Asrock J3160B-ITX, J3060B-ITX User Manual

Version 1.0
Published January 2016
Copyright©2016 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or tness for a particular purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. “Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 5
1.4 I/O Panel 7
Chapter 2 Installation 9
2.1 Installing Memory Modules (SO-DIMM) 10
2.2 Expansion Slots (PCI Express Slot) 12
2.3 Jumpers Setup 13
2.4 Onboard Headers and Connectors 14
Chapter 3 Software and Utilities Operation 18
3.1 Installing Drivers 18
3.2 ASRock Live Update & APP Shop 19
3.2.1 UI Overview 19
3.2.2 Apps 20
3.2.3 BIOS & Drivers 23
3.2.4 Setting 24
3.3 Enabling USB Ports for Windows® 7 Installation 25
Chapter 4 UEFI SETUP UTILITY 28
4.1 Introduction 28
4.1.1 UEFI Menu Bar 28
4.1.2 Navigation Keys 29
4.2 Main Screen 30
4.3 Advanced Screen 31
4.3.1 CPU Conguration 32
4.3.2 Chipset Conguration 33
4.3.3 Storage Conguration 35
4.3.4 IntelRMT Conguration 36
4.3.5 Super IO Conguration 37
4.3.6 ACPI Conguration 38
4.3.7 USB Conguration 40
4.3.8 Trusted Computing 41
4.4 Tools 42
4.5 Hardware Health Event Monitoring Screen 44
4.6 Security Screen 45
4.7 Boot Screen 46
4.8 Exit Screen 49
Chapter 1 Introduction
ank you for purchasing ASRock J3160B-ITX / J3060B-ITX motherboard, a
reliable motherboard produced under ASRock’s consistently stringent quality
control. It delivers excellent performance with robust design conforming to
ASRock’s commitment to quality and endurance.
In this manual, Chapter 1 and 2 contains the introduction of the motherboard
and step-by-step installation guides. Chapter 3 contains the operation guide of the
soware and utilities. Chapter 4 contains the conguration guide of the BIOS setup.
Becau se the motherboard specications and the BIOS soware might be updated, the content of this documentation will be subject to change without notice. In case any modications of this documentation occur, the updated version will be available on ASRock’s website w ithout f urther notice. If you require technical support relate d to this motherboard, please vi sit our website for s pecic information about the model you are using. You may nd the l atest VGA cards and CPU suppor t list on ASRock’s website a s well. ASRock website ht tp://www.a srock.com.

