Version Release Date Revision Instructions TPV Model
A00 July.-10-2006 Initial Release E565VNNKC3PRTM
2
15’’ LCD TV Color Monitor Protron PLTV-1530A
1. Monitor Specifications
Feature
Items Specification
15'' screen
XGA ( 1024 x 768 ) Resolution
LCD Panel
TV Function
DPF function
(Optional)
Wireless earphone
(Optional)
Video Inputs
Screen Size
Aspect Ratio 4 : 3
Resolution 1024x768(XGA)
Display Area (opening) H x V 304.128mmx228.096mm
Pixel Pitch 0.297mm x 0.297mm
Display colors 16.7 million
Lamp Type/ Life 50000 hr
Color Temperature Cool / Warm
TV Standard NTSC, PAL-M, PAL-N
Sound systems
Color systems NTSC, PAL-M, PAL-N
Supported by memory card Not supported
FM transmission frequency Not supported
AV、 S-VIDEO
Signal Input Analog: D-Sub 15 pin (detachable cable)
15'' screen
MTS、SAP
RCA x 1
Audio L/R x 1 (Share)
S-Video x 1
PnP compatibility DDC 2B
PC Input
Audio Output Audio Output: L / R
OSD language English / French / Spanish / Portuguese
Table Stand Included
Wall Mount VESA 100 x 100 mm
Power
Panel Tilt Forwards/Backwards -5°~15 °
Environment
Dimension W x H x D (with stand) 371.5 x 353 x 147(mm)
Input frequency
Recommended Analog: 1024x 768 (60Hz)
Input Audio A V (Share)
Power Supply AC100V~240V, 50/60Hz
Power Consumption <50W
operating + 0 °C ~ + 40 °C
storage - 25 °C ~ + 60 °C
operating 10% ~ 85%
Analog:FH:31.5KHz to 60KHz
FV:56Hz to75Hz
Speaker (built-in): Two 2 watt speakers
Headphone Mini-jack for stereo (3.5ø)
Weight (net) Kg (w/o Accessories) 3.5 Kg
Accessories
Remote Controller, Batteries (AAAx2), AC Power Cord, Adapter, User’s Manual, Signal
Cable, Audio Cable
3
15’’ LCD TV Color Monitor Protron PLTV-1530A
2. Operations Instructions
2.1 The Use of Remote Control
POWER
Press to turn on/off the TV. The TV
is never completely powered off
unless it is physically unplugged.
0~9/100 Digit buttons
Press to select a TV channel.
CH
Press
through the TV channels, which are
not erased. To view a blocked
channel, use the digital buttons to
access,the channel and enter your
access code.
VOL
Press + or – to adjust the volume.
PC
Press to select your input source to
PC.
SLEEP
With this key you can set a time
period after which the TV should
switch itself to standby. Press the
key repeatedly to select the
number of minutes. The counter
runs from 30, 60, 90, 120 minutes.
PIP
Not Supported.
POP
Not Supported.
or (or) to brows
MENU
Press repeatedly to display
OSD menu.
V-CHIP
Press this button to setup
parental control.
MUTE
Temporarily interrupt the sound
or restore it.
DISPLAY
Press this button to Display
Channel number on the right-top
corner.
PRE-CH
To display the previously
selected TV channel.
TV/VIDEO
Select your input source: press
repeatedly to select TV, AV,
S-VIDEO.
MTS /SAP
Press this key to activate
Multichannel Television Sound,
Stereo or Mono.
CAPTION
Press this button to turn Closed
Caption on. Be sure you have
selected Caption On in the Setup
menu.
SIZE
Not Supported.
SWAP
Not Supported.
4
15’’ LCD TV Color Monitor Protron PLTV-1530A
2.2 Front Panel Control Knobs
Power Key⑦ : Press to turn on or off the TV.
MENU Key⑥ : Press to show the OSD menu and exit OSD menu at the TV.
