Ametek ETM2000 Data sheet

December 2000

Issue 1

The ETM-2000 series
Easy Temperature Measurement

G Complete solutions

- Minimize the risk of errors

G Flexible solutions

- May be supplemented as needs change

G Data logging

- Collect and document data from critical measure
ments

G Computer software

- Analyze, present, and store critical measurements

G Industry protected

- The instrument is protected with a rubber boot

G Practical details

- Instruments may be carried on the belt or placed on
a surface

G A safe buy

- Built-in AMETEK quality and features such as
confidence, efficiency, technical support, and service

PRODUCT DESCRIPTION

As a result of the introduction of quality management systems
such as ISO-9000, HACCP, etc., as well as increased focus
on hygiene, environment and security, demands to minimizing
risks and errors have grown. To meet these demands you
need reliable and efficient measuring equipment.

AMETEK has composed a number of complete solutions for
temperature measurement (the ETM-2000 series) and for
pressure measurement (the EPM-2000 series). Each system
is a complete kit that is delivered in a practical, lightweight
carrying case, making it easy to carry around to the various
measuring sites. The configuration eliminates the chance of
forgetting probes, contact paste, or the operating manual.

With 5 different systems the ETM-2000 series (Easy Tem­perature Measurement) covers a broad variety of applications
within temperature measurement. The series has 3 systems
for thermocouples and 2 for Pt100 probes. Both Pt100 models
feature IP67 protection making them very suitable for use in
damp rooms in dairies, slaughterhouses and similar food
environments. 3 of the 5 systems feature ”Speed-Read” func­tions which calculate the temperature after just 14 seconds in
the medium. This saves the operator time when measuring
granulate, powder, and air. Data collection is an option in both
the Pt100 system and the thermocouple system. Results are
shown on the display or on a PC.

FUNCTIONS - ALL MODELS

Backlight: The display light is on as long as the key is

activated.

Display Hold: Freezes the reading – used when watching

the probe is more important than watching the indicator.

Auto switch-off: Auto switch-off after 12 minutes. Extends

battery life (auto switch-off does not operate in max/min mode
or logging mode. The user can also turn off this feature if not
required).

Set-up retention: The instrument switches on with the last

settings used.

FUNCTIONS - SPECIFIC MODELS

SpeedRead>>: This function calculates the temperature after

just 14 seconds in the medium, saving operator time.

A/B, A-B: Enables the user to select input channel A, channel

B, or the difference between them.

C/F: Toggle between Celsius and Fahrenheit.

Range lock: Enables the operator to set the instrument to 1°

resolution only.

Thermocouple selection: Change between the different

thermocouple types.

Max/Min: Stores maximum, minimum, and average tempera-

tures.

Logging on demand: Allows logging up to a maximum of

250 readings.

Pre-set interval logging: Allows readings to be stored auto-

matically at a pre-set time interval.

- 1 -

December 2000
Issue 1

ETM system 1
GENERAL INDUSTRY

Simple and sturdy instrument to be used wherever
temperature measurement is required ­bearings, lubricating oil, ambient air, liquids in
tanks, operational tests, and start of systems, etc.

Instrument: ETM-2000
Probes: General-purpose probe 2101013

Air probe 2301001
Flexible wire cable probe 2304001
Surface probe 2201002

Including: Contact paste, batteries, protective

rubber boot, carrying case with
foam inserts, and instructions

ETM system 2
GENERAL INDUSTRY WITH DATA COLLECTION

Same as system 1, but with more functions and
choice of probe types. Document your measure­ments with the data collection function, store min/
max values, or save time with the “SpeedRead“
function. PC analysis software may be added.
(EasyLink software and interface unit are not
included).

Instrument: ETM-2098
Probes: See system 1
Including: See system 1

ETM system 3
FOOD INDUSTRY

Precise Pt100 measuring instrument in an IP67
waterproof design. Check frozen meat, cold­storage rooms, fermentation processes, bunker
fuel tanks, pasteurization systems, ovens,
hotplates, etc.

