Components
A
2 x Top and Bottom Panel
B
1 x Shelf
2 x Side Panel
C
D
2 x Back Panel
Maine Basic Modular 2 Half Doors
Simple Assembly Instructions - Please keep for future reference
E
2 x Door
I
2 x Metal Plate
Fittings
A
8 x Screw
2 x Screw
E
2 x Long Dowel
I
F
2 x Vertical Support
2 x Handle
J
16 x Nail
B
2 x Screw
F
2 x Moveable Hinge
J
C
2 x Hinge
G
G
H
2 x Door Stopper
8 x Dowel
8 x Plastic Plug
4 x Screw
D
1 x Nail Guide
H
IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
8-05
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
Assembly Instructions
Assembly Instructions
Stage 2 – Fitting the Top/Bottom PanelStage 1 – Fitting the Side Panel
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Long Dowels I to fix the
Vertical Supports F onto the
Shelf B.
See fig. 1.
2. Use Dowels C to fix the Side
Panels C onto the unit.
See fig. 2.
3. Insert Dowels C onto the Vertical
Supports.
See fig. 2.
fig. 1
C
F
NOTE: It would be useful to ask
B
I
F
C
someone to help you at this
stage.
1. Use Screw A to fix the Top and
Bottom Panel A onto the unit.
See fig. 3.
fig. 3
A
A
C
A
A
fig. 2
C
C
C
Assembly Instructions
Assembly Instructions
Stage 4 – Fitting the Door StopperStage 3 – Fitting the Back Panel
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Carefully lay the unit flat.
See fig. 4.
2. Use Nails B to fix the Back
Panels D onto the unit.
See fig. 4.
NOTE: Use Nail Guide H to keep
a constant distance from the
edge to the Nail B.
fig. 4
B
H
D
G
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Screws D to fix the Door
Stoppers H onto the unit.
See fig. 6.
D
2. Use Screw E to fix the Metal
Plate I onto the Doors E.
See fig. 8.
H
D
fig. 6
J
3. Use Plastic Plugs G to cover the
Screw Heads.
See fig. 5.
fig. 7
3. Locate the Hinges G into the
bottom of the door. Then place
the Moveable Hinges J into the
top of the door.
See fig. 8.
J
fig. 5
G
4. Use Screws F to fix the Handles
J onto the Doors.
See fig. 8.
G
F
E
I
E
G
F
E
I
J
Assembly Instructions
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Carefully place the Doors Hinges
into the lower hinge holes. Then
depress the moveable hinge and
slide into unit to make connection
with upper hinge holes.
See fig. 8.
Assembly Instructions
Stage 6 – Finishing the UnitStage 5 – Fitting the Doors
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Carefully place the unit in the
desired location.
See fig. 9.
fig. 8
fig. 9
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
Fitting
From time to time please ensure there are no loose screws on the product.
Maine Basic Modular 2 Half Doors
Assembly Instructions - Please keep for future reference
609/0069
609/2586
609/2610
609/2641
609/2672
610/8937
875/4396
875/4406
Dimensions
Width - 60.1cm
Depth - 29.9cm
Height - 60cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Ref. no. 609/0069,609/2562,609/2610,609/2641,609/2672,610/8937,875/4396 ,875/4406 Date: 12/22/09
1
Components - Panels
Please check you have all the panels listed below
Top/Bottom Panel x 2
1
(600 x 295mm)
Vertical Support x 2
4
(294 x 276.5mm)
Side Panel x 2
2
Shelf Panel
3
(569 x 294mm)
(569 x 294mm)
Back Panel x 2
5
(295 x 596mm)
Door Panel x 2
6
(271 x 271mm)
2
Components - Fittings
call the Customer Helpline: 08456 400800
Note: The quantities below are the correct amount to complete the assembly. in some cases mor
may be supplied than are required.
If you have damaged or missing components,
A
25mm Screw x 2
D
Door Hinge x 4
G
Nail Guide x 1
J
B
Handle x 2
E
40mm Screw x 8
H
Door Stopper x 2
K
C
Metal Plate x 2
F
Nail x 16
I
Long Wooden Dowel x 2
L
Wooden Dowel x 8 Covering Sticker x 4 10mm Screw x 2
M
14mm Screw x 4
Tools required
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Bradawl
(or sharp point)
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
3
Small
hammer
0 1 2 3 4 5 6
110 120 130 140 1500 10 20 30 40 50 60 70 80 90 100
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
105
110 115 120 125 130 135 140 145 150 155 160 165 170
Assembly Instructions
Step 1
a:
Attaching the side
panels
a:
Use Long Wooden
Dowels to x the Vertical
Supports onto the Shelf
Panel .
I
4
3
b:
Finished
front edge
4
4
I
3
I
b:
Use Wooden Dowels
to x the Side Panels
onto the Shelf Panel .
J
2
3
Step 2
Attaching the door
panels
a:
J
2
J
Finished
front edge
3
J
J
D
2
a:
Use Screws to x the
Metal Plates onto the
Door Panels .
Use Screws to x the
Handles onto the Door
Panels .
Insert the Door Hinges
into the Door Panels .
B
6
L
C
6
A
D
6
6
L
A
D
C
x 2
B
4
Assembly Instructions
Step 2 - continued
b:
Insert Wooden Dowels
J
onto the unit.
