Page 1
Loop leg TV Unit
Assembly lnstructions - Please keep for future reference
482/8893
Dimensions
Width - 1100 mm
Depth - 400 mm
Height - 450 mm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Issue 25 - 09 - 15
Page 2
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Keep this instructions for future
use.
Do not stand or put excessive
weight on the product, this
could cause damage.
From time to time check that
there are no loose screws on
this unit.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Page 3
Components - Parts
underside
lf you have damaged or missing components.
call the Customer Helpline:
0345 6400 800
Base panel x 1 Leg x 2
1
(1100*400*25mm)
inside
3
Side panel (left) x 1
(320*399*25mm)
2
4
(350*80*40mm)
inside
Side panel (right) x 1
(320*399*x25mm)
underside
Back panel x 1
5
(1056*330*3mm)
underside
7
Shelf x 1
(1045*384*25mm)
Top x 1
6
(1100*400*25mm)
2
Page 4
Components - Fittings
0345 6400 800
A
B C
42mm Wood screw x 4 Wooden dowel x 816mm M6 Bolt x 8
D E F
Metal dowel x 4
G
Sticker x 4
Locking nut x 4
H
4mm Allen key x 1
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
0
1 2 3 4 5 6
Ruler/tape measure
F
Shelf support pin x 4
Phillips screwdriver
(Not supplied)
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
3
Page 5
Assembly Instructions
Preparing top
Carefully place
6
top upside down on the
floor with the fixing holes
facing up.
D
Screw metal dowels
into top .
Screw dowels as
Note :
far as shown. Do not over
tighten.
6
D
D
Assembling legs
Carefully place
base panel upside down
on the floor with the fixing
holes facing up.
1
6
underside
D
A
2
Assemble legs to base
panel using screws .
1
2
A
1
underside
2
4
Page 6
Assembly Instructions
Attaching sides
Carefully turn
base panel onto it’s side
as shown.
1
B
Fit wood dowels into the
holes in base panel as
shown.
Locate side panels and
4
into position and secure
using screws .
Note :
Ensure the grooves
in side panels and
are correctly aligned with the
groove in base panel .
C
1
3
B
3
4
1
Fitting back panel
C
1
4
Align grooves
3
Turn the unit upright.
Carefully slide back panel
into the grooves as shown.
5
5
3
4
5
Page 7
Assembly Instructions
Assembling top
Fit wood dowels into the
top of side panels and
4
.
Carefully locate top into
position.
Insert locking nuts into
the holes in side panels
4
and .
Turn locking nuts clockwise to secure.
Stickers can be used to
cover the fixing holes.
G
C
3
6
E
3
E
E
6
C
3
G
E
4
Locating shelf
Insert shelf support pins
at the desired height.
Carefully locate shelf into
position.
F
7
3
4
F
7
6
Page 8
Assembly Instructions
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
7
Loading...