Amped wireless B1900RT User Manual

SETUP GUIDE

v061217

READ FIRST

GOT QUESTIONS?

Phone: [phone] or 909-217-3168
Email: [e-mail]
Web: www.ampedwireless.com/support

B1900RT

AC1900 WI-FI

Watch the Installation Video here: http://support.ampedwireless.com/b1900rt

1

2

Disconnect & Power Off your Existing Router

(if available)

Disconnect your existing router from your computer, your
broadband modem, and a power outlet. If you do not have
an existing router please continue to Step 2.

Power Off your Modem

Power off the modem by disconnecting the modem’s power
adapter from the power outlet. If your modem has a backup
battery, remove the backup battery from your modem.

Do NOT power on your modem until Step 4.

®

ROUTER

Modem

Existing Router

Remove

Backup Battery

Modem

3

4

5

Connect the Router to your Modem

a

a

b

Modem

Router

b

Power On your Modem

Plug in the power adapter and reinsert the backup battery
(if available) to power on the modem.

Allow a minute or two for the modem to initiate.

Power On & Connect to the Router

Use the included Ethernet cable and connect
one end of the cable to your modem.

Connect the other end of the cable to the blue

Modem

port on the Router.

Do NOT connect the power adapter to the
Router at this time.

Reinsert

Backup Battery

Modem

6

a

Open your Web Browser

Amped Wireless

http://setup.ampedwireless.com

Recommended browsers: Google Chrome, Safari or

Internet Explorer (8.0 and up). Do not use Firefox.

ACCESSING THE WEB MENU DOES NOT REQUIRE INTERNET ACCESS. THE MENU IS SERVED FROM THE ROUTER.

a

b

- or -

Attach the Power Adapter to the Router’s

PWR

port and a power outlet.

b

Connect your tablet, smart phone or PC to the
Router's Wi-Fi network: Amped_B1900RT
Security key: wireless

(see back for detailed instructions)

- or ­Connect an Ethernet cable between your PC and
a green wired port on the back of the Router.

Enter the setup web address into your browser:

http://setup.ampedwireless.com

If the URL fails to open, then try: http://192.168.3.1

7

If you have problems accessing the web menu...

Disable third-party firewalls, such as North, ZoneAlarm, or Windows Defender.

Disconnect from all wireless networks and use a wired connection to the Router. Try again.

Welcome to the Setup Wizard

Welcome

to the B1900R T Setup

Begin Setup

Skip & manually configure

Setup screens for mobile devices will vary from desktop and tablet versions.

If this is your first time setting up the Router, the
Setup Wizard should automatically load.

Click Begin Setup to continue.

If you wish to manually configure your Router, you can skip the
Setup Wizard.

If the Dashboard loads, scroll to the
bottom and click the Setup Wizard
button to access the wizard.

Double check that the modem is connected to the
Router's Modem port.

8

Click Next to continue.

Internet Connection Detection

The Wizard will try to detect your Internet settings and
configure the Router. Please be patient.

If there is a problem with your Internet connection
or if your Internet provider requires that you log in
before accessing the Internet, a prompt will appear
notifying you of the issue.

Once your Wizard has configured your Internet
settings, you should see a green check mark.

9

Click Next to continue.

Personalize your Wi-Fi Settings

The default IDs of your 5GHz and 2.4GHz Wi-Fi
networks are: Amped_B1900RT_5.0 and

Amped_B1900RT_2.4

Enter a new name in the SSID fields. Users connecting
wirelessly to the Router will use these IDs to identify
your Wi-Fi networks.

The default Security Key of your Wi-Fi networks is:

wireless

Enter a new key for both the 5GHz and 2.4GHz Wi-Fi

networks in the Security Key fields. The keys must be at
least 8 characters long.

Create a Password for your Router

10

This password is NOT your Wi-Fi connection password.
This password is to access the web menu of the Router
to access additional settings. Leave this blank if you do
not wish to have a password. However, we recommend
creating a password at this time for security purposes.

