Amped wireless AV3000 User Manual
from Amped Wireless
User’s Guide
HOME WIFI NETWORK BRIDGE
for Internet-Ready Audio and Video Devices
AV3000
AV3000
USER’S GUIDE
1
CONTENTS
INTRODUCTION ........................................................... 2
GETTING STARTED ....................................................... 3
Package Contents ........................................................... 3
LED Indicators ................................................................. 4
Back Panel Description ................................................... 5
SETUP GUIDE ............................................................... 6
Find a Setup Location ...................................................... 6
Connect to the A/V Net Connect .................................... 7
Open your Web Browser .............................................. 8
Welcome to the Smart Setup Wizard ........................... 9
Scan for a Wireless Network ...................................... 10
Connecting to a Secure Network ............................... 11
Extended A/V Network Settings (SSID) ...................... 12
Extended A/V Netework Settings (Security) ............... 13
Setup Summary .......................................................... 14
WIRELESS SETTINGS ................................................... 16
Home Network Settings ............................................. 16
Extended A/V Network Settings ................................. 17
Wireless Security ........................................................ 21
Wi-Fi Protected Setup (WPS) ...................................... 20
Advanced Settings ...................................................... 21
SMART FEATURES ...................................................... 22
Wireless Settings: Access Schedule ............................ 23
User Access Control:................................................... 24
Wireless Coverage Controls: ...................................... 25
IP SETTINGS ............................................................... 26
MANAGEMENT FEATURES ......................................... 28
Management: System Clock ....................................... 29
Management: Upgrade Firmware .............................. 29
Management: Save and Reload Settings .................... 32
Management: Password Settings ............................... 33
TECHNICAL SPECIFICATIONS ....................................... 34
DEFAULT SETTINGS .................................................... 35
TROUBLESHOOTING AND SUPPORT INFORMATION ... 36
WARRANTY INFORMATION ........................................ 46
AV3000
USER’S GUIDE
2
INTRODUCTION
Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the
highest quality products through innovation and advanced technology. We pride ourselves on delivering
products that outperform the competition and go beyond your expectations. If you have any questions please
feel free to contact us. We’d love to hear from you and thank you for your support!
Email: sales@ampedwireless.com
Call: 888-573-8830
Web: www.ampedwireless.com
AV3000
USER’S GUIDE
3
GETTING STARTED
Package Contents
Check to make sure you have all the contents within your package:
A/V Net Connect - AV3000
Ethernet Cable
Power Supply
Product Stand
CD with User’s Guide
Two High Power Low Profile Antennas
Setup Guide
AV3000
USER’S GUIDE
4
LED Indicators
WPS: Wi-Fi Protected Setup activity. When the
WPS mode is activated the WPS LED blinks as it
awaits a connection.
Wired Connections: Shows the connection
status and data activity of each wired LAN port.
Wireless Activity: Blinks rapidly when wireless
data traffic is passing through the A/V Net
Connect. When there is a problem with the WiFi connection this LED will remain off or blink
steadily.
Power: When lit, the power is on.
AV3000
USER’S GUIDE
5
Back Panel Description
Antenna Connectors: RJ-SMA antenna connectors.
Compatible with all antennas with RP-SMA connectors.
Upgradable to high gain antennas for more range.
Reset: Push down once to reboot the A/V Net
Connect. Hold down for 5-10 seconds to reset the
device back to factory settings.
WPS: Hold down for 3 seconds to enable WPS push
button configuration.
Wired Connections: RJ-45 ports for connecting to
wired computers or network devices. Supports up to 5
connections.
Power: Power adapter port. DC 12V 1A.
AV3000
USER’S GUIDE
6
SETUP GUIDE
Choose a Setup Location
The location of where you install the A/V Net Connect is very important to how it will function. Place the A/V
Net Connect in the desired room of your entertainment center. If you are using a desktop computer for setup
you may relocate the A/V Net Connect after setup has completed.
AV3000
USER’S GUIDE
7
Connect your PC to the A/V Net Connect
a. Connect the power adapter to the power port on the back of the A/V Net Connect
b. Connect the two included high gain antennas by screwing them into the antenna connectors
c. Use the included Ethernet cable to connect one end into any LAN port on the A/V Net Connect and
use the other end to connect to the network port on your laptop or desktop computer.
Do NOT attempt to connect to the A/V Net Connect with a wireless connection at this time.
