ASRock DN2800MT Owner's Manual

DN2800MT

User Manual

Version 1.0

Published July 2013

Version 1.0

Published July 2013

No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or tness for a particular purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.

e terms HDMITM and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Ma nagement Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. “Perchlorate Material-special handling may apply, see w ww.dtsc.ca.gov/hazardouswaste/ perchlorate”

ASRock Website: http://www.asrock.com

Contents

1 Introduction ....................................................... 5

1.1 Package Contents ......................................................... 5

1.2 Specications ................................................................. 6

1.3 Motherboard Layout ....................................................... 8

1.4 I/O Panel ........................................................................ 10

2 Installation ......................................................... 11

2.1 Screw Holes ................................................................... 11

2.2 Pre-installation Precautions ........................................... 11

2.3 Installation of Memory Modules (DIMM) ........................ 12

2.4 Expansion Slots ............................................................ 13

2.5 Jumpers Setup ............................................................... 14

2.6 Onboard Headers and Connectors ................................ 16

2.7 Driver Installation Guide ............................................ 21

3 UEFI SETUP UTILITY ......................................... 22

3.1 Introduction .................................................................... 22

3.1.1 UEFI Menu Bar .................................................... 22

3.1.2 Navigation Keys ................................................... 23

3.2 Main Screen ................................................................... 23

3.3 Advanced Screen ........................................................... 24

3.3.1 CPU Conguration ............................................... 25

3.3.2 Super IO Conguration ........................................ 26

3.3.3 Chipset Conguration........................................... 27

3.3.4 Storage Conguration .......................................... 28

3.3.5 ACPI Conguration............................................... 29

3.3.6 USB Conguration ............................................... 30

3.3.7 Voltage Conguration ........................................... 31

3.4 Hardware Health Event Monitoring Screen ................... 32

3.5 Boot Screen ................................................................... 33

3.6 Security Screen ............................................................. 34

3.7 Exit Screen .................................................................... 35

4 Software Support .............................................. 36

4.1 Install Operating System ................................................ 36

4.2 Support CD Information ................................................. 36

4.2.1 Running Support CD ............................................ 36

4.2.2 Drivers Menu ........................................................ 36

4.2.3 Utilities Menu........................................................ 36

4.2.4 Contact Information .............................................. 36

Chapter 1: Introduction

Thank you for purchasing ASRock DN2800MT motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contain the conguration

guide to BIOS setup and information of the Support CD.

Because the motherboard specications and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modications of this manual occur, the updated version

will be available on ASRock website without further notice. You may nd

the latest VGA cards and CPU support lists on ASRock website as well.

ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock DN2800MT Motherboard

(Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm)

ASRock DN2800MT Driver CD

ASRock DN2800MT Jumper setting instruction

1 x I/O Panel Shield

1.2 Specications

Form Factor

Processor System

Expansion Slot

Memory

Graphics

Ethernet

SATA

Rear I/O

Dimensions Mini-ITX (6.7-in x 6.7-in)

- Intel® Dual-Core AtomTM CedarView Processor

CPU

Core Number Max Speed N2800: 1.86 GHz L3 Cache N/A Chipset NM10 BIOS UEFI PCI 0 Mini-PCIe 1 (Half Size) + 1 (Full Size, shared with m-SATA) mSATA 1 (share with mini-PCIe) PCIe 1 (x1) CFast Card

Socket Technology Single Channel DDR3 800/1066 MHz SDRAM Max. 4GB Socket 2 x SODIMM

Controller

VRAM Shared Memory VGA Supports max. resolution 1920 x 1200

LVDS

HDMI 1 DVI No DisplayPort No Multi Display Yes (Dual Display) Ethernet 10/100/1000 Mbps Controller GbE LAN: 1 x Intel® 82574L Connector 1 x RJ-45 Max Data Transfer Rate VGA 1 DVI 0 HDMI 1

N2800

- Supports Hyper-Threading Technology

Intel® PowerVR SGX545, Support Directx9 compliant Pixel Shader v3.0 and OGL 3.0

Dual channel 24-bit, max resolution 1920 x 1200@60Hz

SATA2 (3.0Gb/s)