Click Apply to save your settings. The Router will reboot.
This process may take up to 1 minute. The page will
automatically reload after the countdown. If it does not,
you may need to refresh the page manually or check
your connection to the Router.

Setup Summary

Congratulations, the Router is now successfully config­ured and your settings are now saved. You may now
connect additional devices directly to the 3 wired ports
on the back panel, or connect wirelessly to the Router.

The wizard will notify you if there is a newer firmware for
the Router. We recommend that you upgrade your
Router at this time if an update is available.

F R E E T E C H N I C A L S U P P O R T

Dashboard

GOT QUESTIONS?

?

Phone: [phone] or 909-217-3168
Email: [e-mail]
Web: www.ampedwireless.com/support

Once you have completed the Setup Wizard, you will
now see the Dashboard when you access
http://setup.ampedwireless.com. You will not see the
Setup Wizard again. Through the Dashboard you can
further adjust settings and access the features of the
Router. Here you will find features like Guest Networks,
User Access Controls, Wi-Fi Coverage Controls, Parental
Controls and many other features.

v061217

This is the second page of the Setup Guide. Start on the opposite side first.

How to Connect Wirelessly to the Router

Windows 10

Access the taskbar on the bottom right of your
screen, tap on the Wi-Fi icon, enable Wi-Fi, and select

Amped_B1900RT_5.0 or Amped_B1900RT_2.4.

Amped_B1900RT...

Network01

Network02

Mac OS X

Click on the Wireless icon to see available wireless
networks. Select Amped_B1900RT_5.0 or

Amped_B1900RT_2.4.

Windows 8

Swipe in from the right edge to access the charms
bar, tap on Settings, select the Wi-Fi icon, and select

Amped_B1900RT_5.0 or Amped_B1900RT_2.4.

Amped_B1900...

iPhone

Tap on your Settings icon, select Wi-Fi, and
choose the network, Amped_B1900RT_5.0 or

Amped_B1900RT_2.4.

Amped_B1900RT...

iPad Tablet

Tap the "Home" button to get to the home page.

A.

Tap the "Settings" app icon.

B.

Tap on Wi-Fi to enter the iPad’s Wi-Fi settings.

C.

Toggle the Wi-Fi "On/Off" selector switch to "On".

D.

Under "Choose a Network," select: Amped_B1900RT_5.0

E .

or Amped_B1900RT_2.4

Android Tablet

Tap the "Apps" menu on the tablet screen.

A.

Locate and tap the "Settings" app icon.

B.

Under "Wireless & networks," tap "Wi-Fi settings".

C.

Tap the Wi-Fi box to turn on Wi-Fi and scan.

D.

Under "Wi-Fi networks," select: Amped_B1900RT_5.0

E.

or Amped_B1900RT_2.4

Amped_B1900RT...

Amped_B1900RT...

Amped_B1900RT...

Wi-Fi Protected Setup (One-Touch Setup or Push Button Configuration)

If your Wi-Fi device has WPS one-touch setup, you can use it to connect to the Router:

Hold down the WPS button on the Router (back panel) for 3 seconds. The Power LED will begin to blink.

A.

As it blinks, push the WPS button on your wireless adapter or enable WPS with the provided software for your

B.

wireless adapter. WPS will automatically configure the connection settings for your wireless adapter to connect
to the Router.

Using the Features on the Router

The Router is equipped with many powerful security features which can be accessed through the web
menu on the left side under Smart Features, Firewall Settings and Quality of Service:

12:26

Wireless Access Scheduling

Control when your Wi-Fi is on/off

Location: 2.4 or 5GHz Wi-Fi Settings > Access Schedule

User Access Control (MAC/IP)

Restrict network access to specific users

Location: Smart Features > User Access

Wireless Coverage Control

Adjust the distance of your wireless network

Location: 2.4 or 5GHz Wi-Fi Settings > Wireless Coverage

Block Websites

wwwwww

Prevent access to specific websites

Location: Smart Features > Block Websites

Firewall Settings

Protect your network from outside intruders

Location: Firewall Settings

Quality of Service (Prioritize Bandwidth)

Manage your network bandwidth

Web Menu (Left Side)

If you are unfamiliar or want more information on how to set up Smart Features, Firewall Settings, or Quality
of Service, please refer to the User’s Guide at http://support.ampedwireless.com/b1900rt

Location: Quality of Service

LED Indicator Information

Power:

WPS:

Internet Connection:

5GHz Wireless Activity:

2.4GHz Wireless Activity:

Wired Port Activity:

Additional Router Features

Indicates when the Router is powered on. The LED will remain on.

