Page 1
Installation and Operation
bu149a
™
Back-UPS
Installation
Pro Battery Pack
bu0151 a
Battery Maintenance and Storage Guidelines
Please follow these Guidelines to get the best performance
possible from your UPS.
1. Keep the UPS in a cool location.
2. Turn the UPS OFF when connected equipment is not in
use. If the connected equipment will not be used for a long
period of time, turn the UPS OFF to preserve the battery.
3. Manage UPS Shut down in regions having frequent
outages. Promptly save your files and shut down your
computer at the onset of a power outage to preserve battery
life and reduce recharge time. If the UPS was supplied with
a computer cable, you can automate this process by down
loading and configuring PowerChute
™
software.
4. Replace the battery after extended storage. If it is not
possible to recharge the stored UPS battery following 6
months of storage, it is recommended to purchase a genuine
APC Replacement Battery Cartridge (APCRBC) to
maintain optimal performance of the UPS. Note: APC’s
UPS inventory policy is to recharge the UPS before storage
causes loss of run time performance.
5. Battery wear and warranty. Eventually, the battery will
become worn from use and require replacement. Normal
battery wear is not covered by the Limited Warranty.
Contact APC to purchase a genuine APC Replacement
Battery Cartridge (APCRBC).
APC by Schneider Electric IT Customer Support Worldwide
For country specific customer support, go to the APC by
Schneider Electric Web site, www.apc.com.
Specifications
Model BR24BPG
Battery Voltage 24 Vdc (nominal)
Typical Recharge Time 24 hours
o
Operating Temperature 0
Storage Temperature -5
Operating / Storage
Relative Humidity
Size (H x W x D) 30.1 x 11.2 x 38.2 cm
Weight 13.4 kg (29.5 lb)
Shipping Weight 14.6 kg (32.2 lb)
to 40oC (32o to 104oF)
o
to 45oC (23o to 113oF)
0 to 95% non-condensing
(11.9 x 4.4 x 15 in)
Limited Warranty
The standard warranty is three (3) years from the date of
purchase. (Valid in U.S., Canada, and European
Community only. For all other regions, the standard
warranty is two (2) years from the date of purchase).
APC’s standard procedure is to replace the original unit
with a factory reconditioned unit. Customers who must
have the original unit back due to the assignment of
asset tags and set depreciation schedules must declare
such a need at first contact with an APC Technical
Support representative. APC will ship the replacement
unit once the defective unit has been received by the
repair department, or cross-ship upon the receipt of a
valid credit card number. The customer pays for
shipping the unit to APC. APC pays ground freight
transportation costs to ship the replacement unit to the
customer.
Customer support and warranty information is available at the APC by Schneider Electric Web site, www.apc.com.
© 2014 APC by Schneider Electric. APC, the APC logo, and Back-UPS are owned by Schneider Electric Industries S.A.S.,
or their affiliated companies. All other trademarks are property of their respective owners.
EN 990-3891B
10/2014
Loading...