Asrock H110M-ITX/D3 User Manual

Version 1.0

Published June 2015

Copyright©2015 ASRock INC. All rights reser ved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.

Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 8

Chapter 2 Installation 10

2.1 Installing the CPU 11

2.2 Installing the CPU Fan and Heatsink 14

2.3 Installing Memory Modules (DIMM) 15

2.4 Expansion Slots (PCI Express Slots) 17

2.5 Jumpers Setup 18

2.6 Onboard Headers and Connectors 19

Chapter 3 Software and Utilities Operation 23

3.1 Installing Drivers 23

3.2 ASRock Live Update & APP Shop 24

3.2.1 UI Overview 24

3.2.2 Apps 25

3.2.3 BIOS & Drivers 28

3.2.4 Setting 29

3.3 Enabling USB Ports for Windows® 7 Installation 30

Chapter 4 UEFI SETUP UTILITY 33

4.1 Introduction 33

4.1.1 UEFI Menu Bar 33

4.1.2 Navigation Keys 34

4.2 Main Screen 35

4.3 OC Tweaker Screen 36

4.4 Advanced Screen 45

4.4.1 CPU Conguration 46

4.4.2 Chipset Conguration 48

4.4.3 Storage Conguration 50

4.4.4 Super IO Conguration 51

4.4.5 ACPI Conguration 52

4.4.6 USB Conguration 53

4.4.7 Trusted Computing 54

4.5 Tools 55

4.6 Hardware Health Event Monitoring Screen 59

4.7 Security Screen 61

4.8 Boot Screen 62

4.9 Exit Screen 65

Chapter 1 Introduction

ank you for purchasing ASRock H110M-ITX/D3 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the

motherboard and step-by-step installation guides. Chapter 3 contains the operation

guide of the soware and utilities. Chapter 4 contains the conguration guide of

the BIOS setup.

Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice. In case any
modications of this documentation occur, the updated version will be available on
ASRock’s website w ithout f urther notice. If you require technical support relate d to
this motherboard, please vi sit our website for s pecic information about the model
you are using. You may nd the l atest VGA cards and CPU suppor t list on ASRock’s
website a s well. ASRock website ht tp://www.a srock.com.

1.1 Package Contents

ASRock H110M-ITX/D3 Motherboard (Mini-ITX Form Factor)

•

ASRock H110M-ITX/D3 Quick Installation Guide

•

ASRock H110M-ITX/D3 Support CD

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

1 x I/O Panel Shield

•

1 x WiFi Module Bracket

•

2 x Screws for WiFi Module

•

H110M-ITX/D3

English

1

1.2 Specications

Platform

CPU

Chipset

Memory

Expansion
Slot

•

•

•

•

•

•

•

•

•

•

•

•

•

•

* is Mini-PCI Express Slot supports WiFi modules only.

mSATA devices are not supported.

Mini-ITX Form Factor

Solid Capacitor design

High Density Glass Fabric PCB

Supports 6th Generation Intel® CoreTM i7/i5/i3/Pentium®/

Celeron® Processors (Socket 1151)

Digi Power design

Supports Intel® Turbo Boost 2.0 Technology

Intel® H110

Dual Channel DDR3/DDR3L Memory Technology

2 x DDR3/DDR3L DIMM Slots

Supports DDR3/DDR3L 1600/1333/1066 non-ECC, un-

buered memory

Max. capacity of system memory: 32GB

Supports Intel® Extreme Memory Prole (XMP) 1.3 / 1.2

1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)

1 x Vertical Half-size Mini-PCI Express Slot

English

2

Graphics

Intel® HD Graphics Built-in Visuals and the VGA outputs

•

can be supported only with processors which are GPU

integrated.

Supports Intel® HD Graphics Built-in Visuals : Intel® Quick

•

Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD

Technology, Intel® InsiderTM, Intel® HD Graphics 510/530

Pixel Shader 5.0, DirectX 12

•

Max. shared memory 1792MB

•

Dual graphics output: Support DVI-D and HDMI ports by

•

independent display controllers

Supports HDMI with max. resolution up to 4K x 2K

•

(4096x2304) @ 24Hz

Audio

LAN

Supports DVI-D with ma x. resolution up to 1920x1200 @

•

60Hz

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

•

HBR (High Bit Rate Audio) with HDMI Port (Compliant

HDMI monitor is required)

Supports Accelerated Media Codecs: HEVC, VP8, VP9

•

Supports HDCP with DVI-D and HDMI Ports

•

Supports Full HD 1080p Blu-ray (BD) playback with DVI-D

•

and HDMI Ports

7.1 CH HD Audio with Content Protection (Realtek ALC892

•

Audio Codec)

* To congure 7.1 CH HD Audio, it is required to use an HD

front panel audio module and enable the multi-channel audio

feature through the audio driver.