Carefully locate the Door
Panel onto the unit,
aligning the Door Hinges
with the corresponding
holes.
Use Screws to x the
Bottom Panel onto the
unit.
Note:
Ensure the Door
Hinges are aligned with
the corresponding holes.
6
E
1
b:
Finished
front edge
E
E
1
E
J
J
6
E
c:
Insert Wooden Dowels
J
onto the unit.
Carefully locate the Door
Panel onto the unit,
aligning the Door Hinges
with the corresponding
holes.
Use Screws to x the
Top Panel onto the unit.
Note:
Ensure the Door
Hinges are aligned with
the corresponding holes.
6
E
1
c:
Finished
front edge
E
E
1
E
J
J
6
E
5
Assembly Instructions
Step 3
Fixing back panel
a:
Back Panels onto the
unit.
Note:
Use Nail Guide to
keep a constant distance
from the edge.
F
5
Important:
The cabinet MUST
be ‘square’ when the
back is attached.
G
a:
F
G
5
5
Unnished
back edge
Step 4
Attaching door stopper
a:
Door Stoppers onto the
unit.
M
H
a:
H
M
H
6
Assembly Instructions
Step 5
Attaching the
covering sticker
a:
Use Covering Sticker
to cover the screw heads.
K
K
a:
K
K
K
Step 6
Finishing the unit
Note:
It would be useful
to ask someone to help
you at the stage.
With help, place the unit in
the intended position.
The assembly is now
complete.
If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
7
Boston Basic Modular 2 Half Door
Assembly Instructions - Please keep for future reference
609/0069
609/2610
610/8937
413/6815
414/1941
Dimensions
Width - 60cm
Depth - 30cm
Height - 60cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Version 3 Date: 19/03/15
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• From time to time check that
there are no loose screws on
this unit.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Handy Hints
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
that all bolts and fi ttings are
tightend properly.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
If you have damaged or missing components, call the
Components - Panels
Customer Helpline:
Please check you have all the panels listed below
Top/Bottom panel x 2
1
(60 x 29.5cm)
Argos = 0345 6400800
Pilot holes for
guidance only
Vertical support x 2
4
(29.4 x 27.65cm)
Side panel x 2
2
(56.9 x 29.4cm)
Shelf
3
(56.9 x 29.4cm)
Back panel x 2
5
(29.5 x 59.6cm)
Pilot holes for
guidance only
Door panel x 2
6
(27.1 x 27.1cm)
2
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly. in some cases mor
may be supplied than are required.
A
25mm Screw x 2
D
Door hinge x 4
G
12mm Screw x 6
J
30mm Dowel x 8
B
Handle x 2
E
40mm Screw x 8
H
Door stopper x 2
K
Screw cover x 4
C
Metal plate x 2
F
Nail x 20
I
50mm Dowel x 2
Tools required
Phillips screwdriver
(medium & large)
7mm Suitable drill bit
(for use with wall plug)
Drill
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
The screws length is measured from the head to the point (30mm screw shown).
3
105
Small
hammer
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
110 115 120 125 130 135 140 145 150 155 160 165 170
Assembly Instructions
Step 1
Attaching door
stoppers
Door stoppers onto the
Vertical supports .
G
H
4
Finished
front edge
G
H
4
G
H
X 2
Step 2
Attaching metal plates
& door hinges
G
Metal plates onto the
Door panels .
Insert the Door hinges
into the Door panels .
C
6
D
6
D
6
D
G
C
X 2
4
Assembly Instructions
Step 3
a:
Attaching the side
panels
Insert Dowels into
a:
the
Shelf and Vertical
supports .
the Shelf .
3
4
supports onto
3
J
I
4
Finished
front edge
J
J
J
Finished
front edge
J
4
I
J
3
4
I
J
J
J
b:
Fix the
onto the Shelf .
p
3
2
b:
2
Finished
front edge
3
2
5
Assembly Instructions
Step 4
a:
E
Attaching the door
panels
a:
Carefully locate the Door
panel onto the unit,
aligning the Door hinges
with the corresponding
holes.
Bottom panel onto the
unit.
Note:
Ensure the Door
hinges are aligned with
the corresponding holes.
6
E
1
Finished
front edge
E
1
E
6
E
b:
Carefully locate the Door
panel onto the unit,
aligning the Door hinges
with the corresponding
holes.
Top panel onto the unit.
Note:
Ensure the Door
hinges are aligned with
the corresponding holes.
6
E
1
b:
Finished
front edge
E
E
1
E
6
E
6
Assembly Instructions
Step 5
Fixing back panel
Attach Back panels
5
onto the unit using Nails
F
.
Important:
The unit MUST
be ‘square’ when
back is attached.
back surface
F
5
5
back edge
21
Step 6
Attaching the handles
A
Handles onto the Door
panels .
B
6
B
6
6
A
A
B
7
Assembly Instructions
Step
7
Attaching the screw
covers
Use
Screw covers to
cover the screw heads.
K
K
K
K
K
Step 8
Finishing the unit
Note:
It would be useful
to ask someone to help
you at the stage.
With help, place the unit in
the intended position.
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
8
Loading...