
Components
A
1 x Top Panel
D
1 x Bottom Panel
Maine Basic Modular 2 Doors
Simple Assembly Instructions - Please keep for future reference
B
1 x Shelf
C
2 x Side Panel
8 x Plastic Plug
G
4 x Shelf Support
H
4 x Support Cover
I
2 x Handle
J
E
2 x Door
F
2 x Back Panel
K
2 x Metal Plate
L
1 x Door Stopper
IMPORTANT
Fittings
A
8 x Screw
2 x Screw
E
16 x Nail
B
2 x Screw
F
4 x Hinge
C
1 x Nail Guide
G
2 x Screw
D
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
8-05
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.

Assembly Instructions
Assembly Instructions
Stage 2 – Fitting the DoorsStage 1 – Fitting the Side Panel
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Screw A to fix the Side Panels
C onto the Bottom Panel D.
See fig. 1.
NOTE: Ensure the shelf fixing
holes on Side Panels C face
inwards.
C
fig. 1
D
C
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Insert the Hinges C into the
Doors E.
See fig. 3.
2. Carefully locate the Doors onto
the unit, aligning the Hinges with
the corresponding holes.
A
E
See fig. 3.
C
fig. 3
C
A
C
C
2. Use Screws E to fix the Metal
Plates K onto the Doors E.
See fig. 2.
3. Use Screws F to fix the Handles
J onto the Doors.
See fig. 2.
K
F
E
J
fig. 2
3. Use Screws A to fix the Top
Panel A onto the unit.
See fig. 4.
J
NOTE: Ensure the Hinges are
aligned with the corresponding
holes.
A
fig. 4

Assembly Instructions
NOTE: It would be useful to ask
someone to help you at this
stage.
Assembly Instructions
Stage 4 – Fitting the ShelfStage 3 – Fitting the Back Panel
1. Carefully lay the unit flat.
See fig. 5.
2. Use Nails B to fix the Back
Panels F onto the unit.
See fig. 5.
NOTE: Use Nail Guide G to keep
a constant distance from the
edge.
1. Insert Shelf Supports H into the
holes in the unit. Then use Support
Covers I to cover the Shelf
Supports.
See fig. 6.
H
NOTE: Adjust the shelf supports
B
G
F
fig. 5
to the desired height.
I
H
fig. 6
2. Slide Shelf B into the unit.
See fig. 7.
B
fig. 7

Assembly Instructions
Assembly Instructions
Stage 6 – Finishing the UnitStage 5 – Fitting the Door Stopper
L
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Screw D to fix the Door
Stopper L onto the unit.
See fig. 8.
NOTE: It would be useful to ask
someone to help you at this
stage.
D
1. Carefully place the unit in the
fig. 8
G
desired location.
See fig. 10.
fig. 10
2. Use Plastic Plugs G to cover the
Screw Heads.
See fig. 9.
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
G
fig. 9
Fitting
From time to time please ensure there are no loose screws on the product.

Maine Basic Modular 2 Doors
Assembly Instructions
-
Please keep for future reference
609/0045
609/2579
609/2603
609/2634
609/2665
610/8913
875/4372
875/4389
Dimensions
Width - 60.1cm
Depth - 32.3cm
Height - 60cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the
Ref. no. 609/0045,609/2579,609/2603,609/2634,609/2665,610/8913,875/4327,875/4389 Date: 18/12/09
Customer Helpline: 08456 400800

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Do not stand on the product,
components and tools listed on
pages 2 and 3.
plastic bags and separate them
into their groups.
away from the work area, small
parts could choke if swallowed.
space to layout the parts before
starting.
Glue safety - Take care when using glue, please follow the advice below
this could cause damage.
room) as possible.
surface to avoid damaging the
easier with 2 people.
as this could damage the unit.
Only use hand screwdrivers.
carefully and responsibly.
Note:
Only apply the glue
once you are sure of the
assembly.
recommend the
use of power
drill/drivers for
inserting screws,
Skin contact: Remove
contamination by washing with
soap and water. This procedure
should also be followed prior to
eating and drinking.
Care and maintenance
and mild detergent, do no use
bleach or abrasive cleaners.
Eye contact: Rinse immediately
with clean water for 15 minutes
and seek medical advice.
there are no loose screws on
this unit.
If swallowed: Seek medical
advice immediately.
discarded with household
waste. Take to your local
authority waste disposal centre.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1