No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
e terms HDMI® and HDMI High-Denition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
CE Warning
is device complies with directive 2014/53/EU issued by the Commision of the European
Community.
is equipment complies with EU radiation exposure limits set forth for an uncontrolled
environment.
is equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
Operations in the 5.15-5.35GHz band are restricted to indoor usage only.
Radio transmit power per transceiver ty pe
FunctionFrequencyMaximum Output Power (EIRP)
2400-2483.5 MHz18.5 + / -1.5 dbm
5150-5250 MHz21.5 + / -1.5 dbm
WiFi
Bluetooth2400-2483.5 MHz8.5 + / -1.5 dbm
5250-5350 MHz
5470-5725 MHz
18.5 + / -1.5 dbm (no TPC)
21.5 + / -1.5 dbm (TPC)
25.5 + / -1.5 dbm (no TPC)
28.5 + / -1.5 dbm (TPC)
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 7
1.4 I/O Panel 9
1.5 WiFi-802.11ax Module and ASRock WiFi 2.4/5 GHz Antenna 10
Chapter 2 Installation 13
2.1 Installing the CPU 14
2.2 Installing the CPU Fan and Heatsink 16
2.3 Installing Memory Modules (DIMM) 24
2.4 Expansion Slots (PCI Express Slots) 27
2.5 Jumpers Setup 28
2.6 Onboard Headers and Connectors 29
2.7 Post Status Checker 35
2.8 CrossFireXTM and Quad CrossFireXTM Operation Guide 36
2.8.1 Installing Two CrossFireXTM-Ready Graphics Cards 36
ank you for purchasing ASRock X570 Phantom Gaming 4 WiFi ax motherboard,
a reliable motherboard produced under ASRock ’s consistently stringent quality
control. It delivers excellent performance with robust design conforming to
ASRock’s commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the
motherboard and step-by-step installation guides. Chapter 3 contains the operation
guide of the soware and utilities. Chapter 4 contains the conguration guide of
the BIOS setup.
Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice. In case any
modications of this documentation occur, the updated version will be available on
ASRock’s website w ithout f urther notice. If you require technical support relate d to
this motherboard, please vi sit our website for s pecic information about the model
you are using. You may nd the l atest VGA cards and CPU suppor t list on ASRock’s
website a s well. ASRock website ht tp://www.a srock.com.
Please realize that the re is a certain r isk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technol ogy, or using
third-party overclocking tool s. Overclocking may aect your system’s stability, or
even cause dam age to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for poss ible damage caused by
overclocking.
•
FCC, CE
•
ErP/EuP ready (ErP/EuP ready power supply is required)
•
1.3 Motherboard Layout
DDR 4_A 2 (6 4 b it, 288 -pi n mo dul e)
DDR 4_A 1 (6 4 b it, 288 -pi n mo dul e)
DDR 4_B 2 (6 4 b it, 288 -pi n mo dul e)
DDR 4_B 1 (6 4 b it, 288 -pi n mo dul e)
ATXP WR 1
PCIE1
USB 3.2 G en1
T:U SB3
B: USB4
USB 3.2 G en1
T:U SB5
B: USB6
Top:
LINE IN
Center :
FRONT
Bottom :
MIC IN
HDLED RESET
PLED PWRBTN
PANEL1
1
1
SPK_PLE D1
1
HD_AUDI O1
SATA3_5_6
SATA3_7_8
SATA3_4
8
10
14
12
13
15
16
SATA3_1_2
17
18
19
24
USB_2_3
1
25
1
7
6
20
USB 3.2 Ge n1
T:U SB1
B: USB2
PS2
Keybo ard
/Mous e
26
CPU_FAN 1
9
1
TPMS1
M2_1
CHA_FAN 3/WP
CPU_FAN2 /WP
5
4
USB3_7 _8
1
22
21
RoH S
PCIE4
Top:
RJ-45
AMD
Pre miu m
X57 0
SOCKET AM 4
CHA_FAN2 /WP
28
29
27
ADDR_LE D1
1
3
PCIE2
DP1
2
11
TB1
1
X57 0 Phan tom Ga min g 4 Wi Fi ax
RGB_LED2
1
1
USB_1
ATX12V1
PCIE3
CMO S
Bat ter y
CHA_FAN 1/WP
CLRCMOS 1
1
23
HDM I1
USB 3.2 G en2
T:U SB1
B: USB2
SPI_TP M_J1
1
SATA3_3
M2_3
M2_2
COM1
1
RGB_LED1
1
USB3_9 _10
1
WiFi -802 .11ax
Modu le
X570 Phantom Gaming 4 WiFi ax
English
7
No. Description
1ATX 12V Power Connector (ATX12V1)
2CPU Fan Connector (CPU_FAN1)
3CPU Fan / Waterpump Fan Connector (CPU_FAN2/WP)
42 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
52 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
6RGB LED Header (RGB_LED2)
7ATX Power Connector (ATXPWR1)
8USB 3.2 Gen1 Header (USB3_7_8)
9AMD LED Fan USB Header (USB_1)
10 SPI TPM Header (SPI_TPM_J1)
11 Chassis Fan / Waterpump Fan Connector (CHA_FAN1/WP)