Instrument: ETM-2024
Probes: General-purpose probe 121908

Air probe 120909
Needle shaped probe 121910

Including: Batteries, rubber protection boot,

carrying case with foam inserts,
and instructions

ETM system 4
FOOD INDUSTRY WITH DATA COLLECTION

Same as system 3, but with more functions.
Document your measurements with the data
collection function, store min/max values or save
time with the “SpeedRead” function. PC analysis
software may be added. (EasyLink software and
interface unit are not included).

Instrument: ETM-2084
Probes: See system 3
Including: See system 3

FUNCTIONAL COMPARISON

System 1 2 3 4 5

Probe type K KTJNRS Pt100 Pt100 KTJNRS

Dual Input l

SpeedRead ll l

°C and °F llll

Hold ll l l l

Fixed resolution llll

MAX/MIN reading llll

Average ll

Data logging ll

Adjustment from front ll

Temperature range:

Pt100: -150 to 800°C (-238 to 1472°F)

Type K: -200 to 1350°C (-392 to 2462°F)

Type T: -250 to 400°C (-418 to 752°F)

Type J: 150 to 750°C (302 to 1382°F)

Type N: -200 to 1300°C (-392 to 2372°F)

Type R & S: 0 to 1750°C (32 to 3182°F)

PHYSICAL SPECIFICATIONS

Operating temperature: ..................... –10°C to 50°C (14°F to 122°F)

Model ETM-2000, ETM-2029, ETM-2098: ................................. IP65

Model ETM-2024, ETM-2084:.................................................... IP67

Dimensions: ............................ 155 x 67 x 40 mm (6.1 x 2.6 x 1.6 in)

Weight: ........................................................................ 180 g (6.4 oz)

Shipping details complete systems:

Dimensions: ...................... 395 x 350 x 100 mm (15.5 x 13.8 x 4 in)

Weight app.: ................................................................... 2 Kg (4.4 lb)

CE label ....................................................................................... YES

FUNCTIONAL SPECIFICATIONS

Accuracy model ETM-2000, ETM-2029, ETM-2098

K, T, J, N above –100°C (-148°F): ............ 0.1% rdg ±0.2°C (0.36°F)

K, T, J, N below –100°C (-148°F): ............ 0.5% rdg ±0.2°C (0.36°F)

R, S: .............................................. Better than 0.1% F.S. ±0.2% rdg.

Accuracy model ETM-2024, ETM-2084

Pt100: ..................................................... ±0.2% rdg ± 0.1°C (0.18°F)

(All accuracies are ±1 digit)

The above mentioned specification is obtained by combining the
accuracy and any uncertainty due to the measurement process.
However exclusive of the inaccuracy of the probe.
“SpeedRead”: This function reduces the accuracy from
Class 0.5 to 2 (CEN TC141/WG12 N42E applies).

ETM system 5
HEATING AND VENTILATION

Sturdy general purpose system for temperature
measurements in energy installations. Adjustment/
control, measurements in thermometer wells or
direct on pipes (through the insulation), flue gas
temperatures on small oil-fired furnaces, radiator
surface and room temperature measurements, etc.

Instrument: ETM-2029
Probes: General-purpose probe 2101013

Flue gas 2501023
Flexible probe 2304001
Surface probe 2202001.

Including: See system 1

Resolution: .............................. 0.1° up to 199.9°C (392°F) or else 1°

Battery type: ................................................ 2 AA or equivalent cells

Battery life: ......................................................... Typically 500 hours

Auto switch-off: ............................................................... 12 minutes

Low battery indication: .......................... Symbol appears on display

Cold junction compensation: .............................. Yes (system 1,2,5)

PROBE SPECIFICATIONS

Type K (IEC 584 Class 2): ........... ±2.5°C (±3.5°F) or 0.0075 x T

(Whichever is greatest)

Type Pt100 (IEC 751 Class A): ................... ± 0.15°C + 0.002 x T

(±0.27°F + 0.002 x T

- 2 -

actual

actual

actual

)

GENERAL-PURPOSE PROBES

PART NO. DESCRIPTION TEMPERATURE

121908 Pt100. Probe length 150mm (6in), OD 3mm (0.12in). -50 to 250°C (-58 to 482°F)

Acid-proof steel. ** With handle.

