Asrock H410TM-ITX User Manual

Version 1.0

Published May 2020

is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/
perchlorate”

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 8

Chapter 2 Installation 9

2.1 Installing the CPU 10

2.2 Installing the CPU Fan and Heatsink 13

2.3 Installing Memory Modules (SO-DIMM) 14

2.4 Jumpers Setup 15

2.5 Onboard Headers and Connectors 17

2.6 M.2 WiFi/BT Module Installation Guide 21

2.7 M.2_SSD (NGFF) Module Installation Guide 23

Chapter 3 Software and Utilities Operation 28

3.1 Installing Drivers 28

Chapter 4 UEFI SETUP UTILITY 29

4.1 Introduction 29

4.2 EZ Mode 30

4.3 Advanced Mode 31

4.3.1 UEFI Menu Bar 31

4.3.2 Navigation Keys 32

4.4 Main Screen 33

4.5 OC Tweaker Screen 34

4.6 Advanced Screen 42

4.6.1 CPU Conguration 43

4.6.2 Chipset Conguration 45

4.6.3 Storage Conguration 47

4.6.4 Super IO Conguration 48

4.6.5 ACPI Conguration 49

4.6.6 USB Conguration 50

4.6.7 Trusted Computing 51

4.7 Tools 53

4.8 Hardware Health Event Monitoring Screen 55

4.9 Security Screen 57

4.10 Boot Screen 58

4.11 Exit Screen 60

Chapter 1 Introduction

ank you for purchasing H410TM-ITX motherboard. In this documentation,

Chapter 1 and 2 contains the introduction of the motherboard and step-by-step

installation guides. Chapter 3 contains the operation guide of the soware and

utilities. Chapter 4 contains the conguration guide of the BIOS setup.

Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice.

1.1 Package Contents

H410TM-ITX Motherboard (in Mini-ITX Form Factor)

•

H410TM-ITX Quick Installation Guide (Optional)

•

1 x in-Mini ITX I/O Shield (Optional)

•

1 x Mini ITX I/O Shield (Optional)

•

1 x Serial ATA (SATA) Data Cable (Optional)

•

1 x SATA Power Cable (Optional)

•

2 x Screws for M.2 Sockets (M2*2) (Optional)

•

H410TM-ITX

English

1

1.2 Specications

Platform

CPU

Chipset

Memory

•

•

•

•

•

•

•

•

•

* Please refer to Memory Support List on ASRock’s website for

more information. (http://www.asrock.com/)

•

•

•

in Mini-ITX Form Factor

Solid Capacitor design

Suppor ts 10th Gen Intel® CoreTM Processors (Socket 1200)

4 Power Phase design

Supports Intel® Turbo Boost Ma x 3.0 Technology

Intel® H410

Dual Channel DDR4 Memory Technology

2 x DDR4 SO-DIMM Slots

Supports DDR4 2933/2800/2666/2400/2133 non-ECC, un-

buered memory

CoreTM (i9/i7) support DDR4 up to 2933; CoreTM (i5/i3),

Pentium® and Celeron® support DDR4 up to 2666.

Max. capacity of system memory: 64GB

Supports Intel® Extreme Memory Prole (XMP) 2.0

English

2

Expansion
Slot

Graphics

1 x M.2 Socket (Key E), supports ty pe 2230 WiFi/BT module

•

Intel® UHD Graphics Built-in Visuals and the VGA outputs

•

can be supported only with processors which are GPU

integrated.

Hardware Accelerated Codecs: AVC/H.264, HEVC/H.265

•

8bit, HEVC/H.265 10bit, VP8, VP9 8bit, VP9 10bit, MPEG 2,

MJ PEG, VC-1

* VP9 10bit and VC-1 are for decode only.

* VP8 and VP9 encode are not supported by Windows OS.

Audio

Graphics, Media & Compute: Microso DirectX 12, OpenGL

•

4.5, Intel® Built In Visuals, Intel® Quick Sync Video, Hybrid /

Switchable Graphics, OpenCL 2.1

Display & Content Security: Rec. 2020 (Wide Color Gamut),

•

Microso PlayReady 3.0, Intel® SGX Content Protection,

UHD/HDR Blu-ray Disc

ree graphics output options: 2 x HDMI, 1 x LVDS ports

•

Supports 2 x HDMI 1.4 with max. resolution up to 4K x 2K

•

(4096x2160) @ 30Hz

HDMI x 1 port (Rear)

HDMI x 1 port (Internal)

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and HBR

•

(High Bit Rate Audio) with HDMI 1.4 Port (Compliant HDMI

monitor is required)

