Asrock J3160DC-ITX User Manual

Version 1.0

Published January 2016

Copyright©2016 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.

Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: [phone] ext.123 (Standard International call charges apply)

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Motherboard Layout 5

1.4 I/O Panel 7

Chapter 2 Installation 9

2.1 Installing Memory Modules (SO-DIMM) 10

2.2 Expansion Slots (PCI Express Slots) 12

2.3 Jumpers Setup 13

2.4 Onboard Headers and Connectors 14

Chapter 3 Software and Utilities Operation 18

3.1 Installing Drivers 18

3.2 ASRock Live Update & APP Shop 19

3.2.1 UI Overview 19

3.2.2 Apps 20

3.2.3 BIOS & Drivers 23

3.2.4 Setting 24

3.3 Enabling USB Ports for Windows® 7 Installation 25

Chapter 4 UEFI SETUP UTILITY 28

4.1 Introduction 28

4.1.1 UEFI Menu Bar 28

4.1.2 Navigation Keys 29

4.2 Main Screen 30

4.3 Advanced Screen 31

4.3.1 CPU Conguration 32

4.3.2 Chipset Conguration 33

4.3.3 Storage Conguration 35

4.3.4 IntelRMT Conguration 37

4.3.5 Super IO Conguration 38

4.3.6 ACPI Conguration 39

4.3.7 USB Conguration 41

4.3.8 Trusted Computing 42

4.4 Tools 43

4.5 Hardware Health Event Monitoring Screen 45

4.6 Security Screen 46

4.7 Boot Screen 47

4.8 Exit Screen 50

Chapter 1 Introduction

ank you for purchasing ASRock J3160DC-ITX motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

In this manual, Chapter 1 and 2 contains the introduction of the motherboard

and step-by-step installation guides. Chapter 3 contains the operation guide of the

soware and utilities. Chapter 4 contains the conguration guide of the BIOS setup.

Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice. In case any
modications of this documentation occur, the updated version will be available on
ASRock’s website w ithout f urther notice. If you require technical support relate d to
this motherboard, please vi sit our website for s pecic information about the model
you are using. You may nd the l atest VGA cards and CPU suppor t list on ASRock’s
website a s well. ASRock website ht tp://www.a srock.com.

1.1 Package Contents

ASRock J3160DC-ITX Motherboard (Mini-ITX Form Factor)

•

ASRock J3160DC-ITX Quick Installation Guide

•

ASRock J3160DC-ITX Support CD

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

2 x Serial ATA (SATA) Power Cables (Optional)

•

1 x 65W DC-in 19V 3.42A Power Adapter (Optional)

•

1 x I/O Panel Shield

•

1 x WiFi Module Screw

•

J3160DC-ITX

English

1

1.2 Specications

Platform

CPU

Memory

Expansion
Slot

•

•

•

•

•

•

•

* If only one SO-DIMM module is installed, please install it into
DDR3_A1.

•

•

* Due to the power limitation and PCIe bandwidth (x1) VGA

cards are not supported.

J3160DC-ITX

Mini-ITX Form Factor
Solid Capacitor design

Intel® Quad-Core Processor J3160 (up to 2.24 GHz)

Dual Channel DDR3/DDR3L Memory Technology
2 x DDR3/DDR3L SO-DIMM Slots
Supports DDR3/DDR3L 1600/1066 non-ECC, un-buered
memory
Max. capacity of system memory: 16GB
(see CAUTION)

1 x PCI Express 2.0 x1 Slot
1 x Half-size Mini-PCI Express Slot

Graphics

• Integrated Intel® HD Graphics 400: 12 EUs inside (Up to
700MHz)

• DirectX 11.1, Pixel Shader 5.0

• ree graphics output options: DVI-D, HDMI and

DisplayPort 1.1a

• Supports Triple Monitor

• Supports HDMI with max. resolution up to 4K x 2K

(3840x2160) @ 30Hz or 2560x1600 @ 60Hz

• Supports DVI-D with max. resolution up to 1920x1200 @
60Hz

• Supports DisplayPort 1.1a with max. resolution up to 4K x 2K
(3840x2160) @ 30Hz or 2560x1600 @ 60Hz

• Supports Auto Lip Sync, xvYCC and HBR (High Bit Rate
Audio) with HDMI Port (Compliant HDMI monitor is
required)

• Supports HW Accelerated Decoders: H.264 @ level 5.2, H.265/
HEVC @ level 5 (GPU accelerated), JPEG, VP8

• Supports HDCP with DVI-D, HDMI and DisplayPort 1.1a
Ports

• Supports Full HD 1080p Blu-ray (BD) playback with DVI-D,
HDMI and DisplayPort 1.1a Ports

English

2

Audio

LAN

Rear Panel
I/O

7.1 CH HD Audio with Content Protection (Realtek ALC892

•

Audio Codec)
Premium Blu-ray Audio support

•

Supports Surge Protection (ASRock Full Spike Protection)

•

ELNA Audio Caps

•

PCIE x1 Gigabit LAN 10/100/1000 Mb/s

•

Realtek RTL8111GR

•

Supports Wake-On-WAN

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection (ASRock Full Spike

•

Protection)
Supports LAN Cable Detection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

•

1 x DC Jack (Compatible with the 19V power adapter)

•

* If you install 4 HDDs, please use the 90W DC-in 19V power
adapter.