1.1 Package Contents

ASRock J3160B-ITX / J3060B-ITX Motherboard (Mini-ITX Form Factor)
•
ASRock J3160B-ITX / J3060B-ITX Quick Installation Guide
•
ASRock J3160B-ITX / J3060B-ITX Support CD
•
2 x Serial ATA (SATA) Data Cables (Optional)
•
1 x I/O Panel Shield
•
J3160B-ITX J3060B-ITX
English
1
1.2 Specications
Platform
CPU
Memory
Expansion Slot
•
•
•
•
•
•
•
•
* If only one SO-DIMM module is installed, please install it into
DDR3_A1.
•
J3160B-ITX J3060B-ITX
Mini-ITX Form Factor
Solid Capacitor for CPU power
Intel® Quad-Core Processor J3160 (up to 2.24 GHz)
(for J3160B-ITX)
Intel® Dual-Core Processor J3060 (up to 2.48 GHz)
(for J3060B-ITX)
Dual Channel DDR3/DDR3L Memory Technology
2 x DDR3/DDR3L SO-DIMM Slots
Supports DDR3/DDR3L 1600/1066 non-ECC, un-buered
memory
Max. capacity of system memory: 16GB
(see CAUTION)
1 x PCI Express 2.0 x1 Slot
Graphics
• Integrated Intel® HD Graphics 400: 12 EUs inside (Up to
700MHz)
• DirectX 11.1, Pixel Shader 5.0
• Dual graphics output: Support HDMI and D-Sub ports by
independent display controllers
• Supports HDMI with max. resolution up to 2560x1600 @
60Hz
• Supports D-Sub with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, xvYCC and HBR (High Bit Rate
Audio) with HDMI Port (Compliant HDMI monitor is
required)
• Supports HW Accelerated Decoders: H.264 @ level 5.2, H.265/
HEVC @ level 5 (GPU accelerated), JPEG, VP8
• Supports HDCP with HDMI Port
• Supports Full HD 1080p Blu-ray (BD) playback with HDMI
Port
English
2
Audio
LAN
Rear Panel I/O
7.1 CH HD Audio (Realtek ALC887 Audio Codec)
•
* To congure 7.1 CH HD Audio, it is required to use an HD
front panel audio module and enable the multi-channel audio
feature through the audio driver.
Supports Surge Protection (ASRock Full Spike Protection)
•
ELNA Audio Caps
•
PCIE x1 Gigabit LAN 10/100/1000 Mb/s
•
Realtek RTL8111GR
•
Supports Wake-On-WAN
•
Supports Wake-On-LAN
•
Supports Lightning/ESD Protection (ASRock Full Spike
•
Protection)
Supports LAN Cable Detection
•
Supports Energy Ecient Ethernet 802.3az
•
Supports PXE
•
1 x PS/2 Mouse Port
•
1 x PS/2 Keyboard Port
•
1 x Parallel Port (ECP/EPP Support)
•
1 x Serial Port: COM1
•
1 x D-Sub Port
•
1 x HDMI Port
•
2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full
•
Spike Protection))
2 x USB 3.0 Ports (Supports ESD Protection (ASRock Full
•
Spike Protection))
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
•
LED)
HD Audio Jacks: Line in / Front Speaker / Microphone
•
English
3
Storage
Connector
2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and
•
Hot Plug
1 x COM Port Header
•
1 x TPM Header
•
1 x Chassis Intrusion Header
•
1 x CPU Fan Connector (3-pin)
•
1 x Chassis Fan Connector (3-pin)
•
BIOS Feature
Hardware Monitor
1 x 24 pin ATX Power Connector
•
1 x Front Panel Audio Connector
•
2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD
•
Protection (ASRock Full Spike Protection))
1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD
•
Protection (ASRock Full Spike Protection))
* USB3_1_2 is shared with USB2_3.
AMI UEFI Legal BIOS with GUI support
•
Supports Plug and Play
•
ACPI 5.0 compliant wa ke up events
•
Supports jumperfree
•
SMBIOS 2.7 support
•
CPU/Chassis temperature sensing
•
CPU/Chassis Fan Tachometer
•
CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by
•
CPU temperature)
CPU/Chassis Fan multi-speed control
•
CASE OPEN detection
•
Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore
•
J3160B-ITX J3060B-ITX
Microso® Windows® 10 32-bit / 10 64-bit / 8.1 32-bit / 8.1 64-
OS
Certica­tions
* For detailed product information, please visit our website: http://ww w.asrock.com
Due to limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32- bit operating systems . Windows® 64-bit operat­ing systems do not have such limitations. You can use ASRock XFast RAM to utilize the memory that Windows® cannot use.
•
bit / 7 32-bit / 7 64-bit
* To install Windows® 7 64-bit OS, a modied installation disk
with xHCI drivers packed into the ISO le is required. Please
refer to page 25 for more detailed instructions.
* For the updated Windows® 10 driver, please visit ASRock 's
website for details: http://ww w.asrock.com
FCC, CE, WHQL
•
ErP/EuP ready (ErP/EuP ready power supply is required)
•
English
4