Down / Up Key⑤④ : Press to perform select function and channel.
- / + Key②③ : Press to confirm your function selection and adjustment and volume control.
Source Key① : Press to select your input source.
2.3 OSD Operations
How to use the Menu:
1. Press the MENU button to display each menu
2. Use the cursor up/down to select a menu item.
3. Use the cursor left/right to enter a submenu or enable/disable the function.
4. Press the MENU button to exit the menu.
Main Menu:
Press the MENU button into the main OSD (On Screen Display). Adjust item include PC SETUP, SOUND SETUP,
OSD SETUP, TV SETUP and PICTURE SETUP.
PC Setup
1. Contrast, Brightness, Phase, Clock, H-Position, V-Position and Color are the functions for.
2. Auto Adjustment is the function auto-sizing for VGA input.
3. Color temper ature you may select or adjust color temperature (warm and cold) as you need.
5
15’’ LCD TV Color Monitor Protron PLTV-1530A
When color temperature is set to “user defined”, press the menu button, you can set your favorite color by adjusting
the red, green, or blue one.
The “Reset To Default” is user-defined and is only used to reset the red, green, blue back to the default value.
4. Reset To Default is used to reset all settings to default value.
Note: All the “Reset to Default” functions are the same except those in menus set by the user, which can reset all
settings to default value in all menus.
SOUND Setup
1. Volume is adjusted from 0 to 100.
2. Bass and Treble are adjusted from 0 to 100.
You can adjust picture Volume, Bass and Tre ble to the levels you prefer.
3. The adjustment range of balance is from 0 to 100.
0 to 50 is used to adjust the volume of right speaker from low to loud.
50 to 100 is used to adjust the volume of left speaker from loud to low.
4. The Mute is “ON” or “OFF”, and if the Mute is ON, there are no sound output
OSD Setup
6
15’’ LCD TV Color Monitor Protron PLTV-1530A
1. Set OSD language
2. Adjust the horizontal position of the OSD.
3. Adjust the vertical position of the OSD.
4. Adjust the OSD time-out.
5. OSD Background Adjustment
6. Show the resolution, H/V frequency and input port of current input timing.
Do not execute reset, return to main menu.
(Note: This item is available only in PC mode)
TV Setup
1. AIR/CATV for different TV input solution, RF and cable.
2. Auto searching is used for searching all TV program channels. After finishing search and exiting, the machine
will save the program automatically, you can also press “menu” to break the searching, but only the searched
programs are saved when the machine exits searching.
3. Add/Erase is for add or delete the current channel for memorizes.
4. Current Program is display the current channel number。
5. Sleep Timer
It is for set a time period after which the TV should switch itself to standby. The counter runs from Disabled 30 > 60
> 90 > 120 minutes. (The setting will be removed when using reset)
6. CLOSED CAPTION
It’s allows you to read the dialogue of television programs on the TV screen. Designed to help the hearing
impaired, this feature uses on screen “ text boxes” to show dialogue and conversations wile the TV program is in
progress. Captions will appear on the screen only during captioned broadcasts.
Remark: the captions do not always use correct spelling and grammar.
Not all TV programs and product commercials are made for broadcast with Closed Caption information included.
7
15’’ LCD TV Color Monitor Protron PLTV-1530A
Refer to your area’s TV program listings for the TV channels and times of closed Caption shows.
The captioned programs are usually noted in the TV listings with serviceMarks such as “CC”.
Caption Mode: CC1~CC4
Dialogue (and descriptions) for the action on the captioned TV program shows on screen.
Text Mode: TT1~TT4
Often used for channel guide, schedules, bulletin board information for Closed Caption programs, news, weather
information or stock marker reports.
Not all Closed Caption modes are necessarily being use by a TV channel during the transmission of a Closed
Caption program.
V-CHIP Setup
Select V-Chip on OSD then enter 4 digits of pin number.