1 x PS/2 Mouse/Keyboard Port

•

1 x DVI-D Port

•

1 x HDMI Port

•

1 x DisplayPort 1.1a

•

2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full

•

Spike Protection))
4 x USB 3.0 Ports (ASMedia ASM1074 hub) (Supports ESD

•

Protection (ASRock Full Spike Protection))
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

•

LED)
HD Audio Jacks: Side Speaker / Rear Speaker / Central / Bass

•

/ Line in / Front Speaker / Microphone

English

3

Storage

Connector

2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

•

Hot Plug
2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, sup-

•

port NCQ, AHCI and Hot Plug

1 x Print Port Header

•

1 x COM Port Header

•

1 x TPM Header

•

1 x Chassis Intrusion Header

•

1 x CPU Fan Connector (3-pin)

•

BIOS
Feature

Hardware
Monitor

1 x Chassis Fan Connector (3-pin)

•

2 x SATA Power Connectors

•

1 x Front Panel Audio Connector

•

1 x SPDIF Out Connector

•

2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD

•

Protection (ASRock Full Spike Protection))
1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD

•

Protection (ASRock Full Spike Protection))

* USB3_3_4 is shared with USB_5_6.

AMI UEFI Legal BIOS with GUI support

•

Supports Plug and Play

•

ACPI 5.0 compliant wa ke up events

•

Supports jumperfree

•

SMBIOS 2.7 support

•

CPU/Chassis temperature sensing

•

CPU/Chassis Fan Tachometer

•

CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

•

CPU temperature)
CPU/Chassis Fan multi-speed control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

•

J3160DC-ITX

Microso® Windows® 10 32-bit / 10 64-bit / 8.1 32-bit / 8.1 64-

OS

Certica­tions

* For detailed product information, please visit our website: http://ww w.asrock.com

Due to limitation, the actual memory size may be less than 4GB for the reservation
for system usage under Windows® 32- bit operating systems . Windows® 64-bit operat­ing systems do not have such limitations. You can use ASRock XFast RAM to utilize
the memory that Windows® cannot use.

•

bit / 7 32-bit / 7 64-bit

* To install Windows® 7 64-bit OS, a modied installation disk
with xHCI drivers packed into the ISO le is required. Please
refer to page 25 for more detailed instructions.
* For the updated Windows® 10 driver, please visit ASRock 's
website for details: http://ww w.asrock.com

FCC, CE, WHQL

•

ErP/EuP ready (ErP/EuP ready power supply is required)

•

English

4

1.3 Motherboard Layout

PCIE 1

13

12

11

AUDIO
CODEC

1

1

TPMS1

9

3

CPU_FAN 1

HDLED RESET

PLED P WRBTN

PANEL1

1

1

SPEAKE R1

COM1

1

SATA3_A 1

Ro HS

1

HD_AU DIO1

2

4

5

6

7

BIOS
ROM

Fr on t USB 3. 0

LAN

CLRMO S1

1

USB3_ 3_4

SATA3_1

Top:
RJ- 45

USB 3 .0
T: U SB 1
B: US B2

16

1

USB_5_ 6

1

USB_3_ 4

15

SATA3_A 2

SATA3_2

USB 2.0

T: US B0

B: USB1

PS2

Key boa rd/

Mou se

DVI1

MIN I_ PC IE 1

17

Sup er

I/O

US B 3 .0
T: U SB 5
B: US B6

HDMI1

CI1

1

CMOS

Batte ry

1

LPT1

DC_ JA CK 1

Top:

SIDE SPK

Cent er:

REAR SPK

Bott om:

CTR B ASS

Top:

LINE IN

Cent er:

FRON T

Bott om:

MIC I N

SATA_PWR1

1

SATA_PWR2

1

DDR3 _A 1

DDR3 _B 1

J3160DC-ITX

DP1

SPDIF_ OUT1

1

18

21

20

22

English

5

No. Description

1 CPU Fan Connector (CPU_FAN1)

2 204-pin DDR3 SO-DIMM Slot (DDR3_B1)

3 204-pin DDR3 SO-DIMM Slot (DDR3_A1)

