Page 1
Antari Material Safety Data Sheet Page 1 of 6
Antari Material Safety Data Sheet Page 1 of 6
Material Safety Data Sheet
(Revision: 1.1)
Date Issued: August 3, 2015
Section 1: Product and Company Identification
Product Name
Stage, fog fluid
Trade Name
FLP-6
Product Type
Stage, security, theatre accessory
Manufacturer’s Name
Antari Lighting & Effects Ltd.
Manufacturer’s Address
No. 8, Lane 231, Sec 1, Nankan Road, Luzhu Dist., Taoyuan City 338, Taiwan (R.O.C.)
Telephone Number for Information
+866 33225829
Emergency Telephone Number
Jason Ho
+866 33225829 | jasonho@antari.com.tw
Section 2: Hazards Identification
Classification of the substance or mixture: Not a hazardous substance or mixture according to Regulation (EC) No.
1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements: The product does not need to be labeled in accordance with EC directives or respective national laws.
Other hazards: This substance/mixture contains no components considered to be either persistent, bio accumulative and
toxic (PBT), or very persistent and very bio accumulative (vPvB) at levels of 0.1% or higher.
Section 3: Composition / Information on Ingredients
Product Description: Compounding
Note: This is not a dangerous substance
CAS No.
Concentration
Propane-1, 2-diol
57-55-6
Proprietary
Glycerol
56-81-5
Proprietary
Distilled Water
7732-18-5
Proprietary
Section 4: First Aid Measures
Inhalation: Supply fresh air; consult doctor in case of complaint.
Skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Swallowing: If symptoms persist, consult doctor.
Page 2
Antari Material Safety Data Sheet Page 2 of 6
Antari Material Safety Data Sheet Page 2 of 6
Section 5: Fire-Fighting Measures
Suitable extinguishing agents: Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixture. No further relevant information available.
Protective equipment: Mouth respiratory protective device.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures. Mount respiratory protective device.
Environmental precautions:
• Dilute with plenty of water.
• Do not allow to enter sewers / surface or ground water.
Methods and material for containment and cleaning up:
• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Section 7: Handling & Storage
Handling:
• Precautions for safe handling: Keep receptacles tightly sealed.
• Information about protection against explosions and fires: Keep ignition sources away.
Storage:
• Requirements to be met by storerooms and receptacles: Store in a cool location.
• Information about storage in one common storage facility: Store away from foodstuffs.
Store away from flammable substances.
• Further information about storage conditions: Keep receptacle tightly sealed.
Page 3
Antari Material Safety Data Sheet Page 3 of 6
Antari Material Safety Data Sheet Page 3 of 6
Section 8: Exposure Controls / Personal Protection
Components with limit values that require monitoring at the workplace
56-81-5 Glycerol
PEL (USA)
15* 5** mg/m3 – *total dust **respirable fraction
TLV (USA)
10* ppm – *mist
EL (Canada)
10* 3** mg/m3 – *mist; **mist, respirable
EV (Canada)
10 mg/m3
EL (Mexico)
10 mg/m3 (i)
57-55-6 Propane-1, 2-diol
WEEL (USA)
10 mg/m3
EV (Canada)
155* 100** mg/ m3 , 50* ppm (*vapor and aerosol, ** aerosol only)
Additional information: The lists that were valid during the creation were used as basis.
Based on the composition shown in section 3, the following measures are suggested for occupational safety measure
PERSONAL PROTECTIVE EQUIPMENT
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be followed:
• Breathing equipment: Suitable respiratory protective device recommended.
• Protection of hands: The glove material has to be impermeable and resistant to the product / the substance / the
preparation. Due to missing tests no recommendation to the glove material can be given for the product / the
preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of
diffusion and the degradation
• Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further
marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked
prior to the application.
• Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the
protective gloves and has to be observed.
• Eye protection: Goggles recommended during refilling.
