Asrock H61 Pro BTC User Manual

H61 Pro BTC

User Manual

Version 1.0

Published September 2013

Copyright©2013 ASRock INC. All rights reserved.

1

Copyright Notice:

No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be regis­tered trademarks or copyrights of their respective companies, and are used only for

identication or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this manual are furnished for informa­tional use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warran-

ties or conditions of merchantability or tness for a particular purpose.
In no event shall ASRock, its directors, ofcers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from
any defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol­lowing two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in Cali­fornia, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate”

The terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

2

Contents

1 Introduction ........................................................ 5

1.1 Package Contents ......................................................... 5

1.2 Specications ................................................................. 6

1.3 Unique Features ............................................................ 10

1.4 Motherboard Layout ....................................................... 14

1.5 I/O Panel ...................................................................... 15

2 Installation .......................................................... 16

2.1 Screw Holes ................................................................... 16

2.2 Pre-installation Precautions ......................................... 16

2.3 CPU Installation ............................................................. 17

2.4 Installation of Heatsink and CPU fan ............................. 19

2.5 Installation of Memory Modules (DIMM) ........................ 20

2.6 Expansion Slots

2.7 Dual Monitor and Surround Display Features ................ 22

2.8 Jumpers Setup .......................................................... 25

2.9 Onboard Headers and Connectors ............................ 26

2.10 Driver Installation Guide ............................................ 30

3 UEFI SETUP UTILITY .......................................... 31

3.1 Introduction .................................................................... 31

3.1.1 UEFI Menu Bar .................................................... 31

3.1.2 Navigation Keys ................................................... 32

3.2 Main Screen ................................................................... 33

3.3 OC Tweaker Screen ...................................................... 34

3.4 Advanced Screen ........................................................... 38

3.4.1 CPU Conguration ............................................... 39

3.4.2 North Bridge Conguration................................... 41

3.4.3 South Bridge Conguration .................................. 42

3.4.4 Storage Conguration .......................................... 43

3.4.5 Intel(R) Rapid Start Technology ........................... 44

3.4.6 Intel(R) Smart Connect Technology ..................... 45

3.4.7 Super IO Conguration ........................................ 46

3.4.8 ACPI Conguration............................................... 47

3.4.9 USB Conguration ............................................... 48

3.4.10 Network Conguration......................................... 49

3.5 Hardware Health Event Monitoring Screen ................... 50

3.6 Boot Screen ................................................................... 51

3.7 Security Screen ............................................................. 53

3.8 Exit Screen .................................................................... 54

(PCI Express Slots)

................................. 21

3

4 Software Support ............................................... 55

4.1 Install Operating System ................................................ 55

4.2 Support CD Information ................................................. 55

4.2.1 Running Support CD ............................................ 55

4.2.2 Drivers Menu ........................................................ 55

4.2.3 Utilities Menu........................................................ 55

4.2.4 Contact Information .............................................. 55

4

Chapter 1: Introduction

Thank you for purchasing ASRock H61 Pro BTC motherboard, a reliable mother-

board produced under ASRock’s consistently stringent quality control. It delivers

excellent performance with robust design conforming to ASRock’s commitment to

quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contain the conguration

guide to BIOS setup and information of the Support CD.

Because the motherboard specications and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modications of this manual occur, the updated version

will be available on ASRock website without further notice. You may nd

the latest VGA cards and CPU support lists on ASRock website as well.

ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock H61 Pro BTC Motherboard (ATX Form Factor)

ASRock H61 Pro BTC Quick Installation Guide

ASRock H61 Pro BTC Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

ASRock Reminds You...

To get better performance in Windows® 8 / 8 64-bit / 7 / 7 64-bit / Vista

VistaTM 64-bit, it is recommended to set the BIOS option in Storage Con-

guration to AHCI mode.