Blinks when Wi-Fi Protected Setup (WPS) is activated and the Router awaits a connection.

Indicates when the Router is connected to a broadband modem.
The LED will light up when Internet traffic is transmitted or received.

The LED will light up when data traffic is transmitted or received over the 5GHz wireless
network.

The LED will light up when data traffic is transmitted or received over the 2.4GHz wireless
network.

The LED will light up when data is being transmitted or received through the wired ports.

a

b

c

Reset the Router to Default Settings

There are two options to reset the Router back to factory default settings:

Access the Reset button through the web menu on the left side under

1

More Settings > Management > Save/Reload Settings. Select the Reset
Settings to Default.

Access the physical Reset button on the back panel of the Router:

2

Hold down the Reset button for five to ten (5-10) seconds. You may
need to use a pen tip or pin to access the button. Pressing the Reset
Button for less than five (5) seconds will simply reboot the Router while
saving your existing settings.

Wired Port LEDs

• Indicates when a device is connected to a wired port (modem or local

network) on the back of the Router. The LED will light up when wired
data traffic is transmitted or received. The green LEDs display
when there is an active gigabit connection.

LED Lights On/Off

• Push button to turn the LED indicators on the front of the Router on or off.

Reset

Button

Wired Ports

LED Lights On/Off

a

b

c

Troubleshooting Tips

PROBLEM:

SOLUTIONS:

PROBLEM:

SOLUTIONS:

I entered setup.ampedwireless.com and it failed to open the Web Menu.

a. Make sure your computer is connected to the Router using the included Ethernet cable.
Ensure that the power on the Router is on.
b. Check that your computer IS NOT connected to any wireless networks. If it is, disable your Wi-Fi connection
and disconnect from all wireless networks. Reboot the Router and try again.
c. Close your current web browser and reopen it. Use Google Chrome, Internet Explorer (8.0 and up), or Safari.
d. Open your web browser and enter 192.168.3.1 into the web address bar.
e. Reset the Router to default settings by holding the Reset button (located on the back panel) for ten (10) seconds

and try again. The Setup Wizard should appear. To access the Dashboard, complete or skip the Setup Wizard.
The Setup Wizard appears only when the Router has not yet been configured.

f. If you still cannot access the menu, disconnect the Ethernet cable and connect wirelessly to the Router. Open

your web browser to setup.ampedwireless.com.

g. If the Setup Wizard appears instead of the Dashboard, the Router has not yet been configured. Complete the

Setup Wizard or skip the Setup Wizard to access the Dashboard.

The Setup Wizard could not automatically configure my Internet connection.

a. Reset your modem by holding down the Reset button located on the back of the modem for approximately
ten (10) seconds. Try again.
b. Reboot the Router by unplugging the power adapter and plugging it back in.
c. Static IP: Your Internet connection may require a static IP setting. Check with your ISP to obtain the IP settings.
d. DSL Connection: Your Internet connection may require login information. If you are using PPPoE mode,
you will need to manually configure your Internet connection settings and obtain your username and password.
e. Cable Modem: Your Internet connection may require you to clone your MAC address. Go to More Settings >
IP Settings > Internet Network (WAN) and select Automatic/Dynamic (DHCP) from the dropdown menu.
Clone your PC’s MAC address under the DNS settings.

If you continue to have issues setting up the Router, give us a call — we’re here to help: 888-573-8820 or 909-217-3168

Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support

Amped Wireless
A Division of Newo Corporation
Copyright © 2017 Amped Wireless / Newo Corporation. All rights reserved.
Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.