DISCONNECT YOUR COMPUTER FROM ALL WIFI NETWORKS BEFORE CONTINUING
AV3000
USER’S GUIDE
8
Open your Web Browser to Access the Smart Setup Wizard
a. Open your web browser
b. Type in:
http://setup.ampedwireless.com
into the web address bar
c. If the web menu fails to open type
in the following IP address into
your web address bar:
http://192.168.1.240
If the Smart Setup Wizard page does not appear, ensure that your computer is disconnected from all
wireless networks and enter http://setup.ampedwireless.com into your web browser again.
AV3000
USER’S GUIDE
9
Welcome to the Smart Setup Wizard
When the web menu appears, click Start
to continue to the next page.
The diagram describes the steps that the
Smart Setup Wizard will guide you
through to complete the configuration of
the A/V Net Connect
AV3000
USER’S GUIDE
10
Scan for a Wireless Network
Click SCAN to begin searching for available wireless networks to
repeat.
Highlight your network and click Next to continue.
If you fail to find any wireless networks, the A/V Net Connect may
be placed too far from the wireless network that you are trying to
repeat. Move your A/V Net Connect closer to the wireless network
that you are trying to repeat and click SCAN again.
The Scan results page will display information regarding the name of
the network (SSID), the channel which the wireless network is
operating on and the type of network that it is. AP stands for Access
Point and is the standard type of wireless network. The results page
will also display whether or not your network has security and what
the signal strength is coming from each specific network detected.
AV3000
USER’S GUIDE
11
Connecting to a Secure Network
If the wireless network you are trying to repeat has wireless security enabled, you will be prompted to enter a
security key. If you did not select a secure network, continue to the next step.
Enter the security key in the space
provided. You do not need to select
what type of security it is, just simply
type in the key and click Next.
The Smart Setup Wizard will
automatically take care of the rest. If the
key you entered is incorrect it will
prompt you to enter the key again. If you
do not know the key to the network you
are trying to repeat, then click Back and
select another network.
AV3000
USER’S GUIDE
12
Extended A/V Network Settings
The default SSID of the A/V Net Connect is “Amped_Av”
This SSID for the Extended Network may be changed by
adjusting the name in the field for the Extended Wireless
Network ID.
This ID will be used by wireless A/V devices connecting to
the A/V Net Connect to identify the A/V Net Connect’s
Extended A/V Network.
It is recommended to use the default settings.
AV3000
USER’S GUIDE
13
Extended Wireless Network Security Key
By default, the Extended Network has
security enabled. The WPA security key is
“wireless.” Users trying to connect to the
A/V Net Connect wirelessly will be
prompted to enter this key.
It is recommended that you use the default
settings for the wireless security key.
To change the security key, simply retype
your new key in the field and click Next. Write your security key down somewhere safe for future reference.
No security key is necessary for computers connecting to the A/V Net Connect using a wired connection to the
LAN ports.
After clicking Next, the A/V Net Connect will reboot and apply your settings. Be patient and do not make any
changes or adjustments to the A/V Net Connect at this time.
AV3000
USER’S GUIDE
14
Setup Summary
Once the A/V Net Connect has rebooted, it will load the Setup Summary page and provide you with the details
of your setup. At this time, you may:
a) Detach the cable from your computer to the A/V Net Connect
b) Place the A/V Net Connect in your entertainment center if you haven’t already. You may power off
the A/V Net Connect during this time.
c) Attach your wired A/V devices to the back of the A/V Net Connect.
d) Connect any wireless A/V devices or computers to the A/V Net Connect’s extended wireless network.
AV3000
USER’S GUIDE
15
If the Home Network connection fails try the following…
a. Check to see that your Home Network security settings are correct.
b. Check that your Home Network router’s DHCP server is enabled.
c. Try changing the channel of the Home Network router to a higher channel number (5-11) and run the
Setup Wizard again.
d. If possible, check the Internet connection for your Home Network wireless router. Connect directly to
your Home Network wireless router. If you are unable to access the internet through the Home
Network wireless router you must first fix this problem. The A/V Net Connect will not be able to
obtain internet access through a router that does not have internet access. Once Internet access is
restored, connect to the A/V Net Connect again and retry the Smart Setup Wizard.
e. Return to the Smart Setup Wizard and attempt to connect to another Home Network known to have
Internet access.
f. Try to reboot (unplug the power from the A/V Net Connect and plug it back in) the A/V Net Connect
and check to see if the connection is established (some networks may be very slow and take longer
than the allotted time for the A/V Net Connect to successfully connect).
Loading...