TM

5

/

1.2 Specications

Platform - ATX Form Factor

- All Solid Capacitor design

CPU - Supports 3rd and 2nd generation Intel® CoreTM i7 / i5 / i3 /

Xeon® / Pentium® / Celeron® in LGA1155 package

- Supports Intel® Turbo Boost 2.0 Technology

- Supports K-Series unlocked CPUs

Chipset - Intel® H61

- Supports Intel® Rapid Start Technology and Smart Connect

Technology

Memory - Dual Channel DDR3 Memory Technology

- 2 x DDR3 DIMM Slots

- Supports DDR3 1600/1333/1066 non-ECC, un-buffered

memory (DDR3 1600 with Intel® Ivy Bridge CPU, DDR3

1333 with Intel® Sandy Bridge CPU)

- Max. capacity of system memory: 16GB (see CAUTION 1)

- Supports Intel® Extreme Memory Prole (XMP) 1.3 / 1.2 with

Intel® Ivy Bridge CPU

Expansion Slot - 1 x PCI Express 3.0 x16 Slot (PCIE2 @ x16 mode)

* PCIE 3.0 is only supported with Intel® Ivy Bridge CPU. With

Intel® Sandy Bridge CPU, it only supports PCIE 2.0.

- 5 x PCI Express 2.0 x1 Slots

Graphics * Intel® HD Graphics Built-in Visuals and the VGA outputs

can be supported only with processors which are GPU

integrated.

- Supports Intel® HD Graphics Built-in Visuals: Intel® Quick

Sync Video 2.0, Intel® InTruTM 3D, Intel® Clear Video HD

Technology, Intel® InsiderTM, Intel® HD Graphics 2500/4000

with Intel® Ivy Bridge CPU

- Supports Intel® HD Graphics Built-in Visuals: Intel® Quick

Sync Video, Intel® InTruTM 3D, Intel® Clear Video HD

Technology, Intel® HD Graphics 2000/3000, Intel® Advanced

Vector Extensions (AVX) with Intel® Sandy Bridge CPU

- Pixel Shader 5.0, DirectX 11 with Intel® Ivy Bridge CPU.

Pixel Shader 4.1, DirectX 10.1 with Intel® Sandy Bridge

CPU.

- Max. shared memory 1760MB with Intel® Ivy Bridge CPU.

Max. shared memory 1759MB with Intel® Sandy Bridge

CPU.

6

- Dual VGA Output: support HDMI and D-Sub ports by

independent display controllers

- Supports HDMI Technology with max. resolution up to

1920x1200 @ 60Hz

- Supports D-Sub with max. resolution up to 2048x1536 @

75Hz

- Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI Port (Compliant HDMI

monitor is required) (see CAUTION 2)

- Supports HDCP with HDMI Port

- Supports Full HD 1080p Blu-ray (BD) playback with HDMI

Port

Audio - 5.1 CH HD Audio (VIA® VT1705 Audio Codec)

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111E

- Supports Wake-On-LAN

- Supports LAN Cable Detection

- Supports Energy Efcient Ethernet 802.3az

- Supports PXE

Rear Panel I/O - 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x D-Sub Port

- 1 x HDMI Port

- 6 x USB 2.0 Ports

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

- HD Audio Jacks: Line in/Front Speaker/Microphone

Storage - 4 x SATA2 3.0 Gb/s Connectors, support NCQ, AHCI and

Hot Plug

Connector - 1 x IR Header

- 1 x COM Port Header

- 1 x CPU Fan Connector (4-pin)

- 1 x Chassis Fan Connector (4-pin)

- 1 x Power Fan Connector (4-pin)

- 1 x 24 pin ATX Power Connector

- 1 x 8 pin 12V Power Connector

- 2 x SLI/XFire Power Connectors

- 1 x Front Panel Audio Connector

- 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)

BIOS Feature - 32Mb AMI UEFI Legal BIOS with GUI support

- Supports “Plug and Play”

7

- ACPI 1.1 Compliant wake up events

- Supports jumperfree

- SMBIOS 2.3.1 support

- IGPU, DRAM, PCH, CPU PLL, VTT, VCCSA Voltage

multi-adjustment

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version), Google

Chrome Browser and Toolbar

Hardware - CPU temperature sensing

Monitor - Chassis temperature sensing

- CPU/Chassis/Power Fan Tachometer

- CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

CPU temperature)

- CPU/Chassis Fan multi-speed control

- Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

OS - Microsoft® Windows® 8 / 8 64-bit / 7 / 7 64-bit / Vista

TM

/

VistaTM 64-bit / XP / XP 64-bit compliant

Certications - FCC, CE, WHQL

- ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking,

including adjusting the setting in the BIOS, applying Untied Overclocking

Technology, or using third-party overclocking tools. Overclocking may

affect your system’s stability, or even cause damage to the components

and devices of your system. It should be done at your own risk and

expense. We are not responsible for possible damage caused by

overclocking.

