ASRock 775i65PE-M User Manual

775i65PE-M

User Manual

Version 1.0

Published November 2004

Copyright©2004 ASRock INC. All rights reserved.

1

Copyright Notice:

No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be regis­tered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:

Specifications and information contained in this manual are furnished for informa­tional use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warran­ties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from a n y
defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

ASRock Website: http://www.asrock.com

2

Contents

1 Introduction ................................................... ... 5

1.1 Package Contents................................................................ 5

1.2 Specifications ..................................................................... 6

1.3 Motherboard Layout ........................................................... 8

1.4 ASRock I/O PlusTM .................................................................. 9

2 Installation ............................................. 10

2.1 Screw Holes ...................................................................... 10

2.2 Pre-installation Precautions ................................................ 10

2.3 CPU Installation ................................................................... 11

2.4 Installation of CPU Fan and Heatsink .................................. 13

2.5 Installation of Memory Modules (DIMM) .............................. 14

2.6 Expansion Slots (PCI and AGP Slots) ................................. 15

2.7 Jumpers Setup ................................................................... 16

2.8 Onboard Headers and Connectors .................................... 17

2.9 Serial ATA (SATA) Hard Disks Installation ........................... 20

3 BIOS SETUP UTILITY...................................... 21

3.1 Introduction .......................................................................... 21

3.1.1 BIOS Menu Bar ......................................................... 21

3.1.2 Navigation Keys ....................................................... 22

3.2 Main Screen ........................................................................ 22

3.3 Advanced Screen ............................................................... 22

3.3.1 CPU Configuration .................................................... 23

3.3.2 Chipset Configuration............................................... 24

3.3.3 ACPI Configuration ................................................... 26

3.3.4 IDE Configuration...................................................... 27

3.3.5 PCIPnP Configuration................................................ 29

3.3.6 Floppy Configuration ................................................ 30

3.3.7 Super IO Configuration............................................. 30

3.3.8 USB Configuration.................................................... 32

3.4 Hardware Health Event Monitoring Screen ........................ 32

3.5 Boot Screen ........................................................................ 33

3.5.1 Boot Settings Configuration ..................................... 33

3.5.2 Boot Device Priority .................................................. 34

3.6 Security Screen .................................................................. 34

3.7 Exit Screen .......................................................................... 3 5

3

4 Software Support ........................................... 36

4.1 Install Operating System ............................................... 36

4.2 Support CD Information ................................................. 36

4.2.1 Running Support CD ............................................ 36

4.2.2 Drivers Menu........................................................ 36

4.2.3 Utilities Menu ........................................................ 36

4.2.4 “LGA 775 CPU Installation Live Demo” Program.... 36

4.2.5 Contact Information.............................................. 36

4

Chapter 1 Introduction

Thank you for purchasing ASRock 775i65PE-M motherboard, a reliable motherboard
produced under ASRock’s consistently stringent quality control. It delivers excellent
performance with robust design conforming to ASRock’s commitment to quality and
endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by­step guide to the hardware installation. Chapter 3 and 4 contain the configuration
guide to BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might be
updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest memory and CPU support lists on ASRock website as
well. ASRock website

1.1 Package Contents

ASRock 775i65PE-M Motherboard

(Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm)
ASRock 775i65PE-M Quick Installation Guide
ASRock 775i65PE-M Support CD

(including LGA 775 CPU Installation Live Demo)
One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable
One Ribbon Cable for a 3.5-in Floppy Drive
One Serial ATA (SATA) Data Cable
One Serial ATA (SATA) HDD Power Cable (Optional)
One ASRock I/O PlusTM Shield

http://www.asrock.com

5

1.2 Specifications

Platform: Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm

CPU: 775-Pin Socket

Supporting Intel® Pentium® 4 / Celeron® processor (in 775-land
LGA package)

Chipsets: North Bridge:

Intel® 865PE chipset, FSB @ 800 / 533MHz,
supports Hyper-Threading Technology (see CAUTION 1)

South Bridge:

Intel® ICH5, supports SATA 1.5Gb/s

Memory: 2 DDR DIMM slots: DDR1 and DDR2

supports PC3200 (DDR400) / PC2700 (DDR333) /
PC2100 (DDR266), Max. 2GB (see CAUTION 2)

Dual Channel Memory Technology support (see CAUTION 3)

IDE: IDE1: ATA 100 / Ultra DMA Mode 5

IDE2: ATA 100 / Ultra DMA Mode 5
Supports up to 4 IDE devices

Serial ATA: Supports up to 2 SATA devices at 1.5Gb/s data transfer rate

(Not Support “RAID and “Hot Plug” functions)

Floppy Port: Supports up to 2 floppy disk drives

Audio: 5.1 channels AC’97 Audio

PCI LAN: Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN

Hardware Monitor: CPU temperature sensing,

Chassis temperature sensing,
CPU overheat shutdown to protect CPU life
(ASRock U-COP)(see CAUTION 4),
CPU fan tachometer,
Chassis fan tachometer,
Voltage monitoring: +12V, +5V, +3.3V, Vcore

PCI slots: 3 PCI slots with PCI Specification 2.3

AGP slot: 1 AGP slot, supports 1.5V, 8X/4X AGP card (see CAUTION 5)

USB 2.0: 8 USB 2.0 ports:

includes 6 default USB 2.0 ports on the rear panel,
plus two headers to support 2 additional USB 2.0 ports
(see CAUTION 6)

ASRock I/O PlusTM: 1 PS/2 mouse port,

1 PS/2 keyboard port,
1 serial port: COM1,
1 parallel port: ECP/EPP support,
6 default USB 2.0 ports,
1 RJ 45 port,

6

Audio Jack: Line In / Line Out / Microphone

BIOS: AMI legal BIOS,

Supports “Plug and Play”,
ACPI 1.1 compliance wake up events,
Supports jumperfree,
CPU frequency stepless control
(only for advanced users’ reference, see CAUTION 7)

OS: Microsoft® Windows® 98 SE / ME / 2000 / XP compliant

CAUTION!

