AngSi Technology PLAYSTEREO User Manual

Thank you for purchasing PLAYGROUND PlayStereo™ wireless speakers.
Before starting to use it, please read this user guide thoroughly.

What is included

Speakers x2

Lanyards x2

This user guide x1

Bases x2

USB data cables x2

Powering on and off

POWER ON: Press and hold the power button for two seconds and you’ll hear the power-on
greeting, while the RED LED LIGHT

will stay on for 3 seconds and and then BLUE LED

LIGHT start flashing quickly.

POWER OFF: Press and hold the power button for two seconds and you’ll hear the power-off

greeting, while the LED will stay on for 3 seconds and then go out.

Buttons, indicator light and ports

PlayStereo

™

Wireless Speakers

User Guide

Indicator light

Volume - Volume+

TF micro SD

card slot

Power button

USB port

Pair Stereo Speaker (as one pair or singly)

Speakers default to Bluetooth Stereo mode when both
powered on, you will hear “READY FOR PAIRING” as
reminder. This takes about 10 to 30 seconds; when
pairing is completed you will hear the speakers say,
“Left channel on Master speaker, Right channel
on other speaker”.

After they form a stereo pair, the indicator light on the
speaker the PURPLE LED LIGHT will flash on Master
speaker as Left Speaker; and the PURPLE LED LIGHT will
turn solid on other speaker as Right Speaker.

Bluetooth music playback

Tap to reduce volume

Tap

to increase volume

Tap

once to play / pause

Bluetooth mode (only works with a single speaker)

Press "POWER" key to turn on a single speaker, the "BLUE LED" will flash quickly on the single speaker;

A. From your iPhone, iPad, or iPod

Got to Setting > Bluetooth, check Bluetooth
is on, Select “PlayStereo xxx“ when it
appears under DEVICES (xxx: 3 characters

which are unique to your speaker)

The speaker will connect in a few seconds
The BLUE LED LIGHT will turn solid BLUE
on the single speaker. You can now play
your audio wirelessly to your PlayStereo.

B. From your Smartphone,Tablet & Mobile Devices

Got to Setting > Bluetooth, check Bluetooth is
on, Scan or Search and Select “PlayStereo xxx“
when it appears under AVAILABLE DEVICES

(xxx: 3 characters which are unique to your speaker)

The speaker will connect in a few seconds
The BLUE LED LIGHT will turn solid BLUE on
the single speaker. You can now play your audio
wirelessly to your PlayStereo.

SAFETY PRECAUTIONS

READ THE SAFETY PRECAUTIONS THOROUGHLY

DO NOT CLEAN USING LIQUID AND ABRASIVES

KEEP AWAY FROM HEAT

KEEP AWAY FROM FIRE

USE WITHIN RATED WATERPROOF RATED LEVELS ONLY

KEEP AWAY FROM SMOKE

DO NOT DROP WITHOUT PACKAGING

DO NOT CHARGE UNATTENDED OR WHILE SLEEPING

DO NOT DISASSEMBLE

PLEASE RECYCLE

Press and hold

for 2 seconds

to jump to last track

Press and hold

for 2 seconds

to jump to next track

Micro SD Card Mode (only works with a single speaker)

Press power button briefly twice, quickly to switch to Micro SD card mode;
if such a card has been inserted in the speaker, the speakers will say “TF Card
Source” as confirmation. If no card is inserted, the speakers will say
“no TF card, please insert”; if no card is inserted within 30 minutes,
the speakers will power off automatically. After entering this mode,
the speaker plays the tracks in the card in sequence. You may play /
pause, increase / decrease volume, and jump to the previous / next
tracks in the same way as Bluetooth mode, in Micro SD Card mode,
the RED LED

and BLUE LED will alternately flash.

Data Transfer (only when speaker is turned off)

To use the data transfer function, insert a Micro SD card and then
connect the supplied USB data cable to the speaker and computer, all
while the speaker is powered off; the speaker then functions as a card
reader and you can transfer data to and from the card to the computer.

Micro SD Card Mode only works with a single speaker; the speakers don’t
pair together in this mode.

USB Audio Mode (only works with a single speaker)

USB audio mode is skipped if no USB connection is
present; you would only switch between Bluetooth
(power-on default) and micro SD card modes.

If you use the bundled USB data cable to connect the
speaker to the computer, you may switch to USB audio
mode (again by double-tapping the power button). The
speaker will say “USB Audio Source” as confirmation.

The speaker can play sounds from the computer in real
time; volume up / down controls are available while play /
pause and previous / next track controls are unavailable.

USB audio mode only works with a single speaker; the
speakers don’t pair together in this mode, in USB Audio
mode, the Red LED and Blue LED will alternately flash.

Switching between the three modes

Press power button briefly twice, quickly to switch modes
(Power on default Bluetooth mode > Micro SD card mode > USB audio mode)

Charging

Indicator light flashes RED when battery is low

When battery is low, please charge the speakers in time.

Use the supplied USB data cable to connect the speaker to a USB port or a
dedicated 5V USB power supply. The indicator lights up SOLID RED while charging
and goes out when the speaker is fully charged. Charging takes approx. 2.5 hours.

Technical specifications

Bluetooth version: v4.2

Effective distance: 10m

Supported audio protocols: A2DP, AVRCP

Charging function: compatible with USB ports and dedicated DC 5V USB power supplies

Play time: about 8 hours (playing music continuously at comfortable volume)

Speaker power rating: 3W

Speaker impedance: 4Ω

Frequency response: 100Hz-20kHz

Dimensions: 86x86x45mm

Weight: approx. 210g

Operating temperature: -10°C to +40°C

1 year Limited Warranty to original end-user purchaser.

To obtain warranty service, visit www.playground-products.com/warranty

Note: The stereo pairing occurs automatically; if it doesn’t happen within 3 minutes of powering on

both speakers, you may turn them off and on again to try again.

After the speakers form a stereo pair, only Bluetooth mode is available (double tapping power

button has no effect); turning off one speaker turns the other off automatically.

Pair & Connect your mobile to PlayStereo Speaker (as Stereo Paired Speaker)

A. From your iPhone, iPad, or iPod

Got to Setting > Bluetooth, check Bluetooth
is on, Select “PlayStereo xxx“ when it
appears under DEVICES (xxx: 3 characters

which are unique to your speaker)

The speaker will connect in a few seconds
The PURPLE LED LIGHT will turn solid
PURPLE. You can now play your audio
wirelessly to your PlayStereo.

B. From your Smartphone,Tablet & Mobile Devices

Got to Setting > Bluetooth, check Bluetooth is
on, Scan or Search and Select “PlayStereo xxx“
when it appears under AVAILABLE DEVICES

(xxx: 3 characters which are unique to your speaker)

The speaker will connect in a few seconds
The PURPLE LED LIGHT will turn solid PURPLE
You can now play your audio wirelessly to your
PlayStereo.