Page 4
Antari Material Safety Data Sheet Page 4 of 6
Antari Material Safety Data Sheet Page 4 of 6
Section 9: Physical and Chemical Properties
General Information
Form:
Liquid
Lower explosion limits:
Not available
Color:
Transparent
Upper explosion limits:
Not available
Odor:
Odorless
Vapor pressure:
Not available
Odor threshold:
Not available
Density:
Not available
pH value:
Not available
Relative density:
Not available
Melting point / range:
Not available
Vapor density:
Not available
Freezing point:
Not available
Evaporation density:
Not available
Boiling point / range:
Not available
Solubility in / miscibility with water:
Not available
Flash point:
Not available
Partition coefficient (n-octanol/water):
Not available
Flammability (solid/gaseous):
Not available
Dynamic viscosity:
Not available
Auto-ignition temperature:
Not available
Kinematic viscosity:
Not available
Decomposition temperature:
Not available
Section 10: Stability and Reactivity
Reactivity: No decomposition if used according to specifications.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.
Section 11: Toxicological Information
ACUTE TOXICITY
LD/LC50 values that are relevant for classification
56-81-5 glycerol
Oral
LD50
4090 mg/kg (mouse); 12600 mg/kg (rat)
Dermal
LD50
> 10000 mg/kg (rabbit)
57-55-6 propane-1, 2-diol
Oral
LD50
20000 mg/kg (rat)
Dermal
LD50
20800 mg/kg (rat)
• Primary irritant effect on the skin: Irritating effect possible
• Primary irritant effect on the eye: Irritating effect possible
• Sensitization: Sensitization possible through skin contact.
• Additional toxicological information: The product is not subject to classification according to internally approved
calculation methods for preparations: When used and handled according to specifications, the product does not have
any harmful effects according to our experience and the information provided to us.
Page 5
Antari Material Safety Data Sheet Page 5 of 6
Antari Material Safety Data Sheet Page 5 of 6
CARCINOGENIC CATEGORIES
IARC (International Agency for Research on Cancer)
None of the ingredients is listed
NTP (National Toxicology Program)
None of the ingredients is listed
Section 12: Ecological Information
Toxicity
• Aquatic toxicity: No further relevant information available.
• Persistence and degradability: No further relevant information available.
• Bioaccumulative potential: No further relevant information available.
• Mobility in soil: No further relevant information available.
Additional ecological information
General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water. Do not allow undiluted product or large
quantities of it to reach ground water, water course or sewage system.
Section 13: Disposal Considerations
Waste treatment methods
Recommendation: Smaller quantities can be disposed of with household waste.
Uncleaned packagings
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agent: Water, if necessary with cleansing agents.
Section 14: Transport Information
UN-Number
DOT, IMDG, IATA
Not available
Packaging Group
DOT, IMDG, IATA
Not available
UN Proper Shipping Name
DOT, IMDG, IATA
Not available
Marine Pollutant
No
Transport Hazard Class(es)
DOT, ADN, IMDG, IATA
Not available
Special Precautions for User
Not available
Class
–
Not available
EMS Number
MARPOL73/78, IBC Code
Not available
Page 6
Antari Material Safety Data Sheet Page 6 of 6
Antari Material Safety Data Sheet Page 6 of 6
Section 15: Regulatory Information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Section 355 (extremely hazardous substances):
None of the ingredients is listed
Section 313 (Specific toxic chemical listings):
None of the ingredients or substance are listed
TSCA (Toxic Substances Control Act):
All ingredients are listed
Proposition 65
Chemicals known to cause cancer:
None of the ingredients is listed
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed
Chemicals known to cause developmental toxicity:
None of the ingredients is listed
Cancerogenity categories
EPA (Environmental Protection Agency):
None of the ingredients is listed
TLV (Threshold Limit Value established by ACGIH):
None of the ingredients is listed
NIOSH-Ca (National Institute for Occupational Safety and Health):
None of the ingredients is listed
OSHA-Ca (Occupational Safety & Health Administration):
None of the ingredients is listed
Water hazard class:
Class 1 (self-assessment): slightly hazardous for
water
Section 16: Other Information
The contents and format of this MSDS/SDS are in accordance with 29 CFR 1910.1200(g).
DISCLAIMER OF LIABILITY
The information in this MSDS/SDS was obtained from sources which we believe are reliable. However, the information is
provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling,
storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons,
we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way
connected with the handling, storage, use or disposal of the product. This MSDS/SDS was prepared and is to be used only
for this product. If the product is used as a component in another product, this MSDS/SDS information may not be
applicable.
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
LC50: Lethal concentration, 50%
LD50: Lethal dose, 50%
Loading...