American Power Conversion AP9825I User Manual
Declaration of Conformity
Application of Council
Directives
89/336/EEC
Standards to Which
Conformity is
Declared
EN55022: 1995
EN50082-1: 1992, including:
IEC 1000-4-2: 1995
IEC 1000-4-3: 1995
IEC 1000-4-4: 1995
Manufacturer’ s Name
and Address
American Power Conversion
132 Fairgrounds Road
West Kingston, Rhod e I s land 02892
USA
–or–
American Power Conversion (A.P.C.) b.v.
Ballybritt Business Park
Galway, Ire land
Importer’s Name and
Address
American Power Conversion (A.P.C.) b.v.
Ballybritt Business Park
Galway, Ire land
T ype of Equip ment
UPS Accessory Equipment
Model Numbers
AP9825i
Serial Numbers
WA9901000000–WA0052999999
Years of Manufacture
1999, 2000
Table 1:
St. Louis, MO, USA June 24, 1999
Ted Eckert
Regulatory Compliance Engineer
Galway, Ire land
June 24, 1999
Ray Ballard
General Manage r, Galway
We, the undersi gned, hereby declare that the equipment specified ab ove
conforms to the above directives
.
Place
Place
Date
Date
992-0014 8/99
Isolated Extension Cable Operation and LEDs
Behavior of UPS
End LEDs
When illuminated yellow, the
UPS ON
and
UPS OFF LED
s
on the
UPS
End Unit indicate that the
UPS
is being momen-
tarily commanded to turn its output on or off.
Note
: These indicators do
not
reflect the curr ent state of
the
UPS
.
Normal
operation:
Smart-Signaling
UPSs
Under normal operation with an
APC UPS
that uses Smart
Signaling—Smart-UPS
®
, Matrix-
UPS
™
, or Symmetra™
PowerArray
™
—only the
RXD/AC FAIL LED
on the Server
End Unit and the
DATA LED
on the
UPS
End Unit flicker;
no other
LED
s illuminate.
Normal
operation:
Simple-Signaling
UPSs
Under normal operation with an
APC UPS
that uses Simple
Signaling—Back-
UPS
®
— no
LED
s on either unit will illuminate. To test the Isolated Extension Cable connected to a
Back-
UPS
:
1Put the
UPS
into an AC Fail condition. (See the
user manual supplied with your
UPS
.)
2 Observe that the
RXD/AC F AIL LED
on the Server
End Unit turns green, indicati ng that t he
UPS
is on
battery.
For further information on this subject, see pages 7 and 8,
Isolated Extension Cable User Manual.
Loading...