American DJ Razz Mataz User Manual

RazzMaTazz™ Unpacking

Thank you for purchasing the RazzMaTazz™ by American DJ®. Every
RazzMaTazz™ has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your unit for any damage and be sure
all equipment necessary to operate the system has arrived intact. In the
event damage has been found or parts are missing, please contact our
toll free customer support number for further instructions. Please do not
return the unit to your dealer without rst contacting customer support.

RazzMaTazz™ Introduction

Customer Support:

American DJ® provides a toll free customer support line, to provide set
up help and to answer any question should you encounter problems
during your set up or initial operation. You may also visit us on the web
at www.americandj.com for any comments or suggestions. For service
related issue please contact American DJ®. Service Hours are Monday
through Friday 9:00 a.m. to 5:00 p.m. Pacic Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [e-mail]

User Instructions

American DJ

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war­ranty. In the unlikely event your unit may require service please contact
your nearest American DJ dealer.

PLEASE do not discard the shipping carton in the trash. Please
recycle when ever possible.

Safety Issues: This unit may blow a fuse if the maximum allotted
load of 15 amps is reached. If the fuse needs replacement, always
replace the fuse with same exact type that was remove, unless
otherwise instructed by an authorized American DJ® service techni­cian. Use of a different type fuse from that which is recommended may
cause fire or electric shock and will void the manufactures warranty.

©American DJ Supply® - www.americandj.com - RazzMaTazz™ Instruction Manual Page 2

RazzMaTazz™ General Instructions

RazzMaTazz™ Operation

Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte­nance of this unit. Please keep this manual with the unit, for future ref­erence.

RazzMaTazz™ Precautions

• Keep the outside of this device dry at all times. Do not spill water or
other liquids into or on to your unit. To prevent re or shock hazard,
do not expose this product to rain or moisture.

• Be sure to save the packing carton in the event you may have to
return the unit for service.

• This unit is designed for interior use only. Do not use this unit out
doors. Use of product outdoors will void the warranty.

• Be sure that the local power outlet match that of the required volt­ age for your unit.

• Do not attempt to operate this unit if the power cord has been
frayed or broken.

• Always route your power cord out of the way of foot trafc.

• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and re in the rare case of an internal short.

• Disconnect the unit’s main power when left unused for long periods
of time.

• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.

• Never block the ventilation holes.

• Do not attempt to operate this unit, if it becomes damaged in any
way.

• Never operate this unit when it’s cover is removed.

• This unit is for adult use only. Keep out of the reach of children.

RazzMaTazz™ Halogen Lamp Warning

This fixture is fitted with halogen lamps which are highly susceptible to
damage if improperly handled. Never touch lamp with your bare fingers
as the oil from your hands will shorten lamp life. Also, never move the
fixture until the lamps have had ample time to cool. Remember, lamps
are not covered under warranty conditions.

Introduction: Thank you for purchasing the RazzMaTazz™ by
American DJ®. For your convenience the RazzMaTazz™ has been
lamped and is ready to be used, there is no assembly necessary.
This unit includes a hanging bracket and may be hung or set on a flat
surface. For best results, use a fog or haze machine to enhance the
beam output. Please read the following instructions before installing or
operating your new RazzMaTazz.™

Operating Instructions: Plug the unit in to a matching power outlet
or into a power pack. Light output will be immediate when the unit
is powered on. The unit must receive a sound source to operate
normally. If there is no sound source the beams of light will not bounce
up and down.

Mounting: When used with included mounting bracket, this unit may
be mounted in any safe position or set on a flat stable surface.

Caution! Be sure not to obstruct cooling vents and keep this unit in a
well ventilated area. Never open the unit while in use. Avoid touching
the lamps, the lamp will get extremely hot under normal usage and
may cause serious injury.

RazzMaTazz™ Cleaning

Due to fog residue, smoke, and dust cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the outside
casing.

2. Use a brush to wipe down the fan grill.

3. Clean the external optics with glass cleaner and a soft cloth every
20 days.

4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.

5. Always be sure to dry all parts completely before plugging your
unit back in.

Cleaning frequency depends on the environment in which the fixture
operates (I.E. smoke, fog residue, dust, dew).

©American DJ Supply® - www.americandj.com - RazzMaTazz™ Instruction Manual Page 4©American DJ Supply® - www.americandj.com - RazzMaTazz™ Instruction Manual Page 3