Astro 7824 User Manual

7824

BEARING RACE AND SEAL DRIVER - MASTER SET

www.astrotools.com

Product Information

• Easier to insert wheel bearing race and seals without
damaging race and axle housing

• Includes nine disc sizes to fit most standard wheel bearings

• Turn discs over to drive seals

• Blow molded case for easy storage and transport

• Set includes the following parts:
1- No. 1 – Size 1.565"
1- No. 2 – Size 1.750"
1- No. 3 – Size 1.965"
1- No. 4 – Size 2.325"
1- No. 5 – Size 2.470"
1- No. 6 – Size 2.555"
1- No. 7 – Size 2.830"
1- No. 8 – Size 2.995"
1- No. 9 – Size 3.180"
1- No. 10 – Drive Handle with Flange Hex Bolt

•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year from the date of 1st use.
Astro reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused

by accident, alteration, or misuse are not covered by this warranty.

•If one part of this product fails, please do not return the entire product.
Astro will replace free of charge component parts of this product that fail
within 1 year of first use by the original user. Items included in this category
include but are not limited to kits, hand tool kits and any other product where
there are multiple items or components that make up the unit. Please contact
the phone number below in order to obtain the replacement components
covered under warranty.

•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.

•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:

Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030

PLEASE CALL 1-800 -221-9705

FOR REPAIR AND RETURN INSTRUCTIONS

Unpacking

1 YEAR LIMITED WARRANTY

When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.

Bearing Race and Seal Driver - Master Set

Important

372 Old US Highway 52 South
Mount Airy, NC 27030

Bearing Race and Seal Driver

7824

Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.

- Master Set

7824-01

7824-02

7824-10

7824-03

7824-04

7824-05

7824-06

7824-07

7824-08

7824-09

7824-01
7824-02
7824-03
7824-04
7824-05
7824-06
7824-07
7824-08
7824-09
7824-10

Disc Size 1.565"
Disc Size 1.750"
Disc Size 1.965"
Disc Size 2.325"
Disc Size 2.470"
Disc Size 2.555"
Disc Size 2.830"
Disc Size 2.995"
Disc Size 3.180"
Drive Handle with

Flange Hex Bolt

Page 2Page 1

1
1
1
1
1
1
1
1
1
1