Amana 3UHSDUH, RFDWLRQ User Manual

Attention Installer

Amana cann ot be responsible
for improper installation.

3UHSDUH /RFDWLRQ



• Make sure cutout floor is level. If the floor is not
level it is necessary to shim the rear wheels onto
a piece of plywood or other shim m ate rial so
refrigerator is level.

!

WARNING

To avoid electr ical shock which can cause severe
personal i nju ry or death, discon nect power out let
from main pow er supply before install ing or
servicing refrigerator.

3UHSDUH UHIULJHU DWRU IRU GHOLYHU\



Some instal lati ons may require door removal to
get the refrig er ator into the home.

1. Remove toe gr il le .

2. Remove top hinge cover and top hinge.

Dispensing and Electronic Model s

• Discon nect wire connecto rs.
Loosen the wa t er tub e cl am p (A ) . L oosen the
water tube union nut (B). Pull the water tube
away from the union nut and through the tube
clamp.

• Unpl ug elect rical connecto r f r om voltage box ( C) .

!

CAUTION

To avoid electrical shock which
can cause severe personal
injury or death, green ground wire

must remain attached to hinge

C

.

Shim refrigerator
wheels as needed

B

3. Remove doo rs .

• R em ove top hinges.

• R em ove doors from bottom hinge.

• R em ove bottom hinge.

Top left

Bottom
left

,QVWDOO UHIULJHUDWRU



1. Reinstall doo rs by per f or m ing section 2 in
reverse orde r.

2. Connect ice maker water supply line. (Ref er to
Owner’s Ma nual)

3. Plug powe r cord i nt o electrical recept acle.

4. Move refrigerator into final location.

5. Once refrigerator is located and stable, level
refrigerat or by adjusting front , and r ear (some
model s ) cabin et leveling adju stment s crews.

6. Reconnect p ower from power source to electrical
receptacle.

7. Align doors.

• To align tops of doors loose n the 2 bottom
righ t side hi nge scr ew s . Tur n cam to ra i s e or
lower refrigerator door (Some models). (Refer
to label insid e re fri ger at or compartment on
bottom mullion.)

• Tighten the 2 hinge screws.

8. Rep lace toe grille.

Top right

Bottom
right

Copper
tubing

ALIGN

4. Attach
refrigerator t o
appliance cart.

To avoid floor and wall damage
protect walls and soft vinyl or other
flooring with masonite or other protect i ve
material when moving the refrigerator.

"P" clamp

Brass nut

Brass sleeve

Water valve
inlet connection

cabinet

adjustment scr ew

!

CAUTION

level ing

A

Loosen hinge screws

2 turns counterclockwise

Door alignment

adjustment cam

(some models)

3UHSDUH UHIULJHUDWRU IRU XVH



1. Remove all interior packaging material.

2. C le an interior and ext er i or of ref r igerator.

3. Inst r uct consumer on cont r ols and fe at ur es.

Part No. 12123312 Printed in U.S.A.

4. Verify power to refrigerator is connected.