DisplayPort 0 Ethernet 1 USB 4 Audio 2 (Mic-In, Line-Out) Serial 0 PS/2 0 USB 4 (USB 2.0 compliant) LVDS/ Inverter VGA 1 (shared with rear I/O VGA COM) Serial 2 ( RS232) / 4 from TPM header SATA 2 x SATA2 ( 3.0Gb/s)

Internal Connector

Watchdog Timer

Power Requirements

Environment Temperature 0ºC – 60ºC

mPCIe 1 + 1 shared Parallel 1 mSATA 1 shared IrDA 0 GPIO 8-bit 4 in / 4 out SATA PWR Output Con Speaker Header

Output From Super I/O to drag RESETCON# Interval 256 Segments, 0,1,2…255 Sec/Min

Input PWR 9~19V DC-In (DC-Jack or 2-pin PWR Con)

Power On

1/1

AT/ATX Supported

-AT : Directly PWR on as power input ready

-ATX : Press button to PWR on after power input ready

1.3 Motherboard Layout

BIOS Chip

USB6_7

HD_AU DIO1

min i-P CIe / mini -SATA

DN 280 0MT

CI1

Ro HS

INT_ DC1

LVDS1

COM1

HDLED RESET

PLED PW RBTN

PANEL1

AMP_CTL1

MSATA_SEL 1

SATAII_2

SATAII_1

CPU_FAN1

CI2

PCIE 1

JGPIO1

DC_J ACK1

mini-PCIe

SATA_PWR 1

BLT_PWM1

SPDIF1

CS1

TPM1

LPT1

COM2

USB4_5

PS2_K B_MS1

PWR_JP1

VGA2

BAT1

CLRCMO S1

CHA_FA N1

SPEAKER 1

USB 2.0 T: USB 0 B: U SB1

LAN 1

VGA 1

USB 2.0 T: USB 2 B: U SB3

HDM I1

Lin e Out

DMIC1

UPS_ IN1

DC_CTL1

Mic In

AUDIO CODEC

BUZ Z1

1 : 2-pin ATX Power Input/Output Connector

2 : 2-pin UPS Module Power Input Connector

3 : DC_CTL1

4 : SATA Power Output Connector

5 : AMP_CTL1

6 : BLT_PWM1

7 : LVDS Panel Connector

8 : BLT_CTL1

9 : PNL_PWR1

10 : BKT_PWR1

11 : Digital Input / Output Power Select

12 : Digital Input / Output Pin Header

13 :

4-Pin CPU FAN Connector

14 : ATX/AT mode Selection

15 :

System Panel Header

16 : USB2.0 Header (USB4_5)

17 : USB2.0 Header (USB6_7)

18 : DMIC1

19 : RS-232 Port 4 Pin Header (COM1)

20 : RS-232 Port 4 Pin Header (COM2)

21 :

PS2_KB_MS1

22 :

Printer Port Header

23 : TPM Header

24 : CS1

25 : SPDIF1

26 :

Front Panel Audio Header

27 : 3W Audio AMP Output Wafer

28 :

3-Pin Chassis FAN Connector

29 : Chassis Intrusion Headers

(CI1, CI2)

30 : Clear CMOS Header

31 : MSATA_SEL1

32 : VGA2

33 : SATA2 Connectors (SATAII_1, SATAII_2)

1.4 I/O Panel

1 DC Jack (DC_JACK1)

2 USB 2.0 Ports (USB0_1)

* 3 LAN RJ-45 Port (LAN1)

4 VGA Port (VGA1)

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

Activity/Link LED SPEED LED

Status Description Status Description

LAN Port LED Indications

5 USB 2.0 Ports (USB2_3)

6 HDMI Port (HDMI1)

7 Line out (Lime)

8 Microphone (Pink)

ACT/LINK

LED

SPEED

LED

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

LAN Port

Chapter 2: Installation

This is a Mini-ITX form factor (6.7" x 6.7", 17.0 x 17.0 cm) motherboard. Before you

install the motherboard, study the conguration of your chassis to ensure that the

motherboard ts into it.

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

Make sure to unplug the power cord before installing or removing the

2.1 Screw Holes

Place screws into the holes to secure the motherboard to the chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also

remember to use a grounded wrist strap or touch a safety grounded object

before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

+ 25 hidden pages