8

CAUTION!

1. Due to the operating system limitation, the actual memory size

may be less than 4GB for the reservation for system usage

under Windows® 8 / 7 / VistaTM / XP. For Windows® OS with 64-

bit CPU, there is no such limitation. You can use ASRock XFast

RAM to utilize the memory that Windows® cannot use.

2. xvYCC and Deep Color are only supported under Windows® 8

64-bit / 8 / 7 64-bit / 7. Deep Color mode will be enabled only

if the display supports 12bpc in EDID. HBR is supported under

Windows® 8 64-bit / 8 / 7 64-bit / 7 / VistaTM 64-bit / VistaTM.

9

1.3 Unique Features

ASRock Extreme Tuning Utility (AXTU)

ASRock Extreme Tuning Utility (AXTU) is an all-in-one tool to

ne-tune different system functions in a user-friendly interface,

which includes Hardware Monitor, Fan Control, Overclocking,

OC DNA, IES and XFast RAM. In Hardware Monitor, it shows

the major readings of your system. In Fan Control, it shows the

fan speed and temperature for you to adjust. In Overclocking,

you are allowed to overclock CPU frequency for optimal system

performance. In OC DNA, you can save your OC settings as

a prole and share it with your friends. Your friends then can

load the OC prole to their own system to get the same OC set-

tings. In IES (Intelligent Energy Saver), the voltage regulator

can reduce the number of output phases to improve efciency

when the CPU cores are idle without sacricing computing per-

formance. In XFast RAM, it fully utilizes the memory space that

cannot be used under Windows® OS 32-bit CPU.

ASRock Instant Boot

ASRock Instant Boot allows you to turn on your PC in just a few

seconds, provides a much more efcient way to save energy,

time, money, and improves system running speed for your sys-

tem. It leverages the S3 and S4 ACPI features which normally

enable the Sleep/Standby and Hibernation modes in Windows®

to shorten boot up time. By calling S3 and S4 at specic timing

during the shutdown and startup process, Instant Boot allows

you to enter your Windows® desktop in a few seconds.

ASRock Instant Flash

ASRock Instant Flash is a BIOS ash utility embedded in Flash

ROM. This convenient BIOS update tool allows you to update

system BIOS without entering operating systems rst like MS-

DOS or Windows®. With this utility, you can press the <F6> key

during the POST or the <F2> key to enter into the BIOS setup

menu to access ASRock Instant Flash. Just launch this tool and

save the new BIOS le to your USB ash drive, oppy disk or

hard drive, then you can update your BIOS only in a few clicks

without preparing an additional oppy diskette or other compli-

cated ash utility. Please be noted that the USB ash drive or

hard drive must use FAT32/16/12 le system.

10

ASRock APP Charger

If you desire a faster, less restricted way of c ha rg in g your

Apple devices, such as iPhone/iPad/iPod Touch, ASRock has

prepared a wonderful solution for you - ASRock APP Charger.

Simply install the APP Charger driver, it makes your iPhone

charge much quickly from your computer and up to 40% faster

than before. ASRock APP Charger allows you to quickly charge

many Apple devices simultaneously and even supports continu-

ous charging when your PC enters into Standby mode (S1),

Suspend to RAM (S3), hibernation mode (S4) or power off (S5).

With APP Charger driver installed, you can easily enjoy the mar-

velous charging experience.

ASRock XFast USB

ASR ock XFast USB can boost USB storage device perfor-

mance. The performance may depend on the properties of the

device.

ASRock XFast LAN

ASRock XFast LAN provides a faster internet access, which

includes the benefits listed below. LAN Application Prioritiza-

tion: You can congure your application’s priority ideally and/or

add new programs. Lower Latency in Game: After setting online

game’s priority higher, it can lower the latency in games. Trafc

Shaping: You can watch Youtube HD videos and download si-

multaneously. Real-Time Analysis of Your Data: With the status

window, you can easily recognize which data streams you are

transferring currently.

