EVOLUTION® 24"
PEDESTAL SINK
VITREOUS CHINA
EVOLUTION® 24" PEDESTAL SINK
•Vitreous china lavatory and pedestal
•Rear overflow
•Faucet ledge with generous shelf area
•Supplied with mounting kit
0468.100 Faucet holes Center Hole only
0468.400 Faucet holes on 4" (102mm) centers
0468.800 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
24" x 18-3/4" x 34-1/4" (610 x 477 x 870mm)
Separate Components:
0468.001 Pedestal top Center Hole only
0468.004 Pedestal top 4" (102mm) centers
0468.008 Pedestal top 8" (203mm) centers
731150-400 Pedestal only
|
24" |
|
|
|
FINISHED |
(610mm) |
|
|
|
8" |
3 x 1-3/8" |
|
||
WALL |
|
|||
(203mm) |
(35mm) |
2-1/2" |
||
|
||||
|
|
DIA |
||
|
|
(63mm) |
||
|
|
|
||
|
|
|
7-7/8" |
|
|
|
|
(200mm) |
Bowl sizes:
19-3/4" (502mm) wide
12" (305mm) front to back
6" (152mm) deep
|
1-3/4" |
2-1/2" |
18-3/4" |
|
(44mm) |
(64mm) |
|
|
|
|
(477mm) |
|
|
24" |
|
|
7-1/8±1/4" |
(610mm) |
|
|
|
|
|
3-1/8±1/4" |
(180±5mm) |
|
|
(78±5mm) |
REF. |
|
|
8-1/8±1/4" (210±5mm)
34-1/4" (870mm)
Compliance Certifications -
31-1/4"
Meets or Exceeds the Following Specifications: (794mm)
• ASME A112.19.2M for Vitreous China Fixtures |
23" |
(584mm)
20-1/2" (521mm)
6-1/2" HOLES FOR (166mm)
ANCHOR BOLTS
SUPPLIES
AS REQ'D
1-1/4" O.D. WASTE
1-1/4" O.D. 7" TAILPIECE
(178mm)
27-5/8" |
OPEN TO |
(702mm) |
FLOOR |
C
L
To Be Specified:
Color: White Bone Linen
Faucet:
Faucet Finish:
Supplies:
1-1/4" Trap:
©2014 AS America Inc.
|
7" |
|
|
|
6-1/4" |
|
BACK VIEW |
|||
|
|
|
|
|||||||
(178mm) |
|
|
|
(158mm) |
|
|
|
|||
FRONT VIEW |
SIDE VIEW |
|
||||||||
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.
▼ ANCHOR SCREWS FOR PEDESTAL NOT INCLUDED. INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
■ SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
J17
Rev. 2/14
Loading...