Page 1
7838
PR OD UCT I NFO RMATIO N:
• Allows easy removal of most popular types of
pitman arms, tie rods, and ball joints
• Press type ball joint separator allows for ball joint
removal without damage to boots and other parts
• Blow molded case for easy storage and transport
• Set Includes:
1- Pitman Arm/Tie Rod End Puller
1- Ball Joint Separator
1- Pitman Arm Puller
1- Ball Joint/Tie Rod End Remover
1- Tie Rod/Inner Bearing Race Puller
FRONT END SERVICE SET
www.astrotools.com
1 YEAR LIMITED WARRANTY
• Astro Pneumatic Tool Co. warrants our products to the original user against defective
material or workmanship for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the right to determine whether the
product failed because of defective material, workmanship or other causes and to charge
back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products
covered under this warranty free of charge. The distributor should direct the original user
to return the product (with the exceptions listed below) with the distributor’s name,
address, adequate proof of date of purchase or a copy of warranty card, and a short note
explaining the problem. Failures caused by accident, alteration, or misuse are not
covered by this warranty.
• If one part of this product fails, please do not return the entire product. Astro will
replace free of charge component parts of this product that fail within 1 year of first
use by the original user. Items included in this category include but are not limited
to kits, hand tool kits and any other product where there are multiple items or
components that make up the unit. Please contact the phone number below in
order to obtain the replacement components covered under warranty.
• Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and may
not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including warranties
of merchantability and fitness for a particular purpose. Some states do not allow the
exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you.
PLEASE DO N OT RETURN ANY PROD UCT WITHOUT CALLI NG
When unpacking, check the parts diagram and part number
listing on page 3 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
1-800 -221-9705 FOR INS TRUCTIONS
Unpacking
FRONT END SERVICE SET
IMPORTANT
MADE IN TAIWAN
Page 1
Page 2
7838
FRONT END SERVICE SET
Page 2
Page 3
Model:
Product Type:
7838-A01B
372 Old US Highway 52 South
Mount A iry, NC 270 30
7838-A02B
7838-A03D
7838-A05D
7838-A04B
7838
FRONT END SERVICE SET
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
7838-A02A
7838-A01 7838-A02
7838-A05D
7838-A04
7838-A05 7838-case
7838-A03
7838-A03A
7838-A03C
7838-A03E
7838-A04A
7838-A03B
7838-A05A
7838-A01A
7838-A01
7838-A01A
7838-A01B
7838-A02
7838-A02A
7838-A02B
7838-A03
7838-A03A
7838-A03B
7838-A03C
7838-A03D
Pitman Arm Puller Assembly (5/8" x 18T)
Arm
Screw
Ball Joint Separator (5/8" x 18T)
Arm
Screw
Tie Rod End Lifter Assembly (9/16" x 12T)
Right Arm
Left Arm
Bushing
Screw
1
1
1
1
1
1
1
1
1
1
1
Page 3
7838-A03E
7838-A04
7838-A04A
7838-A04B
7838-A05
7838-A05A
7838-A05B
7838-A05C
7838-A05D
7838-case
7838-A05C
7838-A05B
Cap
Tie Rod End Lifter Assembly (M12 x 1.75T)
Arm
Screw
Tie Rod End Lifter Assembly (M16 x 1.5T)
Arm
Base
Pin
Screw
Case
1
1
1
1
1
1
1
1
1
1
Loading...