I. PRINCIPLE OF OPERATION
The Model 1700 Dehumidifier may be difficult to access in locations such as attics and crawlspaces,
and you may wish to control the moisture level in a specific area, such as a living room or master
bedroom. The Model 70 Living Space Control provides you with a convenient, accessible means of
turning the Model 1700 Dehumidifier on and off and allows for adjustment of the dryness level set
point. The Model 70 Control contains its own sensors that override the Model 1700 main control board
sensors when connected and enabled.
II. GETTING FAMILIAR WITH YOUR MODEL 70 CONTROL
See Figures 1 and 2 for a description of the Living Space Control.
BASIC FUNCTIONS
“ON” and “OFF” buttons allow you to turn the Model 1700 Dehumidifier on and off.
▲▼ buttons allow you to adjust the dryness set point from “LESS DRY” to “MORE DRY”.
Room RH (Relative Humidity) is displayed at all times.
III. OPERATING INSTRUCTIONS
LCD Display (see Figure 2)
▲▼ Buttons –
Use to raise or
lower the dryness
level set point
from “MORE DRY”
to “LESS DRY”.
Mode Buttons –
Use to turn
Model 1700
Dehumidifier
on or off.
Figure 1 – Living Space Control
Figure 2 – LCD Display
Current Room RH
(Relative Humidity)
Status Indicator:
Solid “ON” = Control
is on and dehumidifier
is enabled.
Blinking “ON” =
Dehumidifier is running.
“ON” not displayed =
Dehumidifier is off.
Dryness Set Point
Bar Display
“MORE DRY”,
“LESS DRY”, and
Bar Display disappear
10 seconds after final
adjustment is made
using ▲▼ buttons