American DJ Rolling Star User Manual

11” x 21.5” x 21.5”L
3x ZB-64514 120v/300w
10A
Multi-Colors
45
110V
Congratulations and Thank you for purchasing the Rolling Star. The Rolling Star is a medium sized
The Rolling Star has been tested and lamped at the factory. No assembly is required.
The fixture may be mounted upside down or placed on a flat surface. After placing your fixture in a secure
tumble and turn immediately.
Never open unit while in use, lamp will get very hot and may cause serious injury. Always disconnect
specified by a technician.
Disconnect power. Remove three thumb screws that fasten the outer half of the sphere
to the inner half. Remove the outer half of the sphere to expose the lamp. Remove the old lamp and replace
socket and reassemble.
Always replace with the exact same type lamp and fuse, unless otherwise instructed to do so by an authorized
American DJ technician.
American DJ® provides a toll free customer support line, to provide set up help and to
tact American DJ®. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.
support@americandj.com
This fixture is fitted with a halogen
touch lamp with bare fingers, oil from
your hands will shorten lamp life. Also,
American DJ
American DJ
Loading...