2101030 TC-K. Probe length 1000mm (40in), OD 6mm (0.24in). Max. 1000°C (1832°F)

Heat-resisting steel. ** With handle. (shortly up to 1150°C
* T(water)=4.2 T(air)=87 (2102°F))

2101003 TC-K. Probe length 150mm (6in), OD 1.5mm (0.04in). Max. 850°C (1562°F)

Heat-resisting steel. ** With handle. (shortly up to 950°C)
Quick reaction time * T(water)=0.3 T(air)=11 (up to 1742°C)

2101013 TC-K. Data as 2101003, but OD 3mm (0.12in). Max. 1000°C (1832°F)

2101025 TC-K. Probe length 400mm (16in), OD 6mm (0.24in) Max. 800°C (1472°F)

with small OD 1.5mm (0.04in) point. (the point shortly 950°C
Stay tubes in stainless steel. ** With handle. (1742°F))
* T(water)=0.3 T(air)=11 “quick reaction time”

AIR/SPACE PROBES

December 2000

Issue 1

* T(water)=1.3 T(air)=35

2301001 TC-K. Probe length 100mm (4in), OD 6mm (0.24in). Max. 250°C (482°F)

121909 Pt100. Data as 2301001, but with Pt100 element. -50 to 250°C (-58 to 482°F)
2301011 TC-K. Data as 2301001, but with an attached plug. Max. 250°C (482°F)
121964 Pt100. Data as 2301001, but with Pt100 element and -50 to 250°C (-58 to 482°F)

2304001 TC-K. Flexible wire cable, glass silk insulated Max. 400°C (752°F)

2304005 TC-K. As 2304001 but with a length of 5.0m (16.4ft). Max. 400°C (752°F)
2304010 TC-K. As 2304001 but with a length of 10.0m (33ft). Max. 400°C (752°F)

Freely exposed probe element protected against
radiation. Stainless steel. Especially for
air measurements. ** With handle.

an attached plug.

2 x 0.2mm (0.008in). Length 1.5m (9ft).

NEEDLE SHAPED PROBES

2401011 TC-K. Probe length 100mm (4in), OD 3mm (0.12in). Max. 400°C (752°F)

121910 Pt100. Data as 2401011, but with Pt100 element. -50 to 250°C (-58 to 482°F)
2401021 TC-K. Probe length 100mm (4in), OD 3mm. (0.12in). Max. 400°C (752°F)

121963 Pt100. Data as 2401021, but with Pt100 element. -50 to 250°C (-58 to 482°F)
2401030 TC-K. Oven/roasting probe. Probe length 100mm (4in), Max. 400°C (752°F)

Needle shaped handle with cross grab for easy
removal from frozen meat, etc.
All in stainless steel. With spiral cable and plug.

Needle shaped for easy removal from fresh food, etc.
Stainless steel. ** With handle.

OD 3mm (0.12in). Stainless steel. Angled probe with
needle shaped point. Heat-resisting lead wires,
length 1.5m (9ft) and plug.

SURFACE PROBES

2201002 TC-K. Probe length 30mm (1.2in), OD 9mm (0.35in). Max. 500°C (932°F)

2202001 TC-K. Probe length 150mm (6in), OD 4mm (0.16in). Max. 400°C (752°F)

2202010 TC-K. Angled surface probe. Max. 400°C (752°F)

Sturdy probe for general use. ** With handle.

Well suited for e.g. surface measurement on
insulated tubes and at the bottom of
thermopockets. ** With handle.

Probe length 200mm (7.9in), OD 4mm (0.16in).
Well suited for places that are hard to access.

FLUE GAS PROBES

2501023 TC-K. Probe length 250mm (10 in), OD 6 mm (0.25 in). Max. 800°C (1472°F)

T = Time constant. The time required to reach 63% of the temperature in water or air. Stated in seconds.

*

Mounted with a sturdy plastic handle (tolerates max. 110°C (230°F)). Spiral cable, length 30 to 150cm (1 to 5ft)

**

and plug matching the ETM-2000 series.

