AngSi Technology ANGLE3PLUS Quick Start Guide
Ultra-Portable Bluetooth Speaker
Quick Start Guide
Designed and Engineered By
TheOontZ.com
Table of Contents
In the Package
Play Controls
Lights and Connectors
Charging the Battery
Battery Features
Turning On and Off
Pair & Connect - Step 1
Pair & Connect - Step 2 --
-- From Your From Your iPhone, iPad, Smartphone, Tablet and Mobile Devices
-- From Your Apple Mac or Windows Laptop/Computer
-- From Your Amazon Echo Dot
Playing From Non-Bluetooth Audio Source Devices Using the 3.5mm Audio Cable
IPX5 Water Resistant
Wireless Hands Free Personal Speakerphone
Troubleshooting
Resetting Your OontZ Angle 3 PLUS
Customer Support
Safety and Precautions
Pages
1
2
3
4 - 5
6
7
8
9
9
10 - 11
12
13
14
15 - 19
20
21
21 - 22
In the Package
The
Quick Start Guide
Micro USB Charging Cable
3.5mm Audio Cable
Note: The Micro USB Charging Cable and the 3.5mm Audio
Cable are packed below the cardboard insert in the box.
Slide out the cardboard insert to locate the cables.
Page 1
Play Controls
Bluetooth Button (Dual Function)
Track Back
Press and Release to go to the beginning
of the current track. Press and Release a
Play/Pause
Press and Release to Pause/Play
Track Forward
Press and Release to play next track
second time to play previous track
Volume Down
Press to decrease volume
Note:
- Make sure the volume level is set high on your audio source device. The volume on the OontZ Angle 3 PLUS and your audio source device both need to
be set to the highest level for the loudest volume. The volume controls on your audio source device and the speaker work independently of each other.
- Some apps may not support track back, track forward, or play/pause
Power Button
Volume Up
Press to increase volume
Page 2
Lights and Connectors
Built-in Mic for Speakerphone
Blue Light when speaker is on:
- flashing Blue speaker is in pairing mode
- solid Blue speaker is connected
Red Light when charging:
- slowly flashing Red charging
- solid Red fully charged
Rubber Flap
pull gently from the top
AUX IN Jack
located under rubber flap
Micro USB Charging Connector
located under rubber flap
Note: The rubber flap needs to be closed
to keep the speaker water resistant
Page 3
Charging the Battery
The rechargeable battery comes
with a partial charge and the
speaker is ready to play.
For maximum playtime,
fully charge the battery.
You can play while
charging.
Red Light when charging:
- slowly flashing Red indicates battery is charging
- solid Red indicates battery is fully charged
To charge the battery:
Step 1: Pull down the rubber flap from the top
to access the Micro USB Charging Connector.
Step 2: Insert the smaller end of the Micro
USB Charging Cable into the Micro USB
Charging Connector as shown.
Step 3: Insert the other end of the Micro USB
Charging cable into either a USB wall charger
for a Smartphone or iPhone, or a USB port on
your laptop/computer to charge the battery
(see illustrations on page 5).
Charging Time:
Up to 8 hours to fully charge a low battery.
Page 4
Charging the Battery (continued)
Insert the larger end of the Micro USB charging cable into either a USB wall charger for a Smartphone or iPhone
(a USB wall charger that is 5V 1.0A up to 5V 2.4A maximum) or a USB port on your laptop/computer to charge the
OontZ Angle 3 PLUS battery.
Page 5
Battery Features
You can play the OontZ Angle 3 PLUS while it is charging.
Power Saving Feature
- When playing from battery power the OontZ
Angle 3 PLUS will turn off after 15 minutes of not
playing audio to conserve the battery charge. *
- When plugged into a charging source the
OontZ Angle 3 PLUS will remain on until you
turn the power off. You can continue to
keep the speaker plugged into a charging
source even when it is fully charged.
Low Charge Remaining
When the battery charge has less
than 15% remaining the
will begin flashing. The volume
will decrease to preserve the
remaining battery charge.
Red Light
*Exception: when connected to an Amazon Echo Dot, the power saving feature is disabled and the speaker will remain on.
Page 6
Loading...