run Setup.exeSetup.exe

Setup.exe from the root

Setup.exeSetup.exe directory of your support CD.

4. From the 2D/3D Graphics & Video Accelerator main menu,

VGA DriversVGA Drivers

click

VGA Drivers.

VGA DriversVGA Drivers

The Setup prepares the Install Shield Wizard which will guide you through the program setup process.

ASUS NVIDIA series graphics cardASUS NVIDIA series graphics card

ASUS NVIDIA series graphics card

ASUS NVIDIA series graphics cardASUS NVIDIA series graphics card

+ 26 hidden pages