Exchangeable thermocouples. Flue gas tap for
CO2 or O2 measuring equipment. Adjustable screw
thread cone with setscrew. The probe has a metal
handle, spiral cable and plug.

- 3 -

December 2000
Issue 1

SYSTEMS & INDICATORS

PART NO. DESCRIPTION

75-ETM-System 1F General industry (Fahrenheit) (ETM-2000)
75-ETM-System 1C General industry (Celcius) (ETM-2000)
75-ETM-System 2 General industry with data collection

(ETM-2098)
75-ETM-System 3 Food industry (ETM-2024)
75-ETM-System 4 Food industry with data collection

(ETM-2084)
75-ETM-System 5 Heating and ventilation (ETM-2029)

ACCESSORIES & OPTIONS

SYSTEM PART NO. DESCRIPTION

3 4 121985 Extension cable - Pt100 probes, 5.0 m (16.5 ft)
1 2 5 121983 Extension cable - Type K probes, 5.0 m (16.5 ft)
2 5 122523 Extension cable - Type N probes, 5.0 m (16.5 ft)
1 2 5 120517 Spare thermocouple plugs Type K (yellow)
2 5 120515 Spare thermocouple plugs Type T (blue)
2 5 120514 Spare thermocouple plugs Type N (orange)
3 4 122525 Spare Pt100 plug for the ETM-2000 series
1 2 5 2206011 Wire adapter for spare thermocouples

wire Type K. Plugs on one end and correct
materials on the other.

Suitable for concrete measurements
2 5 2206012 Data as 2206011 but for Type T.
All 120913 Tube with 100 g contact paste for surface

measurements max. 200°C (392°F)
All 105487 Rubber boot for all ETM-2000 instruments
All 105763 Black plastic carrying case w/foam inserts
All 105766 User manual for the ETM-2000 series
2 4 105765 EASY-LINK PC software package with

analysis software, interface unit, and

RS-232 cable

LOGGING
EasyLink software package

The ETM models with logging functions can log up to
250 measurement points. For example, readings can
be taken over a two day period once every ten minutes.
You may preset the interval between the measurements
directly on the key pad of the ETM instrument. All
measurements are fully traceable with records on date
and time. You may either view the measured data directly
from the display of the ETM instruments or download the
data to a computer using the EasyLink software.

Models with logging functions have an infrared interface
on the back. Via the EasyLink interface unit all data logged
may be transferred to a computer. EasyLink is a Win­dows-based program with clear icons for each different
function.

The software can show data in graphical format. Zoom
in on data of particular interest and allows for com­parison with previous data to illustrate deviations, etc.
Analyse, print or download data to spread-sheets, data
bases, or directly into reports. Reduce the risk of
clerical errors and save keying-in time of results.

2 year warranty

AMETEK is a leading global manufacturer of electrical and electromechanical products for niche
markets. Listed on the New York Stock Exchange (AME) since 1930, AMETEK’s annual sales are
approaching $1billion. Operations are in North America, Europe and Asia, with about one third of
sales to markets outside the United States.

AMETEK Test & Calibration
Instruments

8600 Somerset Drive
Largo, Florida 33773, USA
Tel [phone]
Tel [phone]

Fax [phone]

Information within this document is subject to change without notice.

AMETEK is a registered trademark of AMETEK, Inc.

Pub Code SS-CP-2283-1200
Issued 12/00

AMETEK Denmark A/S

Gydevang 32-34
Post Office Box 30
DK-3450 Allerød
Denmark
Tel [phone]
Fax [phone]
E-Mail [e-mail]

Copyright 2000, by AMETEK Inc.

AMETEK Precision
Instruments Europe GmbH

Postfach 2165
D-40644, Meerbusch
Germany
Tel [phone]
Fax [phone]

AMETEK Singapore Pte. Ltd.

10 Ang Mo Kio Street 65
#05-12 TECHPOINT
Singapore 569059
Tel [phone]
Fax [phone]

E-Mail [e-mail]

ISO 9001

Manufacturer

www.ametek.com/tci

- 4 -