American Standard R120, R120SS, R125, R125SS, R127 User Manual
...
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
MODEL NUMBER:
R120 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
Available Trim Kits
Colony® Soft
™
Copeland
Green Tea
®
Princeton
Moments
Town Square
®
®
®
Reliant® 3
Portsmouth
®
Studio
®
Seva
Ceramix
Quentin
H
C
F
F
O
™
®
™
R120 Valve Body Shown
GENERAL DESCRIPTION:
Cast brass body, washerless 47mm ceramic disc valve
cartridge with volume and temperature control,
back-to-back capability, integrated check valves, and hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. One-half inch inlets
and outlets (choice of direct sweat, threaded, or PEX).
Available with screwdriver stops. Rough-in plaster guard
designed for use as thin-wall mounting adaptor. Valve body
will accept a variety of decorative Bath/Shower trim kits.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will last
a lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy control over both water
temperature and volume.
Pressure Balancing Valve Cartridge: Maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. Diaphragm system
with integrated check valves engineered to eliminate cross
flow. Avoids failure due to mineral deposits - ideal for use in
hard water.
Back-to-Back Capability: Hot and cold can be
reversed quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount
of hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting
plate for thin-wall installations. Two piece design allows
valve to be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
R120SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R125 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R125SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R127 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R127SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
See reverse for available trim kits.
41mm TO 83mm
(1-5/8" TO 3-1/4")
FINISHED
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 1651mm (65")
AND 1981mm (78")
OPTION 457 mm
(18")
38mm
(1-1/2" MIN.)
102 mm
COPPER
(4")
TOP OF TUB RIM
BOTTOM OF TUB
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
WALL
1/2"
109mm
(4-1/4")
PEX (R127)
52mm
(2-1/32")
1/2" PEX INLETS
(ASTM F1807)
1/2"
NPT
104mm
(4-1/16")
VALVE BODY OPTIONS
SHR. 1/2" NOM.
COPPER SWEAT
INLETS 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
INLETS
1/2" NPT
TUB 1/2" NOM.
COPPER SWEAT
INLETS
(3-3/8")
86mm
(3-3/8")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R125SS)
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
INLETS
103mm
(4-1/16")
51.5mm
(2-1/32")
SWEAT (R120)
149mm
(5-7/8")
SWEAT (STOPS) (R120SS)
86mm
THREADED (R125)
149mm
(5-7/8")
165mm
(6-1/2")
PEX (STOPS) (R127SS)
51mm
(2")
SHR
1/2" NPT
INLETS
1/2" NPT
TUB PORT
1/2" NPT
INLETS 1/2" NPT
(2-1/32")
1/2" PEX INLETS
(ASTM F1807)
52mm
103 mm
(4-1/16")
103mm
(4-1/16")
86mm
(3-3/8")
104mm
(4-1/16")
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water
temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure
due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #
R12____, Trim Kit - American Standard Model # ____.____.
© 2013 AS America Inc.
B9
Revised 10/13
R120
Direct
Sweat
Inlets/
Outlets
R125
Female
Thread
Inlets/
Outlets
R125SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R120SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R127
PEX
Inlets/Direct
Sweat
Outlets
R127SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
B/S
Shower
Valve
B/S
Shower
T675.502
T675.501
T675.500
T385.502
T385.501
T385.500
T385.522
T480.502
T480.501
T480.500
T508.502
T508.501
T508.500
TRIM KITS
T480.508
T480.507
T385.508
T385.507
T675.508
T675.507
T000.502
T000.501
T000.500
T506.502
T506.501
T506.500
T420.508
T420.507
T420.500
T508.508
T508.507
T010.502
T010.501
T010.500
T440.502
T440.501
T440.500
B/S
Shower
Valve
B/S
Shower
Valve
TRIM KITS
T415.508
T415.507
T415.500
T005.502
T005.501
T005.500
T005.508
T005.507
T506.508
T506.507
T010.508
T010.507
T555.522
T555.521
T555.520
T590.508
T590.507
T590.500
T555.528
T555.527
T440.508
T440.507
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R120 - Direct Sweat Valve Body
T508.502 - Princeton Bath/Shower Trim Kit
Direct Sweat
Inlets/Outlets
w/ Screwdriver
®
R120SS
Stops
Reliant® 3
Soft
R125
Female
Thread
Inlets/
Outlets
w/mod Plate
R120
Direct
Sweat
VALVES
Inlets/
Outlets
Colony
Female Thread
Inlets/Outlets
w/ Screwdriver
Reliant® 3
R125SS
Stops
Princeton
R127
PEX
Inlets/Direct
Sweat
Outlets
®
Seva
Inlets/Direct
Sweat Outlets
w/ Screwdriver
™
Copeland
R127SS
PEX
Stops
™
8
6
4
2
GALLONS PER MINUTE
0
*Flow rates shown are for mixed hot and cold.
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125
• Showerhead with 2.5gpm/9.5L.min. flow restrictor.
FLOW RATE*
INLET PRESSURE (PSI)
Spout
10080604020
B/S
Shower
Val ve
T675.502
T675.501
T675.500
T385.502
T385.501
T385.500
T385.522
T508.502
T508.501
T508.500
T480.502
T480.501
T480.500
T005.502
T005.501
T005.500
TRIM KITS
© 2013 AS America Inc.