Supports LVDS with max. resolution up to 1920x1080 @ 60Hz

•

Supports HDCP 2.3 with HDMI 1.4 Port

•

Supports 4K Ultra HD (UHD) playback with HDMI 1.4 Port

•

Realtek ALC233 Audio Codec

•

1 x Line out

•

1 x MIC-In

•

H410TM-ITX

LAN

I/O

PCIE x1 Gigabit LAN 10/100/1000 Mb/s

•

Realtek RTL8111H

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

•

1 x DC Jack (Compatible with the 19V power adapter)

•

1 x Serial Port: COM

•

2 x HDMI Ports: HDMI1 (Rear), HDMI2 (Internal)

•

4 x USB 3.2 Gen1 Ports (Supports ESD Protection)

•

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

•

LED)

HD Audio Jacks: Line out / Microphone

•

English

3

Storage

Connector

2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot

•

Plug

1 x Ultra M.2 Socket, supports M Key type 2260/2280 M.2

•

SATA3 6.0 Gb/s module and M.2 PCI Express module up to

Gen3 x4 (32 Gb/s)

* Supports NVMe SSD as boot disks

1 x Chassis Intrusion Header

•

1 x Panel Voltage Selection Header

•

1 x Backlight Inverter Voltage Selection Header

•

1 x FPD Brightness Header

•

1 x Panel O Header

•

1 x LVDS Connector

•

2 x CPU Fan Connectors (4-pin)

•

* e CPU Fan Connectors support the CPU fan of maximum 1A

(12W) fan power.

1 x 4 pin 19V Power Connector

•

1 x ermal Sensor Header (2-Pin)

•

1 x Front Panel Audio Connector

•

1 x Internal Speaker Header (4-Pin)

•

2 x SATA Power Connectors

•

2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD

•

Protection)

English

4

BIOS
Feature

Hardware
Monitor

OS

Power

AMI UEFI Legal BIOS with GUI support

•

ACPI 6.0 Compliant wake up events

•

SMBIOS 2.7 Support

•

CPU Temperature Sensing

•

CPU Fan Tachometer

•

CPU Quiet Fan (Auto adjust chassis fan speed by CPU

•

temperature)

CPU Fan Multi-Speed Control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

•

Microso® Windows® 10 64-bit

•

1 x DC Jack (Supports 19V DC Power Adapters)

•

FCC, CE

Certica­tions

Please realiz e that the re is a certain r isk involved with o verclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technolog y, or using third-party
overclocking to ols. O verclocking may aect your system’s stability, or even c ause damage to
the components and devices of your system. It should be don e at your ow n risk and expense.
We are not responsibl e for possible damage caused by overclo cking.

•

ErP/EuP ready (ErP/EuP ready power supply is required)

•

H410TM-ITX

English

5

1.3 Motherboard Layout

14

Audio

CODEC

HDLED RESET

PLED PWRBTN

PANEL1

1

COM1

17

DC Jack

HDMI 1

HDMI2

Supe r

I/O

BIOS
ROM

M.2 WiFi

M.2 SSD

CPU_FAN2

CPU_FAN1

9

H410TM-ITX

RoHS

19

18

DDR4_A2

DDR4_A1

SATA_1

3 6

1

USB2_1_2

7

LVDS1

BKT_PWR1

1

BLT_VOL1

1

15

1

13

SPK_OUT1

1

USB 3.2 Gen1
T: USB3_3
B: USB3_4

USB 3.2 Gen1
T: USB3_1
B: USB3_2

RJ-45

Headphone

Mic In

ATX_PWR1

1

HD_AUDIO1

20

10

8

SATA_2

USB2_3_4

1

SATAPWR2

1

1

CLR_MOS1

TH1

2

4

5

PNL_PWR1

1

11

Intel

H410

1

SATAPWR1

21

M2_1_CT2

M2_1_CT1

MH1

1

CI1

16

12

PNL_SW1

1

English

6

No. Description

1 4 pin 19V Power Connector (ATX_PWR1)

2 SATA Power Connector (SATAPWR2)

3 SATA3 Connector (SATA_1)

4 SATA Power Connector (SATAPWR1)

5 Clear CMOS Jumper (CLRCMOS1)

6 SATA3 Connector (SATA_2)

7 USB 2.0 Header (USB2_1_2)

8 USB 2.0 Header (USB2_3_4)

9 FPD Brightness Header (BLT_VOL1)

10 Panel Voltage Selection Header (PNL _PWR1)

11 Backlight Inverter Voltage Selection Header (BKT_PWR1)

12 Panel O Header (PNL_SW1)

13 LVDS Connector (LVDS1)

14 2 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_A2)

15 CPU Fan Connector (CPU_FAN1)

16 Chassis Intrusion Header (CI1)

17 CPU Fan Connector (CPU_FAN2)

18 System Panel Header (PANEL1)

19 Internal Speaker Header (SPK_OUT1)

20 Front Panel Audio Header (HD_AUDIO1)

21 ermal Sensor Header (TH1)

H410TM-ITX

English

7

1.4 I/O Panel

No. Description No. Description

1 DC Jack** 5 LAN RJ-45 Port*

2 HDMI Port (HDMI1) 6 USB 3.2 Gen1 Port (USB3_12)

3 COM Port 7 Microphone (Pink)

4 USB 3.2 Gen1 Port (USB3_34) 8 Line out (Lime)

*ere are two LEDs on each LAN port. Plea se refer to the table below for the LA N port LED indic ations.

