General notes
Technical Documentation guidelines
----------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------
You can find herewith some generic information to simplify cunsulting of technical documentation:
1. Models of same range share the same exploded views, which report the richest set of spare parts:generally, a model does not
necessarly have a related spare part for each particular shown on exploded views.
2. Some spare parts can not be represented directly on the exploded views (instruction booklets, specific kit, etc...). You can find
those codes in the spare parts list with the same reference of particular where spares are installed or with references 099, 999.
Instruction booklets, once managed, appear with 000 reference.
3. On the higher right site of each exploded view there is a serial number which indicates the beginning of the production of
certain range:some models might have more than an exploded view for a given category, each distinguished by a different serial
no.and linked to another spare parts list, In this case, serial no. is required to supply the right spare part code. Exploded view to be
considered is the one with a more recent serial no. but previous than the one of the model that needs assistance.
4.Exploded views might require further updates even after publishing. Addition of new spares will go on following the already
existing numeration references. Revision number of an exploded view is shown into last four digits of serial number into upper
right hand corner.
5.The spare parts list associated to an exploded view shows related codes of spares managed for a certain model; for each spare
part other informations are available:
REF: reference no of spare into a table; SUBSTITUTE: list of spare(s) which can replace a code but that keeps same functional
characteristics
INDUSTRIAL CODE: list of variables of a model (shown into model label) where such spare is used; NOTICE: code of
information(s) to refer to complete technical intervention, track for changes or to find correct spare part code.
6. Some notices, into a same section are generic therefore cannot be directly linked to a spare part. In order to assist a model in
the best way as possible, it is helpful to pay attention to all notices and constantly verify documentation updates
7.Technical documentation cover shows model name and its commercial codes
mod.AQM8F49UFR page 2
1180410D Spare parts
list
Ref. Code From To S/N Substitute Description Notice Industrial
001 C00087921 screw amsp m3.5x30t.e.(s/n
002 C00255435 blower fan for motor wd vpl
003 C00032972 blower fixing nut
004 C00255437 blower manifold seal vpl
005 C00265612 dryer heating element 230v
006 C00083915 thermistor ntc
007 C00255434 o-ring d= 8.75 wd vpl
008 C00255718 hose clamp
009 C00032845 restrictor seat
010 C00080960 00221... self blocking nut m5 n4211c00
011 C00097378 00221... connection gasket n4211c00
012 C00259997 00221... bolt m5x55 te inox430 x wd vpl n4211c00
013 C00143949 00221... lint filter n4211c00
013 C00280633 00222... steam filter new n4211c00
014 C00080774 hose clamp
015 C00255440 00222... steam condenser vpl n4211c00
015 C00280826 00221... steam condenser vpl n4211c00
016 C00080769 hose electrovalve condenser
017 C00255433 01211... seal - condenser / tank vpl
017 C00284582 01212... seal - condenser / tank vpl
018 C00268334 blower manifold kit vpl 62 lt
018 C00286406 screw plast 9.5x25 tc-t30
019 C00054790 screw trilob m5 x 16 tcb t.e. st
021 C00098711 1 x C00278310 dryer fan motor 230v 50hz wd-
1 x C00278679
023 C00255439 00221... spacer condenser n4211c00
099 C00115565 screw m8x30 t30
mod.AQM8F49UFR page 4