American Standard R120, R125, R125SS, R120SS User Manual
See reverse for available trim kits.
MODEL NUMBER:
R120 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R120SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R125 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R125SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R127 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R127SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
Cast brass body, washerless 47mm ceramic disc valve
cartridge with volume and temperature control, and hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. One-half inch
inlets and outlets (choice of direct sweat, threaded, or
PEX). Available with screwdriver stops. Rough-in
plaster guard designed for use as thin-wall mounting
adaptor. Valve body will accept a variety of decorative
Bath/Shower trim kits.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will
last a lifetime. Ideal material for prolonged contact with
water.
Ceramic Disc Valve Cartridge:
Assures a lifetime
of drip-free performance. Allows easy control over both
water temperature and volume.
Pressure Balancing Valve Cartridge: Maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. Diaphragm
system engineered to eliminate cross flow. Avoids
failure due to mineral deposits - ideal for use in hard
water.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed
to protect valve during installation and serve as a
mounting plate for thin-wall installations. Two piece
design allows valve to be tested prior to trim
installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water
temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure
due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #
R12____, Trim Kit - American Standard Model # ____.____.
R120 Valve Body Shown
Available Trim Kits
FINISHED
WALL
TOP OF TUB RIM
BOTTOM OF TUB
(1-5/8 TO 3-1/4)
41mm TO 83mm
1/2"
NPT
1/2"
COPPER
102 mm
(4")
25mm
(1 MIN.)
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R125SS)
86 mm
(3-3/8")
INLETS 1/2" NPT
149 mm
(5-7/8")
OPTION 457 mm
(18")
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 1651mm (65)
AND 1981mm (78)
THREADED (R125)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R120SS)
SWEAT (R120)
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
VALVE BODY OPTIONS
Ceramix
Princeton
Copeland
Colony Soft
Reliant 3
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (STOPS) (R127SS)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
165mm
(6-1/2")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R127)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
Seva
Jasmine
Green Tea
StandardMoments
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
© 2008 AS A meric a Inc.
B7
• Showerhead with 2.5gpm/9.5L.min. flow restrictor.
R120
Direct
Sweat
Inlets/
Outlets
R125
Female
Thread
Inlets/
Outlets
R125SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R120SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R127
PEX
Inlets/Direct
Sweat
Outlets
R127SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R120 - Direct Sweat Valve Body
T508.502 - Princeton Bath/Shower Trim Kit
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N LE T P RE SS UR E (P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
Moments
B/S
Shower
Valve
B/S
Shower
T675.502
T675.501
T675.500
T385.502
T385.501
T385.500
T385.522
T385.521
T385.520
T480.502
T480.501
T480.500
T508.502
T508.501
T508.500
Seva
Princeton
Reliant 3
Colony
"Soft"
TRIM KITS
Reliant 3
w/mod
Plate
T480.508
T480.507
Seva
with
FloWise
T385.508
T385.507
Reliant 3
with
FloWise
T675.508
T675.507
Colony
"Soft" with
FloWise
®
T000.502
T000.501
T000.500
T506.502
T506.501
T506.500
T6282
T6281
T6280
T808.502
T808.501
T808.500
T010.502
T010.501
T010.500
B/S
Shower
Valve
Jasmine
Ceramix Standard
TRIM KITS
T005.502
T005.501
T005.500
Green Tea
Copeland
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
© 2008 AS A meric a Inc.
B8
Loading...