ACT/LINK LED

SPEED LED

LAN Por t

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection
Blinking Data Activity Green 100Mbps connection
On Link Green 1Gbps connection

872 5431 6

English

8

** Please use a 19V power adapte r for the DC jack. is jack accepts dual barrel plugs with an inner diamete r of 2.5
mm and an outer diameter of 5. 5 mm, where the inner contact is +19 (±10%) DC and the shell is (centre pos itive).

DELTA DELTA-ADP-150TB-150W/19V

HP HP-TBC-BA52-150W/19V

FSP FSP-FSP150-ABAN1-150W/19V

DELL FA130PE1- 00-130W/19.5V

DELL LA90PE0-01-90W/19.5V

DELTA DELTA-AD P-180TB -180W/19V

FSP FSP-FSP18 0-ABB N3-180W/19V

is motherboard is available with support for either 4-pin ATX 19V power or DC-in power supplies. Please do
not use two kinds of power supplie s at the same time! Doing so may damage the motherboard component s and
devices. When you u se the DC-in power adapter, please use the onboard SATA power connector to get the powe r
for HDDs.

Chapter 2 Installation

is is a in Mini-ITX form factor motherboard. Before you install the

motherboard, study the conguration of your chassis to ensure that the

motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

Make sure to unplug the power cord before installing or removing the motherboard.

•

Failure to do so may cause physical injuries to you and damages to motherboard

components.

In order to avoid damage from static electricity to the motherboard’s components,

•

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

•

in the bag that comes with the components.

When placing screws to secure the motherboard to the chassis, please do not over-

•

tighten the screws! Doing so may damage the motherboard.

H410TM-ITX

English

9

2.1 Installing the CPU

1

1. Before you insert the 1200-Pin CPU into the socke t, please check if the Pn P cap is on the
socket, if the CPU surface is unclean, or if there are any bent pins in the sock et. Do not
force to in sert the CPU into the socket if above situation is found . Otherwise, the CPU
will be seriously damaged.

2. Unplug all power c ables before in stalling the CPU.

English

A

B

2

10

H410TM-ITX

3

5

4

11

English

Please save and replace the cover if the processor i s removed. e cover must be placed if
you wish to return the motherboard for aer service.

English

12

2.2 Installing the CPU Fan and Heatsink

1 2

H410TM-ITX

CPU_FAN

English

13

1

2.3 Installing Memory Modules (SO-DIMM)

is motherboard provides two 260-pin DDR4 (Double Data Rate 4) SO-DIMM

slots.

It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;
otherwise , this motherboard and SO-DIMM may be damaged.

e SO-DIMM only ts in one cor rect orientation. It w ill cause per manent damage
to the motherboard and the DIM M if you force the DIMM into the slot at incorrect
orientation.

English

14

2

2.4 Jumpers Setup

e illustration shows how jumpers are setup. When the jumper cap is placed on

the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is

“O pen”.

Clear CMOS Jumper

(CLRCMO S1)

(see p.6, No. 5)

CLRMOS1 allows you to clear the data in CMOS. To clear and reset the system

parameters to default setup, please turn o the computer and unplug the power

cord from the power supply. Aer waiting for 15 seconds, use a jumper cap to

short the pins on CLR MOS1 for 5 seconds. However, please do not clear the

CMOS right aer you update the BIOS. If you need to clear the CMOS when you

just nish updating the BIOS, you must boot up the system rst, and then shut it

down before you do the clear-CMOS action. Please be noted that the password,

date, time, and user default prole will be cleared only if the CMOS battery is

removed. Please remember toremove the jumper cap aer clearing the CMOS.

2-pin Jumper

H410TM-ITX

If you clear the CMOS, the case open may be detected. Pl ease adjust the BIOS option
“Clear Status” to clear the record of previou s chassis int rusion status.

English

15

Backlight Inverter Voltage

Selection Header

(3-pin BKT_PWR1)

(see p.6, No. 11)

1-2 : +19V

2-3 : +12V

Panel Voltage Selection

Header

(3-pin PNL_PWR1)

(see p.6, No. 10)

War nin g:

If selected Back light Power or Panel Power is higher than panel's spec, it

may damage the panel.

1-2 : +3V

2-3 : +5V

English

16