Initial pin number is “0000”.
If you enter an incorrect pin number “Error” message will be displayed.
It is the parental control function (V-chip). It is used to block program viewing based on the ratings by the
broadcaster. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of
program and by the categories chosen be blocked. It is also possible to block all program viewing for a time period.
A. There are two item could be defined. One is TV Guidelines another one is Movie Guidelines.
B. Setting up TV Guidelines
Use Up/Down arrow buttons to move around the matrix and press Right arrow button to change the value form
“U” to “B” or ”B” to ”U”
U: Unblock
B: Block
8
15’’ LCD TV Color Monitor Protron PLTV-1530A
C. Setting up Movie Guidelines
Use Up/Down arrow buttons to move around the matrix and press Right arrow button to change the value from
“U” to ‘B” or “B” to “U”
D. CHANGE PIN Personal Identification Number is for change password to control the Vchip setup; it’s included
three steps. ENTER PIN to enable this function, then ENTER NEW PIN to change a new one. After that
COMFIRM NEW PIN.
Picture Setup
1、 Contrast, Brightness and Saturation are adjusted from 0 to 100.
2、 Hue is adjusted from 0 to 100.
3、 Sharpness is adjusted from 0 to100.
Hue is only adjusted in NTSC telecast system.
You can adjust contrast, brightness, saturation, hue, black level and sharpness to the levels you prefer.
4、Color Tone is for AV 、S-VIDEO and TV color , you can select warm or cool.
9
15’’ LCD TV Color Monitor Protron PLTV-1530A
3. Input/Output Interface
Remove the back plate at the back of the TV as shown on the illustration opposite. Lay the LCD TV with the scre en
down on a table, as it will be easier to connect your peripheral equipment. Please take precaution not to damage the
screen.
①: RF TV port
: Earphone output port②
③: Right channel input port
④: Left channel input port
: A V video port⑤
: PC signal port⑥
: 12V power input port⑦
: S⑧-VIDEO video port
3.1 Connecting description
VIDEO RECORDER
How to connect:
1. Connect the supplied antenna cable to the RF IN port of your VCR.
2. Connect another RF cable ① from the output RF of your VCR to the input of your TV. Better quality when
playing from your VCR can be obtained if you also connect the Video, Audio LEFT AND right (only for stere o
equipment) cables ⑤ to the VIDEO, AUDIO L and R inputs AV.
If your VCR has an S-VHS video jack:
For improved picture quality, connect a S-Video cable with the S-VIDEO input on the TV instead of connecting the
VCR to the VIDEO port.
S-Video does not provide audio, audio cables must still be connected to provide sound③④.
Watching VCR
1. If you use connection①, select the TV channel search.
2. If you use connection⑤, select AV.
3. If you use connection⑧. Select s-video
4. Insert videotape in the VCR and press the PLAY button.
DVD PLAYER
Connect the video output port of DVD player to the video input port of TV.
Connect the left and right channels of DVD to the left and right channels of audio input of TV.
If your DVD player is equipped with S-VHS video port:
For better quality picture, please connect the S port to the S input port of TV. Connecting the audio output ⑧
ports through audio cable is a must since S port is not attached with audio③④
How to play
If you use connection , please select video AV input; ⑤
If you use connection , please select S⑧-VIDEO input;
10
15’’ LCD TV Color Monitor Protron PLTV-1530A
CAMERA, CAMCORDER, VIDEO GAME SET …
DIGITAL CAMERA
How to connect
1. Connect your digital camera, camcorder, videogame set… to VIDEO port ⑤ AUDIO R ③ AUDIO L ④ for mono
equipment.
2. S-VHS quality with an S-VHS camcorder is obtained by connecting the
How to use
1. Select AV or S-VIDEO.
2. Turn on the external AV equipment.
HEADPHONE
1. Insert the plug into the headphone port ②, when insert headphone will block speaker audio output.
2. Press the
3. Press the cursor lift/right to adjust the volume.
TIPS
Care of the screen
key on the remote control to switch off the sound from the headphone and the internal loudspeakers of the TV.
Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently.
Unplug the screen before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean
cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol
cleaners.
Mobile telephone warning
To avoid disturbances in picture and sound, malfunctioning of your TV or even damage to the TV, keep away your
mobile telephone from the TV.
End of life directives
We are paying a lot of attention to produce environment ally friendly in green focal areas. Your new receiver contains
materials which can be recycled and reused.
At the end of its life specialized companies can dismantle the discarded receiver to concentrate the reusable
materials and to minimize the amount of materials to be disposed of.
Please ensure you dispose of your old receiver according to local regulations.
11
15’’ LCD TV Color Monitor Protron PLTV-1530A
4. Mechanical Instructions
Step Figure Description
Lay the LCD-TV
Preparation
on a flat, soft and
clean surface.
Remove
the stand
Reverse the
monitor
Remove the two
screws on the
stand to remove
the stand.
Reverse the
monitor to turn
the front panel
facing us.
12
15’’ LCD TV Color Monitor Protron PLTV-1530A
Remove the
Bezel and
the shield.
Remove the
screws marked in
red and
disconnect the
connectors
marked in yellow
to remove the
bezel, and then
remove the
shield marked in
blue.
13
15’’ LCD TV Color Monitor Protron PLTV-1530A
Remove the
main frame.
Remove the four
screws marked in
red, disconnect
the connector
marked in blue,
and then remove
the main frame.
14
15’’ LCD TV Color Monitor Protron PLTV-1530A
Remove the
insulation
piece
Remove the
Boards.
Remove the
screw marked in
red to remove the
insulation piece.
Remove the
eight screws
marked in red to
remove the
boards.
15
15’’ LCD TV Color Monitor Protron PLTV-1530A
5. Repair Flow Chart
Defect Mode Failure Analysis Repair Testing
Abnormal
Display
Missing Line
Bright Dot
Dark Dot
Light Leakage
Mura
Image Stickin g
Dot Defect
Brightness Spot
Dot Defect
Particle
No display Check Power Board
Check Panel
Panel Change
Change Power Board
A
Noise
Check Main board
Check Panel
Check Keyboard
Check Line Connected
Power board and Minored
Check Main board
Check Panel
Next Step
Change Main board
Change Panel
Change Keyboard
Change Wires
Change Main board
Change Panel
Test
NG
Completed
16
15’’ LCD TV Color Monitor Protron PLTV-1530A
A
Noise Check Single Cable Change Single Cable
Flicker Check Main board Change Main board
Change Panel
Change Main board
Change Panel
Change LVD Cable
Change Panel
Abnormal
Gray
R\G\B
Display
Abnormal
Check Panel
Check Main board
Check Panel
Check LVD Cable
Check Single Cable Change Single Cable
Check Main board Change Main board
Check Panel
Monitor
Shut Down
No signal Check Single Cable Change Single Cable
Power on
Display
Abnormal
Check Power board Change Power board
Check Main board
Check Keyboard Change Keyboard
Check Main board
Check Main board
Change Main board
Change Main board
Change Main board
Next Step
Test
A
Completed
17
15’’ LCD TV Color Monitor Protron PLTV-1530A
A
LED Display
Abnormal
Abnormal
Keyboard
Abnormal
OSD
LED Off
LED Dark
LED Abnormal
LED Flicker
Check Wires
Check Main board
(DDC) U301 Rd
Check Keyboard
Check Main board
Change Keyboard or
Main board or wire
Change Keyboard or
Main board
Change Keyboard or
Main board or wire
Change Keyboard or
Main board or wire
Change Wires
Change Main board
Change Keyboard
Change Main board
Check LVDS Wire
Change LVDS Wire
Next Step
Test
Completed
18
Loading...
+ 41 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.