12 SATA3 Connector (SATA3_5_6)
13 SATA3 Connector (SATA3_7_8)
14 SATA3 Connector (SATA3_1_2)
15 Power LED and Speaker Header (SPK_PLED1)
16 SATA3 Connector (SATA3_4)
17 SATA3 Connector (SATA3_3)
18 System Panel Header (PANEL1)
19 Clear CMOS Jumper (CLRCMOS1)
20 USB 2.0 Header (USB_2_3)
21 USB 3.2 Gen1 Header (USB3_9_10)
22 Chassis Fan / Waterpump Fan Connector (CHA_FAN2/WP)
23 Addressable LED Header (ADDR_LED1)
24 RGB LED Header (RGB_LED1)
25 COM Port Header (COM1)
26 TPM Header (TPMS1)
27 Front Panel Audio Header (HD_AUDIO1)
28 underbolt AIC Header (TB1)
29 Chassis Fan / Waterpump Fan Connector (CHA_FAN3/WP)
English
8
1.4 I/O Panel
1
X570 Phantom Gaming 4 WiFi ax
3
2
4
119
8
6710
5
No. DescriptionNo. Description
1PS/2 Mouse/Keyboard Port7USB 3.2 Gen2 Type-A Port (USB31_1_2)
** Function of the Au dio Ports in 7.1-channel Con guration:
PortFunction
Light Blue (Rear panel)Rear Speaker Out
Lime (Rear panel)Front Speaker Out
Pink (Rear panel)Central /Subwoofer Speaker Out
Lime (Front panel)Side Speaker Out
English
9
1.5 WiFi-802.11ax Module and ASRock WiFi 2.4/5 GHz Antenna
WiFi-802.11ax + BT Module
is motherboard comes with an exclusive WiFi 802.11 a/b/g/n/ax + BT v5.2 module
that oers support for WiFi 802.11 a/b/g/n/ax connectivity standards and Bluetooth
v5.2. WiFi + BT module is an easy-to-use wireless local area network (WLAN) adapter
to support WiFi + BT. Bluetooth v5.2 standard features Smart Ready technology that
adds a whole new class of functionality into the mobile devices. BT 5.2 also includes
Low Energy Technology and ensures extraordinary low power consumption for PCs.
e 2T2R WiFi solution sets a WiFi high speed standard and oers max link rate up
to 2.4Gbps.
* e transmission speed may vary according to the environment.
ASRock WiFi 2.4/5 GHz Antenna
English
10
WiFi Module and WiFi Antenna Installation Guide
Step 1
Prepare the SMA Wi-Fi Antenna Cables
and WiFi 2.4/5 GHz Antenna that comes
with the package.
Step 2
Attach the SMA Wi-Fi Antenna Cables to
the WiFi Module.
Step 3
Insert the RP-SMA Wi-Fi Antenna Con-
nectors to the antenna ports on the I/O
shield.
X570 Phantom Gaming 4 WiFi ax
Step 4
Fasten the screw nuts to secure the
antenna connectors.
English
11
Step 5
Connect the WiFi 2.4/5 GHz
Antenna to the antenna connectors. Turn
the antenna clockwise until it is securely
connected.
Step 6
Set the WiFi 2.4/5 GHz Antenna at 90-de-
gree angle.
*You may need to adjust the direction of
the antenna for a stronger signal.
English
12
X570 Phantom Gaming 4 WiFi ax
Chapter 2 Installation
is is an ATX form factor motherboard. Before you install the motherboard, study
the conguration of your chassis to ensure that the motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard.
•
Failure to do so may cause physical injuries to you and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboard’s components,
•
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
•
Whenever you uninstall any components, place them on a grounded anti-static pad or
•
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-
•
tighten the screws! Doing so may damage the motherboard.
13
English
2.1 Installing the CPU
Unplug all power cables be fore installing the CPU.
1
English
14
2
X570 Phantom Gaming 4 WiFi ax
3
15
English
2.2 Installing the CPU Fan and Heatsink
Aer you install the CPU into this motherboard, it is necessary to install a larger
heatsink and cooling fan to dissipate heat. You also need to spray thermal grease
between the CPU and the heatsink to improve heat dissipation. Ma ke sure that the
CPU and the heatsink are securely fastened and in good contact with each other.
Please turn o the power or remove the power cord before changing a CPU or heatsink.
Installing the CPU Box Cooler SR1
1
English
16
2
X570 Phantom Gaming 4 WiFi ax
3
4
1
N
FA
_
U
P
C
English
17
Installing the AM4 Box Cooler SR2
1
2
English
18
X570 Phantom Gaming 4 WiFi ax
3
19
English
4
1
N
FA
_
U
P
C
English
20
Installing the AM4 Box Cooler SR3
1
X570 Phantom Gaming 4 WiFi ax
2
English
21
Loading...
+ 65 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.