®
Residential Gas Water Heaters
FEATURES
INTELLIGENT CONTROL LOGIC
The internal microprocessor provides enhanced operating parameters and tighter differentials for
precise sensing and faster heating response to optimize performance.
SELF-POWERED ELECTRONIC GAS VALVE
Uses a thermopile to generate the power needed to operate the electronic gas control without
requiring an external power source.
DIAGNOSTICS
The electronic gas control incorporates an LED status indicator that monitors system operation
& service diagnostics.
®
DYNACLEAN™ DIFFUSER DIP TUBE
Helps reduce lime and sediment buildup, maximizes hot water output. Made from
long-lasting PEX cross-linked polymer.
“ENVIRONMENTALLY-FRIENDLY” 2 INCH NON-CFC FOAM INSULATION
IMPROVES EFFICIENCY
COREGARD™ ANODE ROD
An A. O. Smith exclusive. Aluminum anode has stainless steel core, protects tank
against corrosion.
PUSH-BUTTON PIEZO IGNITOR
Makes lighting pilot fast and easy with one-hand push-button spark ignition.
DURABLE, TAMPER-RESISTANT BRASS DRAIN VALV E
®
BLUE DIAMOND
Provides superior corrosion resistance to industry-standard glass lining.
GLASS COATING
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
Top-mounted T&P relief valve available as option on all models.
DESIGN-CERTIFIED BY CSA INTERNATIONAL
According to ANSI Z21.10.1 - CSA 4.1 Standards governing storage-type water heaters.
FLAMMABLE VAPOUR IGNITION RESISTANT COMPLIANT DESIGN
See other side.
CODES AND STANDARDS
These models meet the requirements of the BC Energy Efficiency Act.
8-YEAR LIMITED TANK and 6-YEAR PARTS WARRANTY
For complete information, consult written warranty or A. O. Smith Water
Products Company.
SERIES 300/301
January 2013
Page 1 of 2
CANRG45351
®
ResidentialGas Water Heaters
SERIES 300/301
DIMENSIONS IN INCHES
MODEL
NUMBER
SERIES
FIRST
HOUR
RATING
GALLONS
ENERGY
FACTOR
GALLON
CAPA CITY
BTU
INPUT
PER HOUR
NATURAL
RECOVERY
90ºF RISE
GALLONS
†
PER HOUR
FOAM
THICKNESS
(INCHES)
A B C D E F
TALL MODELS
GVR-40
GVR-50
300/301
300/301
88
40,000 41 270 .6240
50.62 22
40,000
41
58-1/461-3/4
57-1/4
612
20
13
13
8
8
SHORT MODEL
GVRL-40
Recovery capacity based on actual performance tests.
Water Connections – 3/4" on all models.
† Propane Gas – 37,000 BTU input for 50 gallon models, 36,000 BTU for 40 gallon models and 32,000 BTU input for 30 gallon models.
Heat Trap Nipples are factory-installed on all models.
300/301
67
40.62
40,000
41
51-1/2
2
47-3/4
22
13
ANODE ROD*
HOT
CONNECTION
8
Flammable Vapour Ignition
Resistant (FVIR) Water Heaters
A. O. Smith FVIR design meets or exceeds the American National Standards Institute standards
(ANSI Z21.10.1 - CSA 4.1) that deal with the accidental or unintended ignition of
flammable vapors, such as those emitted by gasoline.
Feature a sealed combustion chamber with air intake filter and a flame arrestor built
into the water heater base. In addition, a thermal cutoff (TCO) device, is designed
to shut off gas flow to the burner and pilot if poor combustion is detected.
51-3/4
50-1/4
41
DRAFT
HOOD
APPROXIMATE
SHIPPING
OUTLET
3 or 4
3 or 4 165
3 or 4
COLD
CONNECTION
E
C
WEIGHT
(LBS)
150
147
If flammable vapors accidentally enter the
combustion chamber, the arrestor is designed
so flames burn off the top surface and can not
escape down through the arrestor.
For Technical Information, call 1-888-479-8324. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
January 2013
www.hotwatercanada.ca
VALV E
B
1/2" GAS
CONNECTION
D
*Location for optional top-mounted
T&P Valve if ordered from factory.
Maximum Hydrostatic Working Pressure: 150 PSI.
A. Industry standard thermopile
B. Large View Port for easy burner inspection
0
C. 360
combustion air filter
D. Thermal Cutoff (TCO) with manual reset
F
Page 2 of 2
CANRG45351
A