4 SATA Power Connector (SATA_PWR1)

5 SATA Power Connector (SATA_PWR2)

6 USB 3.0 Header (USB3_3_4)

7 USB 2.0 Header (USB_5_6)

8 Chassis Fan Connector (CHA_FAN1)

9 USB 2.0 Header (USB_3_4)

10 SATA3 Connector (SATA3_1)

11 SATA3 Connector (SATA3_2)

12 Chassis Speaker Header (SPEAK ER1)

13 System Panel Header (PANEL1)

14 Clear CMOS Jumper (CLRMOS1)

15 COM Port Header (COM1)

16 SATA3 Connector (SATA3_A2)

17 SATA3 Connector (SATA3_A1)

18 Chassis Intrusion Header (CI1)

19 Print Port Header (LPT1)

20 TPM Header (TPMS1)

21 SPDIF Out Connector (SPDIF_OUT1)

22 Front Panel Audio Header (HD_AUDIO1)

J3160DC-ITX

English

6

1.4 I/O Panel

1 2 3

4

6

5

7

English

15 12

101114 13

No. Description No. Description

1 USB 2.0 Ports (USB01) 9 Central / Bass (Orange)

2 USB 3.0 Ports (USB3_5_6) 10 USB 3.0 Ports (USB3_1_2)

3 LAN RJ-45 Port* 11 HDMI Port

4 Side Speaker (Gray) 12 DisplayPort 1.1a

5 Rear Speaker (Black) 13 DVI-D Port

6 Line In (Light Blue) 14 PS/2 Mouse/Keyboard Port

7 Front Speaker (Lime)** 15 DC Jack***

8 Microphone (Pink)

* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK L ED

SPEED LE D

LAN Por t

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

89

7

J3160DC-ITX

** If you use a 2- channel speaker, plea se connect the speake r’s plug into “Front Speaker Jack”. See the table below

for connection d etails in accordance w ith the type of speaker you use.

Audio Output

Channels

Front Speaker

(No. 7)

Rear Speaker

(No. 5)

Central / Bass

(No. 9)

Side Speaker

(No. 4)

2 V -- -- --
4 V V -- --
6 V V V --
8 V V V V

To enable Multi-Streaming, you need to connect a front panel audio cable to the
front panel audio header. Aer restarting your computer, you will nd the “Mixer”
tool on your system. Plea se select “Mixe r ToolBox” , click “Enabl e playba ck
multi-streaming”, and click “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then
you are all owed to select “Realtek HDA Primary out put” to u se the Rear Speak er,
Central/Bas s, and Front Speaker, or select “Realtek HDA Audio 2nd output” to u se
the front panel au dio.

*** Please use a 19V power adapter for the DC jack. i s jack accepts dual bar rel plugs with an inner diameter of

2.5 mm and an outer diameter of 5.5 mm , where the inner contact i s +19V (±10%) DC and the shell is GND.

Please refer to below hardware conguration for the estimated adapter powe r.

DRAM HDD PCIe Card Estimated Adapter Power

1 1 0 35W

1 2 0 50W

2 4 0 84W

1 1 <20W 60W

1 2 <20W 75W

1 1 <40W 85W

If you install 4 HDDs , please use the 90W DC-in 19V power adapter.

Due to the power limitation and PCIe bandwidth (x1) VGA cards are not supported.

When you use the DC-in power adapter, plea se use the onboard SATA power conn ector to get the power for
HDDs.

2.5 mm

5.5 mm

English

8

Chapter 2 Installation

is is a Mini-ITX form factor motherboard. Before you install the motherboard,

study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

Make sure to unplug the power cord before installing or removing the motherboard.

•

Failure to do so may cause physical injuries to you and damages to motherboard

components.

In order to avoid damage from static electricity to the motherboard’s components,

•

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

•

in the bag that comes with the components.

When placing screws to secure the motherboard to the chassis, please do not over-

•

tighten the screws! Doing so may damage the motherboard.

English

9

2.1 Installing Memory Modules (SO-DIMM)

is motherboard provides two 204-pin DDR3/DDR3L (Double Data Rate 3) SO-

DIMM slots. If only one SO-DIMM module is installed, please install it into DDR3_

A1.

It is not allowed to install a DDR or DDR2 memory module into a DDR3/DDR3L
slot; otherwise, this motherboard and SO-DIMM may be d amaged.

e SO-DIMM only ts in one cor rect orientation. It w ill cau se permanent damage
to the motherboard and the SO -DIMM if you force the SO-DIM M into the slot at
incorrect orientation.

J3160DC-ITX

10

English

1

2

English

11

2.2 Expansion Slots (PCI Express Slots)

ere is 1 PCI Express slot and 1 mini-PCI Express slot on the motherboard.

Before installing an ex pansion card, please make sure that the power supply is
switched o or the power cord is unplugged. Plea se read the documentation of the
expan sion card and mak e necessary hardware settings for the card before you start the
installation.

PCIe slot:

PCIE1 (PCIe 2.0 x1 slot) is used for PCI Express cards with x1 lane width cards.

mini-PCIe slot:

MINI_PCIE1 (mini-PCIe slot) is used for WiFi module.

J3160DC-ITX

12

English