8pc. PROFESSIONAL
7848
BRAKE TOOL SET
www.astrotools.com
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year from the date of 1st use.
Astro reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused
by accident, alteration, or misuse are not covered by this warranty.
•If one part of this product fails, please do not return the entire product.
Astro will replace free of charge component parts of this product that fail
within 1 year of first use by the original user. Items included in this category
include but are not limited to kits, hand tool kits and any other product where
there are multiple items or components that make up the unit. Please contact
the phone number below in order to obtain the replacement components
covered under warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1 YEAR LIMITED WARRANTY
Product Information
Important
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
Unpacking
When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
8pc. PROFESSIONAL BRAKE TOOL SET
Page 1
372 Old US Highway 52 South
Mount Airy, NC 27030
8pc. PROFESSIONAL
7848
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
BRAKE TOOL SET
78481 78488784877848678485784847848378482
78481 Spring Compressor
For use on 5/8" diameter retainer springs found on most newer vehicles.
Industrial finish.6.29" long.
78482 Brake Spring Installer
Installs brake springs on 1979 and later GM brakes on X, J, A and N body
styles. Industrial finish.9.37" long.
78483 Spring Removal Tool
For use on 5/8" diameter retainer springs found on most newer vehicles.
Industrial finish. 6.1" long.
78484 Brake Retaining Spring Tool
For removing brake springs on full-size cars and pick-ups with drum style
brakes. Industrial finish, 9.37" long.
78485 Brake Spring Pliers
Designed by professional mechanics to remove and replace springs,
this narrow point with "Straight-in-line" pull on spring design
includes special socket for application on all hydraulic brakes.
78486 Brake Adjusment Spoon
Tool adjusts clearance between drum brake and brake shoe.It fits through a
slot in the backing plate and turns the star wheel. Ends of tool are offset for
hard-to -reach areas on small cars
78487 Brake Adjusment Spoon
Adjusts the clearance between the drum and brake shoe by fitting tool
through slot in backing plate and turning the star wheel. Tool is designed to
clear the axle housing to reach the slot on top of the backing plate on some
trucks.
78488 Mini Adjustment Spoons
Adjusts the clearance between drum and brake shoe
78481
78482
78483
78484
78485
78486
78487
78488
Spring Compressor
Brake Spring Installer
Spring Removal Tool
Brake Retaining Spring Tool
Brake Spring Pliers
Brake Adjustment Spoon
Brake Adjustment Spoon
Mini Adjustment Spoons
1
1
1
1
1
1
1
1
Page 2
20131028