Smart Vu LE - Ref. SVU200
QUICK START GUIDE
Thank you for choosing Analog Way and the Smart Vu LE. By following these simple steps, you should be
able to setup and use your powerfull scaler/switcher within minutes. Discover the Smart Vu LE extensive
capabilities and intuitive interface while conguring your rst show, and unleash your creativity for a new
experience in show and event management by Analog Way.
What’s in the box
1 x Smart Vu LE seamless scaler/switcher
1 x Power supply cord
1 x HD15 to 5 BNC cable
1 x Ethernet crossover cable
1 x Set of 3 audio 5 pin screw terminals
1 x RCS CD-ROM (PC only)
4 x M4x12mm screws
1 x User manual (PDF version)*
1 x Quick Start Guide (PDF version)*
* Download on our website: www.analogway.com/
If required, front handles of the device can be dismantled,
but with caution.
The original screws removed must not be reintroduced to
their location without handles in place.
Substantial damages can occur, including risk of electric
shock from the mains voltage.
WARNING!
Only M4x12mm screws can be used.
(They are supplied with the unit)
Smart Vu LE Overview
The Smart Vu LE front panel is comprised of several sections, each carefully labeled and self explanatory,
corresponding to all of the machine’s versatile functions.
The STANDBY button (1) will allow users to turn the device on and off once the main outlet switch (11) is
turned on. The menu screen (2), Control section (3), and menu scroll knob (4) will give users access to the
Smart Vu LE menu. The Input Selection section (5), determines which of the 6 available input sources will be
used. The CUT and FADE buttons (6 and 7), are front panel shortcuts to the transitions available in the Layer
menu of the Smart Vu LE. The FREEZE button (8) allows users to take a snapshot of the displayed image,
and the PRESET button (9) is a shortcut to the Smart Vu LE menu Presets function. The TAKE button (10)
of the Smart Vu LE will let you take a selected source to the Main output. The rear panel of the Smart Vu LE
will let you connect all of your input sources and outputs to the device. Plug universal analog sources (14) or
DVI-I sources (15), audio inputs and outputs (17 and 18), and a remote controller to the IP/LAN connector
(13) of your Smart Vu LE.
WORKING WITH THE SMART VU LE
Setting up the Smar tVu LE
The following setup is an example of a typical Smart Vu LE conguration for an event or roadshow, but can
of course be modied according to your specic needs:
Connect all of your sources (PC, video camera, streaming server, DVD player...) to the appropriate input
connectors at the rear of the unit (see “The SmartVu LE rear panel” into the User Manual).
Connect your main output to the video projector for audience viewing, and your preview output to a monitor
for preview purposes (see “Connecting the SmartVu LE”, into the User Manual). Turn all input and output
devices on.
Connect the supplied AC power cord to the unit, then connect the other end of the cord to a grounded AC
outlet. Power up the SmartVu LE by pressing the I/0 button at the rear of the unit, and wait for the menu to
run its startup sequence. The unit is on and ready to function when the System Menu appears on your VFD
screen.
Input & Output conguration
1/ In the menu section, press the EXIT/MENU button and select Input
in the menu by rotating the selection knob and press the ENTER
button to enter the Input sub-menu.
2/ Select Auto Setting and press enter to automatically congure the
inputs plugged into the Smart Vu LE. The device will set all input
resolutions and frequencies to match the input sources plugged to
the device.
3/ Alternatively, you can congure all inputs of the Smart Vu LE
individually, by navigating to the Input menu and setting each input
accordingly.
Once your inputs have all been congured, the output settings of
the Smart Vu LE must be set according to the machines plugged
on your Smart Vu LE Main and Preview outputs (video projector,
preview monitor...).
1/ In the menu section, press the EXIT/MENU button and select
Output in the menu by rotating the selection knob. Enter the Output
sub-menu and select the output type, resolution and frequency, so
that they match the viewing hardware plugged into the unit.
2/ Press the ENTER button to enter each of the desired output
parameters.
Your Smart Vu LE is now set up and ready to work with.
SmartVu LE layers
The Smart Vu LE offers only one type of layer to work with: Live
Background. To work with a live background, simply select a live
input source (1-5) from the Input Selection section of the Smart Vu
LE. The selected button will start to blink. Press the TAKE button to
view the results on your Main output.
It is possible to add an opening and closing transition type to your
live layer.
To parameter transitions for live layer, proceed as follows:
1/ In the Input Selection section, press the source button you wish to
add a transition effect to. The button will start blinking.
2/ Press the CUT button if you wish to have a cut transition when
you go live with your layer, or press the FADE button if you wish your
layer to fade. In the Menu section, set the duration of the fade if a
fade transition is what you have chosen.
3/ Press the TAKE button to view the results on screen.
It is possible to make a “snapshot” of a live source by pressing the
FREEZE button at any stage. The SmartVu LE will record a still
frame from the live image on your output.
Using Presets
It is possible to build up to 4 presets from any layer, then re-use it at
any moment.
To create and use a Preset, proceed as follows:
1/ In the Input Selection section, press the source button you wish to
add a transition effect to. Adjust all the desired image and/or transition
effects of your layer.
2/ Press the PRESET button, or, in the Menu section, navigate to the
Preset menu and press ENTER.
or
3/ In the Menu section, select an empty preset to store your layer and
its effects into, then press ENTER.
4/ To recall a preset, press the PRESET button, then one of the 4
preset buttons (Input selection) and press TAKE.
Warranty
This Analog Way product has a 3 year warranty on parts and labor,
back to factory. This warranty does not include faults resulting from
user negligence, special modications, electrical surges, mishandling
(drop/crush), and/or any other damage caused by misuse.
Going further with the SVU200
+ +
For complete details and operation procedures, please refer to the
Smart Vu LE User Manual and our website for further information:
www.analogway.com/
Version: 3.0 - 02/02/2012
Code: 140110
Loading...