Residential Gas
Water Heaters
FEATURES
INTELLIGENT CONTROL LOGIC
The internal microprocessor provides enhanced operating parameters and tighter
differentials for precise sensing and faster heating response to optimize performance.
SELF-POWERED ELECTRONIC GAS VALVE
Uses a thermopile to generate the power needed to operate the electronic gas control
without requiring an external power source.
DIAGNOSTICS
The electronic gas control incorporates an LED status indicator that monitors system
operation & service diagnostics.
DYNACLEAN™ DIFFUSER DIP TUBE
Helps reduce lime and sediment buildup, maximizes hot water output. Made from
long-lasting PEX cross-linked polymer.
GREEN CHOICE® GAS BURNER
Patented “Eco-Friendly” design reduces NOx emissions by up to 33% and complies with
requirements for low NOx emissions.
“ENVIRONMENTALLY-FRIENDLY” 2 INCH NON-CFC FOAM INSULATION
IMPROVES EFFICIENCY
COREGARD
An A. O. Smith exclusive. Aluminum anode has stainless steel core, protects tank
against corrosion.
™
ANODE ROD
PUSH-BUTTON PIEZO IGNITOR
Makes lighting pilot fast and easy with one-hand push-button spark ignition.
DURABLE, TAMPER-RESISTANT BRASS DRAIN VALVE
BLUE DIAMOND
Provides superior corrosion resistance to industry-standard glass lining.
®
GLASS COATING
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
Top-mounted T&P relief valve available as option on all models.
CODE COMPLIANCE
UBC, CEC, SBCC, HUD and BOCA National Codes. Meets the thermal
efficiency and standby loss requirements of the U.S. Department of Energy and
current edition of ASHRAE/IESNA 90.1 and meets the Federal Energy Efficiency
Standards effective January 20, 2004, according to the National Appliance Energy
Conservation Act (NAECA) of 1992.
DESIGN-CERTIFIED BY CSA INTERNATIONAL
According to ANSI Z21.10.1 - CSA 4.1 Standards governing storage-type water heaters.
®
FLAMMABLE VAPOR IGNITION RESISTANT COMPLIANT DESIGN
See other side.
6-YEAR LIMITED TANK AND PARTS WARRANTY
For complete information, consult written warranty or A. O. Smith Water
Products Company.
A. O. Smith Corporation • 500 Tennessee Waltz Parkway • Ashland City, TN 37015 • 800-527-1953 Toll-free USA
www.hotwater.com
Page 1 of 2
Revised September 2014 AOSRG45351
Residential Gas
Water Heaters
MODEL
NUMBER
TALL MODELS
GVR-30 300/301 67 .62 30 35,500/32,000 36 2 61-1/2 58 18 13 8 52 3 or 4 126
GVR-40 300/301 70 .62 40 40,000/36,000 41 2 61-3/4 58-1/4 20 13 8 51-3/4 3 or 4 150
GVR-50 300/301 88 .62 50 40,000/37,000 41 2 61 57-1/4 22 13 8 50-1/4 3 or 4 165
SHORT MODELS
GVRL-30 401 60 .61 30 32,000 36 2 50 46-3/8 20 13-1/2 8 40 3 or 4 123
GVRL-40 300/301 67 .62 40 40,000/36,000 41 2 51-1/2 47-3/4 22 13 8 41 3 or 4 147
Recovery capacity based on actual performance tests.
Water Connections – 3/4” on all models.
For 10-Year Tank and 6-Year Parts Warranty, change “G” to “X” in Model Number (example: XVR-40).
Heat Trap Nipples are factory-installed on all models.
GVRL-30 is only available in LP Gas.
SERIES
FIRST
HOUR
RATING
(GAL)
ENERGY
FACTOR
GALLON
CAPACITY
Flammable Vapor Ignition
BTU
INPUT
PER HOUR
NAT/LP
RECOVERY
90°F RISE
GALLONS
PER HOUR
FOAM
THICKNESS
(INCHES)
DIMENSIONS IN INCHES
A B C D E F
ANODE ROD*
HOT
CONNECTION
DRAFT
HOOD
OUTLET
APPROXIMATE
SHIPPING
WEIGHT
Resistant (FVIR) Water Heaters
A. O. Smith FVIR design meets or exceeds the American National Standards Institute standards
(ANSI Z21.10.1 - CSA 4.1) that deal with the accidental or unintended ignition of flammable
vapors, such as those emitted by gasoline.
Feature a sealed combustion chamber with air intake filter and a flame arrestor built into the
water heater base. In addition, a thermal cutoff (TCO) device, is designed to shut off gas flow to
the burner and pilot if poor combustion is detected.
E
C
COLD
CONNECTION
(LBS)
VALVE
A
B
1/2" GAS
CONNECTION
D
If flammable vapors accidentally enter the
combustion chamber, the arrestor is designed
so flames burn off the top surface and cannot
escape down through the arrestor.
A. Industry standard Thermopile
B. Large View Port for easy burner inspection
C. 360° Combustion Air Filter
D. Thermal Cutoff (TCO) with manual reset
For Technical Information and Automated Fax Service, call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
A. O. Smith Corporation • 500 Tennessee Waltz Parkway • Ashland City, TN 37015 • 800-527-1953 Toll-free USA
*Location for optional top-mounted
T&P Valve if ordered from factory.
Maximum Hydrostatic
Working Pressure: 150 PSI
www.hotwater.com Revised September 2014
F
Page 2 of 2
AOSRG45351