Premium Blu-ray Audio support

•

Supports Surge Protection (ASRock Full Spike Protection)

•

ELNA Audio Caps

•

Gigabit LAN 10/100/1000 Mb/s

•

Giga PHY Intel® I219V

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection (ASRock Full Spike

•

Protection)

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

•

H110M-ITX/D3

Rear Panel
I/O

1 x PS/2 Mouse/Keyboard Port

•

1 x DVI-D Port

•

1 x HDMI Port

•

4 x USB 2.0 Ports (Supports ESD Protection (ASRock Full

•

Spike Protection))

2 x USB 3.0 Ports (Supports ESD Protection (ASRock Full

•

Spike Protection))

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

•

LED)

HD Audio Jacks: Line in / Front Speaker / Microphone

•

English

3

Storage

Connector

BIOS
Feature

4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

•

Hot Plug

1 x TPM Header

•

1 x Chassis Intrusion Header

•

1 x CPU Fan Connector (4-pin) (Smart Fan Speed Control)

•

1 x Chassis Fan Connector (4-pin) (Smart Fan Speed Con-

•

trol)

1 x 20 pin ATX Power Connector

•

1 x 4 pin 12V Power Connector

•

1 x Front Panel Audio Connector

•

2 x USB 2.0 Headers (Support 3 USB 2.0 ports) (Supports

•

ESD Protection (ASRock Full Spike Protection))

1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports

•

ESD Protection (ASRock Full Spike Protection))

* USB3_7_8 is shared with USB_9_10.

128Mb AMI UEFI Legal BIOS with multilingual GUI sup-

•

port

ACPI 1.1 Compliant wake up events

•

SMBIOS 2.3.1 Support

•

CPU, GT_CPU, DRAM, PCH 1.0V, VCCIO, VCCSA Voltage

•

Multi-adjustment

English

4

Hardware
Monitor

OS

CPU/Chassis temperature sensing

•

CPU/Chassis Fan Tachometer

•

CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

•

CPU temperature)

CPU/Chassis Fan multi-speed control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

•

Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-

•

bit

* To install Windows® 7 OS, a modied installation disk with

xHCI drivers packed into the ISO le is required. Please refer to

page 30 for more detailed instructions.

* For the updated Windows® 10 driver, please visit ASRock ’s

website for details: http://ww w.asrock.com

FCC, CE, WHQL

Certica­tions

* For detailed product information, please visit our website: http://ww w.asrock.com

Please realize that the re is a certain r isk involved with overclo cking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technol ogy, or using
third-party overclocking tool s. Overclocking may aect your system’s stability, or
even cause dam age to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for poss ible damage caused by
overclocking.

•

ErP/EuP Ready (ErP/EuP ready power supply is required)

•

H110M-ITX/D3

English

5

1.3 Motherboard Layout

1

1

TPMS1

ATX12V1

H110M -I TX /D3

Intel

H110

DDR 3_ B1 (64 bi t, 24 0-p in mo dul e)

DDR 3_ A1 (64 bi t, 24 0-p in mo dul e)

PCIE 1

USB 2 .0

T: USB1

B: US B2

PS2

Keyb oard

/Mou se

Top:

LINE I N

Cent e r:

FRONT

Bott o m:

MIC IN

Top:
RJ- 45

USB 3 .0
T: U SB3
B: US B4

USB 2.0
T: USB 5
B: U SB6

CHA_FAN 1

ATXP WR1

USB3_7_ 8

HDLED RESET

PLED PW RBTN

PANEL1

1

SATA3_3

SATA3_2

SATA3_1

SATA3_0

128Mb

BIOS

1

CI1

1

SPEAKER1

1

HD_AUD IO1

CPU_FAN 1

USB_9_1 0

1

CMOS

Batte ry

1

USB11

MIN I_P CI E1

DVI1

English

6

HDM I1

Ro HS

CLRMOS1

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 Chassis Fan Connector (CHA_FAN1)