1.3 Motherboard Layout

PCIE 1
ATXP WR1
AUDIO CODEC
1
TPMS1
Sup er
I/O
PS2
Key boa rd
PS2
Mou se
DDR 3_ B1
DDR3 _A 1
CPU_FAN 1
1
USB2_3
HDLED RESET
PLED PW RBTN
PANEL1
1
1
SPEAKE R1
COM2
1
CI1
1
SATA3_2
CMO S
Bat te ry
Ro HS
1
HD_AU DIO1
BIOS ROM
Fr on t USB 3.0
LAN
CLRMOS 1
1
USB3_ 1_2
SATA3_1
Top: RJ- 45
USB 3 .0 T: U SB 3 B: US B4
Top:
LINE IN
Cent er:
FRON T
Bott om:
MIC I N
1
USB4_5
USB 2.0 T: US B0 B: USB1
HDMI1
PARAL LEL PORT
COM1
VGA1
English
5
No. Description
1 CPU Fan Connector (CPU_FAN1)
2 2 x 204-pin DDR3 SO-DIMM Slots (DDR3_A1, DDR3_B1)
3 ATX Power Connector (ATXPWR1)
4 USB 3.0 Header (USB3_1_2)
5 USB 2.0 Header (USB2_3)
6 USB 2.0 Header (USB4_5)
7 Chassis Fan Connector (CHA_FAN1)
8 SATA3 Connector (SATA3_1)
9 System Panel Header (PANEL1)
10 SATA3 Connector (SATA3_2)
11 Chassis Speaker Header (SPEAKER1)
12 TPM Header (TPMS1)
13 Chassis Intrusion Header (CI1)
14 COM Port Header (COM2)
15 Clear CMOS Jumper (CLRMOS1)
16 Front Panel Audio Header (HD_AUDIO1)
J3160B-ITX J3060B-ITX
English
6

1.4 I/O Panel

1 3 5
2
4
English
11 10
No. Description No. Description
1 PS/2 Mouse Port 7 USB 3.0 Ports (USB3_34)
2 Parallel Port 8 USB 2.0 Ports (USB_01)
3 LAN RJ-45 Port* 9 HDMI Port
4 Line In (Light Blue)** 10 D-Sub Port
5 Front Speaker (Lime)** 11 COM Port
6 Microphone (Pink)** 12 PS/2 Keyboard Port
* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK L ED
SPEED LE D
LAN Por t
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection Blinking Data Activity Orange 100Mbps connection On Link Green 1Gbps connection
678912
7
J3160B-ITX J3060B-ITX
** To congure 7.1 CH HD Audio, it i s required to use an HD front panel audio module and enable the multi­channel audio feature through the audio driver.
Please set Speaker Conguration to “7.1 Speaker”in the Realtek HD Audio Manager.
Function of the Audio Por ts in 7.1-channel Con guration:
Port Function
Light Blue (Rear panel) Rear Speaker Out Lime (Rear panel) Front Speaker Out Pink (Rear panel) Central /Subwoofer Speaker Out Lime (Front panel) Side Speaker Out
English
8

Chapter 2 Installation

is is a Mini-ITX form factor motherboard. Before you install the motherboard,
study the conguration of your chassis to ensure that the motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard.
•
Failure to do so may cause physical injuries to you and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboard’s components,
•
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
•
Whenever you uninstall any components, place them on a grounded anti-static pad or
•
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-
•
tighten the screws! Doing so may damage the motherboard.
English
9

2.1 Installing Memory Modules (SO-DIMM)

is motherboard provides two 204-pin DDR3/DDR3L (Double Data Rate 3) SO-
DIMM slots. If only one SO-DIMM module is installed, please install it into DDR3_
A1.
It is not allowed to install a DDR or DDR2 memory module into a DDR3/DDR3L slot; otherwise, this motherboard and SO-DIMM may be d amaged.
e SO-DIMM only ts in one cor rect orientation. It w ill cau se permanent damage to the motherboard and the SO -DIMM if you force the SO-DIM M into the slot at incorrect orientation.
J3160B-ITX J3060B-ITX
10
English
1
2
English
11
3

2.2 Expansion Slots (PCI Express Slot)

ere is 1 PCI Express slot on the motherboard.
Before installing an ex pansion card, please make sure that the power supply is switched o or the power cord is unplugged. Plea se read the documentation of the expan sion card and mak e necessary hardware settings for the card before you start the installation.
PCIe slot:
PCIE1 (PCIe 2.0 x1 slot) is used for PCI Express cards with x1 lane width cards.
J3160B-ITX J3060B-ITX
12
English
Loading...
+ 38 hidden pages