ASRock XFast RAM

ASRock XFast RAM is a new function that is included into AS-

Rock Extreme Tuning Utility (AXTU). It fully utilizes the memory

space that cannot be used under Windows® OS 32-bit CPU.

ASRock XFast RAM shortens the loading time of previously

visited websites, making web surfing faster than ever. And it

also boosts the speed of Adobe Photoshop 5 times faster. An-

other advantage of ASRock XFast RAM is that it reduces the

frequency of accessing your SSDs or HDDs in order to extend

their lifespan.

11

ASRock Crashless BIOS

ASRock Crashless BIOS allows users to update their BIOS

without fear of failing. If power loss occurs during the BIOS up-

date process, ASRock Crashless BIOS will automatically nish

the BIOS update procedure after regaining power. Please note

that BIOS les need to be placed in the root directory of your

USB disk. Only USB2.0 ports support this feature.

ASRock OMG (Online Management Guard)

Administrators are able to establish an internet curfew or restrict

internet access at specied times via OMG. You may schedule

the starting and ending hours of internet access granted to other

users. In order to prevent users from bypassing OMG, guest

accounts without permission to modify the system time are re-

quired.

ASRock Internet Flash

ASRock Internet Flash searches for available UEFI firmware

updates from our servers. In other words, the system can auto-

detect the latest UEFI from our servers and ash them without

entering Windows® OS. Please note that you must be running

on a DHCP congured computer in order to enable this function.

ASRock Dehumidier Function

Users may prevent motherboard damages due to dampness by

enabling “Dehumidier Function”. When enabling Dehumidier

Function, the computer will power on automatically to dehumidi-

fy the system after entering S4/S5 state.

ASRock Fast Boot

With ASRock’s exclusive Fast Boot technology, it takes less

than 1.5 seconds to logon to Windows® 8 from a cold boot. No

more waiting! The speedy boot will completely change your user

experience and behavior.

12

ASRock Restart to UEFI

Windows® 8 brings the ultimate boot up experience. The light-

ning boot up speed makes it hard to access the UEFI setup. AS-

Rock Restart to UEFI technology is designed for those requiring

frequent UEFI access. It allows users to easily enter the UEFI

automatically when turning on the PC next time. Just simply

enable this function; the PC will be assured to access the UEFI

directly in the very beginning.

ASRock Combo Cooler Option (C.C.O.)

Combo Cooler Option (C.C.O.) provides the exible option to

adopt three different CPU cooler types, Socket LGA 775, LGA

1155 and LGA 1156. Please be noticed that not all the 775 and

1156 CPU Fan can be used.

ASRock Good Night LED

ASRock Good Night LED technology can offer you a better en-

vironment by extinguishing the unessential LED. By enabling

Good Night LED in BIOS, the Power / HDD / LAN LED will be

switched off when system is on. Not only this, Good night LED

will automatically switch off Power and Keyboard LED when the

system enters into Standby / Hibernation mode as well.

13

1.3 Motherboard Layout

ATXP WR1

Inte l

H61

CMOS

Batt ery

32Mb
BIOS

DDR3 _A1 (64 bit , 24 0-pi n mo dul e)

DDR3 _B1 (64 bit , 24 0-pi n mo dul e)

Super

I/O

LAN
PHY

AUDIO

CODEC

1

HD_AUDIO 1

COM1

1

USB6_7

1

USB8_9

1

1

SPEAKER1

HDLED RESET

PLED PWRBTN

PANEL1

1

CLRCMOS1

1

SATA2_1

SATA2_3

SATA2_0

SATA2_2

PCI E2

PCI E1

PCI E3

PCI E4

PCI E5

PCI E6

RoHS

H6 1 P ro BT C

ATX12V1

IR1

1

PS2

Keybo ard

PS2

Mouse

VGA1

Top:
RJ-45

USB 2.0
T:U SB4
B: USB5

USB 2.0
T:US B0
B: USB1

Top:

LINE IN

Center:

FRONT

Bottom:

MIC IN

USB 2.0
T:US B2
B: USB3

HDMI 1

CPU_FAN1

CHA_FAN1

PWR_FAN1

1

2

3

4

5

6

7

8

9

10

11

12

14

13

15

16

17

18

1920

21

22

23

24

25

26

28

SLI/XFIRE _PWR1

X

Fast US B

X

Fast RA M

X

Fast LA N

SLI/XFIRE _PWR2

27

29

1 1155-Pin CPU Socket 15 SATA2 Connector (SATA2_1)