3 CPU Fan Connector (CPU_FAN1)

4 2 x 240-pin DDR3/DDR3L DIMM Slots (DDR3_A1, DDR3_B1)

5 ATX Power Connector (ATXPWR1)

6 USB 2.0 Header (USB_9_10)

7 USB 3.0 Header (USB3_7_8)

8 TPM Header (TPMS1)

9 System Panel Header (PANEL1)

10 Chassis Speaker Header (SPEAK ER1)

11 Clear CMOS Jumper (CLRMOS1)

12 SATA3 Connector (SATA3_0)

13 SATA3 Connector (SATA3_1)

14 SATA3 Connector (SATA3_2)

15 SATA3 Connector (SATA3_3)

16 Chassis Intrusion Header (CI1)

17 Front Panel Audio Header (HD_AUDIO1)

18 USB 2.0 Header (USB11)

H110M-ITX/D3

English

7

1.4 I/O Panel

1 2

3

4

9

No. Description No. Description

1 USB 2.0 Ports (USB12) 6 USB 2.0 Ports (USB_56)

2 LAN RJ-45 Port* 7 USB 3.0 Ports (USB3_34)

3 Line In (Light Blue)** 8 HDMI Port

4 Front Speaker (Lime)** 9 DVI-D Port

5 Microphone (Pink)** 10 PS/2 Mouse/Keyboard Port

* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK L ED

SPEED LE D

LAN Por t

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

8

6710

5

English

8

H110M-ITX/D3

** To congure 7.1 CH HD Audio, it i s required to use an HD front panel audio module and enable the multi­channel audio feature through the audio driver.

Please set Speaker Conguration to “7.1 Speaker”in the Realtek HD Audio Manager.

Function of the Audio Por ts in 7.1-channel Con guration:

Port Function

Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out

English

9

Chapter 2 Installation

is is a Mini-ITX form factor motherboard. Before you install the motherboard,

study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

Make sure to unplug the power cord before installing or removing the motherboard

•

components. Failure to do so may cause physical injuries and damages to motherboard

components.

In order to avoid damage from static electricity to the motherboard’s components,

•

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

•

in the bag that comes with the components.

When placing screws to secure the motherboard to the chassis, please do not over-

•

tighten the screws! Doing so may damage the motherboard.

English

10

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket , please check if the PnP c ap
is on the socket, if the CPU sur face is unclean, or if th ere are any b ent pins in the
socket. Do not force to insert the CPU into the socket if above situ ation is found.
Other wise, the CPU wil l be seriously d amaged.

2. Unplug all power cables be fore installing the CPU.

1

H110M-ITX/D3

A

B

2

English

11

3

4

English

12

5

Please save and replace the cover if the processor i s removed. e cover must be
placed if you wish to return the motherboard for aer service.

H110M-ITX/D3

13

English

2.2 Installing the CPU Fan and Heatsink

1 2

English

14

FAN

CPU_

2.3 Installing Memory Modules (DIMM)

is motherboard provides two 240-pin DDR3/DDR3L (Double Data Rate 3)

DIMM slots, and supports Dual Channel Memory Technology.

1. For dual channel conguration, you always need to install identica l (the same

brand, speed , size and chip-type) DDR3/DDR3L DIMM pairs.

2. It is unable to activate Dual Channel Memor y Technolog y with only one memory
module instal led.

3. It is not allowed to install a DDR or DDR2 memory module into a DDR3/DDR3L
slot; otherwise, this motherboard and DIMM may be damaged.

e DIMM only ts in one correct orientation. It will cause permanent dam age to
the mothe rboard and the DIMM if you force the DIMM into the slot at incor rect
orientation .

H110M-ITX/D3

15

English

1

2

English

16

3

2.4 Expansion Slots (PCI Express Slots)

ere is 1 PCI Express slot and 1 mini-PCI Express slot on the motherboard.

Before installing an ex pansion card, please make sure that the power supply is
switched o or the power cord is unplugged. Plea se read the documentation of the
expan sion card and mak e necessary hardware settings for the card before you start
the installation.

PCIe slot:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.

mini-PCIe slot:

MPCIE1 (mini-PCIe slot) is used for WiFi module.

H110M-ITX/D3

17

English