B/S
Shower
B/S
Shower
Val ve
TRIM KITS
B/S
Shower
Val ve
Colony® Soft
T675.508
T675.507
Ceramix
®
T000.502
T000.501
T000.500
Reliant® 3
T385.508
T385.507
Moments
T506.502
T506.501
T506.500
Moments
T506.508
T506.507
®
®
Portsmouth
H
T420.508
T420.507
T420.500
C
Princeton
T508.508
T508.507
®
Portsmouth
T415.508
T415.507
T415.500
®
®
™
Seva
T480.508
T480.507
Green Tea
T010.502
T010.501
T010.500
Green Tea
T010.508
T010.507
B10
Copeland
T005.508
T005.507
®
Town Square
T555.522
T555.521
T555.520
®
Town Square
T555.528
T555.527
™
®
®
Studio
T590.508
T590.507
T590.500
™
Quentin
H
C
F
F
O
T440.502
T440.501
T440.500
®
Quentin
T440.508
T440.507
™
Revised 10/13
FOR VOLUME & TEMPERATURE CONTROL VALVES
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
TRIM KITS
Trim Kit Finishes Roughing-In Dimensions
COLONY® SOFT
Model # / Description
T675.502 BATH/SHOWER Trim Kit
• Metal Lever handle
• "Easy Clean" Showerhead
.002
Polished Chrome
.295
Satin Nickel (PVD)
FINISHED WALL
4" REF.
(102mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
• Shower arm and flange
COLONY® SOFT
RELIANT
®
• Metal slip-on Diverter tub spout
T675.501 SHOWER ONLY Trim Kit
• Metal Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
T675.500 VALVE ONLY Trim Kit
• Metal Lever handle
2.5gpm/9.5L/min. maximum
flow rate
T675.508 BATH/SHOWER Trim Kit
• Metal lever handle
Water Saving FloWise®
•
Showerhead
• Turbine Spray - 1.5gpm max. flow
• Angle adjustable
• Showerhead, arm and flange
Metal slip-on diverter tub spout
•
T675.507 SHOWER ONLY Trim Kit
• Metal lever handle
Water Saving FloWise
•
Showerhead
• Turbine Spray - 1.5gpm max. flow
• Angle adjustable
• Showerhead, arm and flange
1.5gpm/5.7L/min. maximum
flow rate
3
T385.502 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Metal lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Metal slip-on diverter tub spout
T385.501 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
.002
Polished Chrome
Satin Nickel (PVD)
.295
.002
Polished Chrome
.295
Satin Nickel (PVD)
74" FOR HEAD
CLEARANCE
(1880mm)
74" FOR HEAD
CLEARANCE
(1880mm)
108mm
(4-1/4" REF.)
74" FOR HEAD
CLEARANCE
(1880mm)
18"
(457mm)
optional
4" REF.
(102 mm)
FINISHED WALL
4" REF.
(102mm)
18"
(457mm)
optional
4" REF.
(102 mm)
18"
(457mm)
optional
7" REF.
(178mm)
1-1/2" REF.
(38mm)
5-1/8" REF.
(130mm)
BOTTOM OF TUB
7" REF.
(178mm)
1-1/2" REF.
(38mm)
5-1/8" REF.
(130mm)
BOTTOM OF TUB
1-5/8" TO 3-1/4"
(41mm - 83mm)
FINISHED WALL
152mm
(6" REF.)
1-1/2"REF.
(38mm)
6"
(153mm)
1/2" COPPER
TOP OF TUB RIM
1-5/8" TO 3-1/4"
(41mm - 83mm.)
6"
(153mm)
1/2" COPPER
TOP OF TUB RIM
7-1/2"
(191mm)
3" (76mm)
6-3/4"
(172mm)
3" (76mm)
6-3/4"
(172mm)
3" (76mm)
7-1/2"
(191mm)
T385.500 VALVE ONLY Trim Kit
RELIANT
• Metal wall escutcheon
• Metal lever Handle
2.5gpm/9.5L/min. maximum
flow rate
®
3
T385.522 BATH/SHOWER Trim Kit
• Large metal wall escutcheon
• Metal lever Loop handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Metal slip-on diverter tub spout
2.5gpm/9.5L/min. maximum
flow rate
.002
Polished Chrome
.295
Satin Nickel (PVD)
4"
(102mm)
108mm
(4-1/4" REF.)
74" FOR HEAD
CLEARANCE
(1880mm)
(457mm)
optional
(102mm)
TOP OF TUB RIM
1-5/8" TO 3-1/4"
(41mm - 83mm)
FINISHED WALL
18"
1-1/2" REF.
4"
TOP OF TUB RIM
5-1/2" REF
(140mm)
BOTTOM OF TUB
152mm
(6" REF.)
(38mm)
5-1/2" REF
(140mm)
BOTTOM OF TUB
1/2" COPPER
9"
(228mm)
1/2" COPPER
3" (76mm)
13"
(330mm)
© 2013 AS America Inc.
B11
Revised 10/13
Loading...