American Standard R126SS User Manual

MOMENTS

T506.602 Shown with R126SS

MODEL NUMBER:

PRODUCT FEATURES:

Solid Brass Construction: Durable, ideal material for

prolonged contact with water.

Ceramic Disc Valve Cartridge:

Assures a lifetime of drip-free performance. Allows easy control over both water temperature and volume.

Pressure Balancing Valve: Maintains output

temperature in response to changes in relative hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow and spool “thumping”. Avoids failure due to mineral deposits - ideal for use with hard water.

Built-in Diverter: Easy to use, integrated in valve body

and includes positive shut-off. Allows spout and showerhead in any desired installation location.

Adjustable Hot Limit Safety Stop: Limits the

amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Integral Plaster Guard and Mounting Plate:

Plaster guard designed to protect valve during installation and to serve as a mounting plate for thin wall installations.

GENERAL DESCRIPTION:

Cast brass valve body. Washerless 47mm ceramic disc

valve cartridge with volume and temperature control. Hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressures. threaded 1/2" NPT inlets/outlets with screwdriver stops.

SUGGESTED SPECIFICATION:

Bath/shower fitting shall be cast brass construction with all brass spout. Shall also feature washerless

ceramic disc valve

cartridge. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American

R126SS Pressure Balance Rough Valve Body With Built-in Diverter & Screw Driver Stops. LESS Trim.

R126SS

T506.602

T506.600

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 ASSE 1016

T506.600 Valve Only Trim Kit With Built-in Diverter

• Brass wall escutcheon

• LESS Valve

T506.602 Bath/shower Trim Kit With Built-in Diverter

• Brass wall escutcheon with built-in diverter

• Adjustable “3 function” Showerhead

• Brass tub spout

• LESS Valve

Sho w e r h e a d has

2.5gpm/9.5L/min. flow restrictor. Integral diverter. Durable brass wall escutcheon. Metal lever handle. Rough-in plaster guard designed for use as thin-wall mounting adapter. Brass tub spout.

Standard Model # R126SS with T506.___.___ trim kit.

THREADED INLETS (STOPS)

INLETS

1/2" NPT

5-5/8"

1-3/4"

OUTLETS 1/2" NPT

PRESSURE BALANCE BATH/SHOWER

5-5/8" REF.

1-5/8" TO 3-1/4"

BOTTOM OF

TUB

74" FOR

HEAD CLEARANCE

1/2" NPT

FINISHED WALL

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

80'' AND 86'

8-1/8" REF.

6-1/2"

1/2" NPT

1-1/2" REF.

18"

OPTIONAL

"SEE ILLUSTRATION"

TO P OF

TU B RIM

SHW

TUB

8-3/8"

2-3/8"

PRESSURE BALANCE BATH/SHOWER FITTING

WITH BUILT- IN DIVERTER

B13

MOMENTS

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S SU R E ( PS I )

*Flow rates shown are for mixed hot and cold.

Shower

Spout

10080604020

R126SS

Pressure Balance Rough Valve Body w/Built-in Diverter & Screw Driver Stops. LESS Trim.

T506.602

Bath/Shower Trim Kit. LESS Valve.

T506.600

Valve only Trim Kit. LESS Valve.

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 ASSE 1016

Product Number

Description

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

PVD

Stainless

Steel

075

Finish Options

Polished

Chrome

002

N/A N/A

PRESSURE BALANCE BATH/SHOWER FITTING

WITH BUILT- IN DIVERTER

B14