APW Wyott LSCTI-X Installation Manual

R

INSTALLATION AND OPERATING INSTRUCTIONS

Condiment Dispenser Pump

MODEL:

LSCTI-X

PRODUCT MANUAL

Installation Instructions

Operation Instructions

Adjustment Instructions

Cleaning Instructions

Replacement Parts List

Warranty/Service Information

24 Hour Toll Free

Service Hot Line:

1-800-733-2203

Please complete this information and retain this manual for the life of the equipment. For
WarrantyServiceand/or Parts,this information isrequired.

ModelNumber SerialNumber DatePurchased

P/N 88723-00 9/05

APW WYOTT Foodservice Equipment Company

P.O. Box 1829

Cheyenne, WY 82003
[phone] Phone [phone] TollFree
[phone] Fax www.apwwyott.com

1

Instructions for Operating, Adjusting & Cleaning the LCSTI-X Condiment Dispenser Pump

NOTE: Clean the pump thoroughly in a sanitizing solution before using it for the first time.

Installation:

1. Selecta diskfrom thecondiment cardto identify theproduct tobe dispensed.

2. Unscrew the insert cover nut from the lever, and place the disk under the clear insert.
Replacethe insertcover nut.

3. Placethe pumpand lidin thecontainerof condiment.

Operation:

To operate the pump, press the lever knob down until it stops; then release it. A brisk, smooth
strokedelivers thecondiment uniformly.

Adjustment:

Adjust the pump to deliver the amount of condiment you require. Depending on the condiment,
thepump candispense upto about1 ½ounces with onestroke.

1. Removethe leverscrew andfold thelever back outof theway.

2. Turn the upper spring cage clockwise for a smaller portion of condiment and
counterclockwisefor alarger portion.

3. Turnthe upper springcage sothe leverfits down in the slot.

4. Replacethe leverand leverscrew.

Cleaning:

Cleanthe pump accordingto theinstructions below.

youcan reassembleit inreverse order.

1. Removethe hairpinclip onthe bottomof the pump.

2. Removethe cup.

3. Removethe intakevalve.

4. Removethe leverscrew andlift the leverout ofthe slotin theupper springcage.

5. Removethe upperspring cageby turningit counterclockwise.

6. Removethe springand lowerspring cage.

7. Removethe piston.

8. Wash all pump parts thoroughly in a sanitizing solution, using the brush provided; rinse the

9. Reassemblethe pumpusing reverseProcedure.

Warranty:

Labor: 90 Days
Parts: 12Months

daily Notethe waythe pumpcomes apartso

partsin hotwater and allowthem toair dry.

PLEASE PLACE THESE INSTRUCTIONS WHERE THEY MAY BE REFERRED

TO BY THOSE PERSONS USING AND CLEANING THE PUMP

2