Page 1
Model 1000
American Sensor Technologies
American Sensor Technologies
T
A
Your sensor business partner...
TM
Technology
by AST
TM
Bond
K
rystal
Media Isolated Solid State Pressure Switch
OVERVIEW
The Model 1000 is a high quality, stainless steel media isolated Solid
State Pressure Switch. This highly repeatable switch is designed for
use w h e n m e a s uring gases and liquids tha t a r e c o m patible with
stainless steel. The Model1000 is offered with factory set switch and
hysteresis points. Packaged with heavy duty relay contacts, as well as
high electrical isolation, this pressure switch is built to handle a variety
of applications. The Model 1000 is ideal for applications that require
co nsiste nt rep eatabi lity, e xcelle nt lon g-term stabi lity, t rouble free
operation, long life and high performance. The competitive pricing set
for the Model 1000 in no way diminishes it’s performance.
BENEFITS
g High Streng th Sta inless Steel Const ructio n
g No Si licone Oil, No Int ernal O-ring s, No Welds
g Wide Operat ing Tempe rature Range
g Switc h Poin ts up to 10, 000 PS I
g Switc hing C apabil ity of 1 Amp @ 24VDC
or 0 .5 Amps @ 125VA C, max
g Low S tatic and T hermal Error s
g Unpar alled Price to Per forman ce Rat io
g Rugge d Desi gn Sur vives Harsh Enviro nments
g Compa tible with a Wide Range of Liq uids
g Suita ble fo r High Shock and Vibrat ion Appl icatio ns
APPLICATIONS
g OEM E quipme nt g Compr essors
g Tes t Stan ds g Ref rigera tion
g Off Road g Pn eumati cs
g Proce ss Con trol g Semico nducto r Proc essing
Performance @ 25°C (77°F)
Environmental Data
Temperature
Media -55 to 125°C (-65 to 250°F)
Operating (ambient) -40 to 85°C (-40 to 185°F)
Storage
Thermal Limits
Compensated Range 0 to 55°C (-30 to 130°F)
Thermal Error <±2% of FS
Other
Shock
Vibration 10G peak, 20 to 2000 Hz.
EMI/RFI Protection: Yes
Rating: IP-66
-55 to 125°C (-65 to 250°F)
100G, 11 msec, 1/2 sine
Stability (1 year) ±0.25%FS, typ
Repeatability < ±0.5% FS, typ
Proof Pressure* 2X System Pressure Max
Burst Pressure
Pressure Cycles > 1 Million
Reaction Time < 100 msec, typ
*System Pressure Max must not exceed Proof Pressure.
Please consult factory for custom Proof Pressure.
5X System Pressure Max
or 20,000 PSI whichever is less.
Electrical Data
Voltage Supply 10-32VDC, typ
Switching Current 1 Amp @ 24VDC or
Output Type Open or Closed, Customer
Dead Band Customer to Dene -Factory Set
Reverse Polarity Yes
8 Leroy Road, PO Box 1073 Williston, VT 05495
Phone: (802) 863-0085 Fax: (802) 863-1193
Email: [email protected]
0.5 Amps @ 125VAC
to Dene Switching Point
from 10% to 90% of Switching Point
Page 2
ORDERING INFORMATION
1000 A 00100 P C 01 E 1 0 00
Series Type
Process Connection
A = 1/4”-18 Male NPT
B = 1/8”-27 Male NPT
C=1/4”BSPP
N = 1/4” VCR Male
Switch Point
Insert Switch Point code from CHART 1
Pressure Unit
B= BAR | K= kg/cm2 | P= PSI
Switch Congurations
C=Normally Open
D=Normally Closed
E=Normally Open (1 pair) and Normally Closed (1 pair)*
Chart 1
Switch Point**
PSIG
25 00025
50 00050
100 00100
250 00250
500 00500
1000 01000
2500 02500
5000 05000
10,000 10000
**Typical Switch Points. All Switch
Points between 25PSI and 10,000 PSI are available.
Please consult factory.
Code
Chart 2
System/Line Pressure, Max.
Insert Max psi code from CHART 2
Electrical Interface
A= 2 ft. Cable E=Mini DIN 43650 Connector
B= 4 ft. Cable I=DIN 43651 Connector
C= 6 ft. Cable R=6 Pin Bendix Connector*
D= 10 ft. Cable
Wetted Material
0=17-4 PH Stainless Steel
1=316L Stainless Steel
Dead Band
0% std (Factory Set)
For other Dead Band, please consult factory.
Options
00= No special potions
*Note: Switch Conguration “E” only.
Available with DIN43651 and 6 Pin Bendix Electrical Interfaces.
Max PSI+ Code
50 01
100 02
250 03
500 04
1000 05
2500 06
5000 07
7500 08
10,000 09
+Note: Switch Point, Min. must be at least 10%
of System/Line Pressure, Max.
DIMENSIONAL DATA
Warranty
Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST,
Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units
that have been modied, misused, neglected or installed where the application exceeds published ratings. AST’s
www.ttiglobal.com
sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit!
Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and
correct installation of the transmitter.
© 2007 American Sensor Technologies Inc. All specications are subject to change without notice. Form Model1000, Rev 3/26/07
Loading...