2 CPU Fan Connector (CPU_FAN1) 16 System Panel Header (PANEL1)

3 ATX 12V Power Connector (ATX12V1) 17 USB 2.0 Header (USB8_9)

4 2 x 240-pin DDR3 DIMM Slots 18 USB 2.0 Header (USB6_7)

(Dual Channel: DDR3_A1, DDR3_B1) 19 COM Port Header (COM1)

5 ATX Power Connector (ATXPWR1) 20 Front Panel Audio Header (HD_AUDIO1)

6 Chassis Fan Connector (CHA_FAN1) 21 PCI Express 2.0 x1 Slot (PCIE6)

7 32Mb SPI Flash 22 PCI Express 2.0 x1 Slot (PCIE5)

14

8 Intel H61 Chipset 23 PCI Express 2.0 x1 Slot (PCIE4)

9 Clear CMOS Jumper (CLRCMOS1) 24 PCI Express 2.0 x1 Slot (PCIE3)

10 Chassis Speaker Header (SPEAKER1) 25 PCI Express 3.0 x16 Slot (PCIE2)

11 SATA2 Connector (SATA2_2) 26 PCI Express 2.0 x1 Slot (PCIE1)

12 SATA2 Connector (SATA2_0) 27 SLI/XFire Power Connector (SLI/XFIRE_PWR2)

13 Infrared Module Header (IR1) 28 Power Fan Connector (PWR_FAN1)

14 SATA2 Connector (SATA2_3) 29 SLI/XFire Power Connector (SLI/XFIRE_PWR1)

1.4 I/O Panel

1

2

3

4

5

11

1 PS/2 Mouse Port (Green) 7 USB 2.0 Ports (USB23)

* 2 LAN RJ-45 Port 8 USB 2.0 Ports (USB01)

3 Line In (Light Blue) 9 HDMI Port

** 4 Front Speaker (Lime) 10 D-Sub Port

5 Microphone (Pink) 11 PS/2 Keyboard Port (Purple)

6 USB 2.0 Ports (USB45)

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

Activity/Link LED SPEED LED

Status Description Status Description

10

LAN Port LED Indications

9

8

7

6

ACT/LINK

LED

SPEED

LED

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

LAN Port

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will nd “VIA HD Audio Deck” tool on

your system. Please follow below instructions according to the OS you install.

For Windows® XP / XP 64-bit OS:

Please click “VIA HD Audio Deck” icon , and click “Speaker”. Then you are allowed to

select “2 Channel” or “4 Channel”. Click “Power” to save your change.

For Windows® 8 / 8 64-bit / 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS:

Please click “VIA HD Audio Deck” icon , and click “Advanced Options” on the left side

on the bottom. In “Advanced Options” screen, select “Independent Headphone”, and click

“OK” to save your change.

15

Chapter 2: Installation

This is an ATX form factor motherboard. Before you install the motherboard, study

the conguration of your chassis to ensure that the motherboard ts into it.

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

Make sure to unplug the power cord before installing or removing the

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the

chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also

remember to use a grounded wrist strap or touch a safety grounded object

before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

16

2.3 CPU Installation

For the installation of Intel 1155-Pin CPU,

please follow the steps below.

Before you insert the 1155-Pin CPU into the socket, please check if the

CPU surface is unclean or if there is any bent pin on the socket. Do not

force to insert the CPU into the socket if above situation is found. Other-

wise, the CPU will be seriously damaged.

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear

retention tab.

Step 1-2. Rotate the load lever to fully open po-

sition at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open po-

sition at approximately 100 degrees.

1155-Pin Socket Overview

Step 2. Remove PnP Cap:

Step 2-1. Attach your index nger to the upper

edge of the PnP Cap.

Step 2-2. Use your thumb to remove PnP Cap

(Pick and Place Cap) from the CPU

socket by lifting the cap tab.

1. It is recommended to use the cap tab to handle and avoid kicking

off the PnP cap.

2. This cap must be placed if returning the motherboard for after

service.

17

B

A