1. About the setting of “Hyper Threading Technology”, plea se che ck page 24.

2. Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.

CPU FSB Frequency Memory Support Frequency

800 DDR266, DDR320

533 DDR266, DDR333

* When you use an FSB800-CPU on this motherboard, it will run at

DDR320 if you adopt a DDR333 memory module.

3. This motherboard supports Dual Channel Memory Te chnology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 14 for proper installation.

4. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU a nd the heatsink when you in stall the PC syste m.

5. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!

6. Power Management for USB 2.0 works fine under Microsoft
SP1 / 2000 SP4. It may not work properly under Microsoft
ME.

7. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the

CPU.

*, DDR400

®

Windows® XP

®

Windows® 98/

7

1.3 Motherboard Layout

1

2

3

4

20.3cm (8.0 in)

PS2

Mouse

1

PS2_USB_PWR1

PARALLEL PORT

PS2

Keyboard

ATX12V1

COM1

USB2.0
T: US B2
B:USB3

29

28

27

26

25

24

23

MicIn

B:USB1

USB2.0
T: US B4
B:USB5

Bottom:

1

USB2.0

T: US B0

RJ-45

Top:

1

USB4_5

LineOut

Center:

LineIn

Top:

2Mb

BIOS

PCI
LAN

AUDIO
CODEC

5.1CH

AUDIO1

CD1

JR1

JL1

22

21

Super

I/O

USB2.0

AUX1

20

ATXPWR1

CPU_FAN1

1

FSB1

1

GAME1

19

AGP8X

1.5V_AGP1

PCI 1

PCI 2

PCI 3

Intel

865PE

Chipset

18

1

FLOPPY1

USB67

Intel
ICH5

CMOS

Battery

IR1

1

CLRCMOS0

16

17

775i65PE-M

1

SPEAKER1

15

DDR1 (64/72bit, 184-pin module)

PLED PWRBTN

1

HDLED RESET

DDR2 (64/72bit, 184-pin module)

SATA2

SATA1

PANEL1

14

IDE2

Dual Channel

IDE1

13

5

24.4cm (9.6 in)

6

7
8

9

SATA

10
11
12

CHA_FAN1

1 PS2_USB_PWR1 Jumper 16 Clear CMOS Jumper (CLRCMOS0)
2 A TX 12V Connector (A TX12V1) 17 Infrared Module Header (IR1)
3 775-Pin CPU Socket 18 Floppy Connector (FLOPPY1)
4 184-pin DDR DIMM Slots (DDR1- 2) 19 Game Port Connector (GAME1)
5 Secondary IDE Connector (IDE2, Black) 20 Internal Audio Connector: AUX1 (White)
6 Primary IDE Connector (IDE1, Blue) 21 Internal Audio Connector: CD1 (Black)
7 North Bridge Controller 22 JR1 / JL1 Jumpers
8 AGP Slot (1.5V_AGP1) 23 Front Panel Audio Header (AUDIO1)
9 South Bridge Controller 2 4 PCI Slots (PCI1- 3)
10 Secondary Serial ATA Connector (SA T A 2) 25 FSB Select Jumper (FSB_SEL1)
11 Primary Serial A TA Connector (SA T A 1) 26 BIOS FWH Chip
12 USB 2.0 Header (USB67, Blue) 27 Shared USB 2.0 Header (USB4_5, Blue)
13 Chassis Fan Connector (CHA_FAN1) 28 CPU Fan Connector (CPU_FAN1)
14 System Panel He ader (P ANEL1) 29 ATX Power Connector (ATXPWR1)
15 Chassis Speaker Header (SPEAKER 1)

8

1.4 ASRock I/O Plus

TM

1

11

1 Parallel Port 7 USB 2.0 Ports (USB01)
2 RJ-45 Port 8 USB 2.0 Ports (USB23)
3 Line In (Light Blue) 9 Serial Port: COM1
4 Line Out (Lime) 10 PS/2 Keyboard Port (Purple)
5 Microphone (Pink) 11 PS/2 Mouse Port (Green)
6 Shared USB 2.0 Ports (USB45)

2

8910

7

6

3

4

5

9

Chapter 2 Installation

775i65PE-M is a Micro ATX form factor (9.6" x 8.0", 24.4 x 20.3 cm) motherboard.
Before you install the motherboard, study the configuration of your chassis to
ensure that the motherboard fits into it.

Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so may cause physical injuries to you and
damages to motherboard components.

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the
chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components
or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity , NEVER
place your motherboard directly on the carpet or the like. Also remember to use
a grounded wrist strap or touch a safety grounded object before you handle
components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.

10

Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.

2.3 CPU Installation

For the installation of Intel 775-LAND CPU,
please follow the steps below.

Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.

775-Pin Socket Overview

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

Lift Lever Up to 90°

down and out on the hook to clear
retention tab.

Step 1-2. Rotate the load lever to fully open po-

sition at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open po-

sition at approximately 100 degrees.

Step 2. Insert the 775-LAND CPU:

Step 2-1. Hold the CPU by the edges where are

marked with black lines.

Step 2-2. Orient the CPU with IHS (Integrated

Heat Sink) up. Locate Pin1 and the two
orientation key notches.

Pin1

orientation

key notch

orientation

key notch

CPU Marked Corner

Socket Marked Corner

alignment key

Pin1

black line

black line

alignment key

775-LAND CPU

775-Pin Socket

11