Designed to Meet Safety Agency
Standards such as UL, CSA, IEC,
VDE, TÜV and the European
Norms including the Low Voltage
Directive 73/23/EEC
Fully-Automated,
Multi-Functional
Electrical Safety
Compliance Analyzers
Instrument shown above is QUADCHEK®II
OPERATOR-FRIENDLY FEATURES
Manual reset to re-activate
after failure detect
Power-on switch
Push button switch
to start test
(QUADCHEK
®
II) High
current output terminal
(HypotULTRA®II) Ground
Continuity terminal
Keypad for test setup
and data-entry
LED'S indicate built-in scanner setup
(only active with scanner option installed)
LCD Display to
monitor test functions
LED panel to
indicate test status
Return terminal
High voltage terminal
Indicator light to warn
that high voltage is active
Optional scanner
high voltage outputs
Optional scanner high current
outputs (QUADCHEK
®
II only)
External scanner 1 control
High voltage terminal
External scanner 2 control
Remote outputs
Remote inputs
GPIB Interface (RS-232 or
printer interfaces also available)
Cooling fan
Return terminal
High current
terminal
Input power
connector
Fuse
Input voltage
selector switch
Tilt up front feet
• GPIB (IEEE-488), RS-232 or Printer
Interfaces
• Available in 500 VA Output Versions
• Optional Built-In & External Scanner
Capabilities
• Output of all Test Data can be
Viewed Through a Single LCD Display
• Interconnects to the RUNCHEK
™
Functional Run Test System or the
LINECHEK
™
Line Leakage Tester to Form
a Complete Test System
• Patented RAMP HI/CHARGE LO Circuit for
Efficient DC Testing
• Perform all Tests Through a Single DUT
(
Device Under Test)Connection
Loading...