No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the manual or product.
1. Advanced Menu ............................................................. 22
2. Security Menu ................................................................. 26
3. Power Menu ................................................................... 27
4. Boot Menu ....................................................................... 28
5. Exit Menu ......................................................................... 29
3
Chapter 1 Introduction
Thank you for purchasing ASRock P4i45GL / P4i45GV motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
Chapter 1 and 2 of this manual contain introduction of the motherboard and step-bystep installation guide for new DIY system builders. Chapter 3 and 4 contain basic
BIOS setup and Support CD information.
For advanced users’ reference, the Appendix appearing on page 22 offers more
advanced BIOS setup information.
Because the motherboard specifications and the BIOS software
might be updated, the content of this manual will be subject to
change without notice. In case any modifications of this manual
occur, the updated version will be available on ASRock website
without further notice. You may find the latest memory and CPU
support lists on ASRock website as well.
ASRock website http://www.asrock.com
1.1 Package Contents
ASRock P4i45GL or P4i45GV motherboard
(Micro ATX form factor: 9.6" x 7.0", 24.4 x 17.8 cm)
ASRock P4i45GL / P4i45GV Quick Installation Guide
ASRock Intel-Intel Support CD
1 cable for IDE devices (1 x ATA 66 / 100)
1 cable for floppy drive (1 x ribbon cable)
1 ASRock I/O shield
1 COM port bracket
4
1.2 Specifications
Platform:Micro ATX form factor (9.6" x 7.0", 24.4 x 17.8 cm)
CPU:Socket 478 for Intel® Pentium® 4 / Celeron® processor
Chipsets:North Bridge (P4i45GL):
Intel® 845GL chipsets,
standard FSB 400MHz (see CAUTION 1),
Max. 533 MHz (at overclocking mode, see CAUTION 2);
North Bridge (P4i45GV):
Intel® 845GV chipsets, standard FSB 533 MHz,
supports Hyper-Threading Technology (see CAUTION 3);
CPU temperature sensing (ASRock U-COP);
Chassis temperature sensing;
CPU overheat shutdown to protect CPU life (ASRock U-COP)
(see CAUTION 5);
Voltage monitoring: +12V, +5V, +3V, Vcore;
CPU fan tachometer; Chassis fan tachometer
PCI slots:2 slots with PCI Specification 2.2
AMR slot:1 slot, supports ASRock MR card (Optional)
USB 2.0:4 default USB 2.0 ports and 1 extra set of header for 2 additional
USB 2.0 ports upgrade (see CAUTION 6)
ASRock I/OTM:PS/2: 1 keyboard port / 1 mouse port;
1 RJ 45 port; 4 rear default USB 2.0 ports;
1 VGA port; 1 parallel port: ECP/EPP support;
Audio Jack: Line Out/ Line In/ Microphone + Game port
5
BIOS:AMI legal BIOS; Supports “Plug and Play”;
ACPI 1.1 compliance wake up events;
Supports jumperfree; SMBIOS 2.3.1 support;
CPU frequency stepless control
(only for advanced users’ reference, see CAUTION 7)
OS:Microsoft® Windows® 98SE / ME / 2000 / XP compliant
CAUTION!
1. P4i45GL motherboard may be fine tuned to support higher
CPU bus frequencies on certain condition. Please refer to
“NOTE” on page 7 for the details.
2. If the installed CPU runs with the FSB frequency at 533MHz
on P4i45GL motherboard, it will support PC2100(DDR266)
and PC2800(DDR350).
3. About the setting of “Hyper Threading Technology”, please
check page 22.
4. P4i45GV motherboard will support PC2700(DDR333) when
the installed CPU runs with the FSB frequency at 533MHz.
5. While CPU overheat is detected, the system will automatically
shutdown. Please check if the CPU fan on the motherboard
functions properly before you resume the system. To improve
heat dissipation, remember to spray thermal grease between
the CPU and the heatsink when you install the PC system.
6. Power Management for USB 2.0 works fine under Microsoft
Windows® XP. It may not work properly under Microsoft
Windows® 98/ME/2000. Please refer to Microsoft® official
document at
7. Although P4i45GL / P4i45GV offers stepless control,it is not
recommended to perform over clocking. When the CPU frequency of P4i45GL / P4i45GV is set to perform over clocking,
other clocks, such as PCI clock and Memory clock will also
be overclocked proportionally. Frequencies other than the
recommended CPU bus frequencies may cause the instability of the system or damage the CPU and the motherboard.
®
®
6
NOTE
P4i45GL may be fine tuned to support higher CPU front side bus frequencies on certain
condition. Please refer to the table below for the details.
CPU FSBConfiguration Note
P4i45GL533 MHz1. It supports DDR266 memory module
at both DDR DIMM1 and DIMM2.
2. It supports DDR350 memory module
ONLY at DDR DIMM1.
3. To support DDR350, please set DDR350
in BIOS DRAM Frequency.
4. It supports CL=2 and CL=2.5 only.
The Recommended Memory Modules list for
P4i45GL motherboard.
FSB 533MHz / DDR350 Mode
DRAMSIZE TYPECELLCELL NO.SINGLE SIDE /
VENDOR(MB)VENDORDOUBLE SIDE
TWINMOS256DDR333TWINMOS TMD7608F8E60BSINGLE SIDE
TWINMOS256DDR400TWINMOS TMD7608F8E50BSINGLE SIDE
TWINMOS512DDR400TWINMOS TMB7608F8E50BDOUBL E SIDE
TWINMOS512DDR400M.TECT TD7608F8E50BDOUBL E SIDE
ADATA256DDR400WINBOND 424764800SINGLE SIDE
ADATA256DDR400WINBOND W942508BH-5SINGLE SIDE
ADATA256DDR400ADATAADD8608A8A-4.5BSINGLE SIDE
KINGMAX256DDR400KINGMAX KDL388P4EA-50SINGLE SIDE
KINGMAX512DDR400KINGMAX KDL388P4EA-50DO UBLE SI DE
KINGSTON256DDR333MOSELV58C2256804SAT6SINGLE SIDE
KINGSTON512DDR333INFINEON HYB25D256800BT-6 DOUBLE SIDE
MICRON256DDR333MICRON46V32M8-6TCSINGLE SIDE
MICRON256DDR400MICRON46V16M8DOU BLE SID E
INFINEON128DDR400INFINEON HYB25D256800BT-5 SINGLE SIDE
INFINEON256DDR400INFINEON HYB25D256800BT-5 SINGLE SIDE
TRANSCEND 256 DDR333SAMSUNG K4H560838D-TCB3SINGLE SIDE
APACER256DDR333SAMSUNG K4H560838D-TCB3SINGLE SIDE
Since the memory types are changing rapidly, please visit ASRock website
(http://www.asrock.com/support/index.htm) for the latest recommended memory support list.