• Safety Instructions & Warranty Information Booklet
CONNECTION DIAGRAM
*Note: Microphones, mixer, amp, and cables are not included.
Speaker Speaker
Microphones*
Mixer*
OUTPUTINPUT
Powered Amplifier*
INSTALLATION
This speaker should be installed securely on a stand on the
floor, according to its maximum weight, or suspended from its
suspension points (M10 x 1.5PH, 30mm length) (see image
for an example). We do NOT recommend suspending
multiple speakers in a vertical array.
Example:
REAR PANEL OVERVIEW
1. INPUT – Use a standard Speakon* cable (not included) to connect your
powered amplifier to this input.
2. THRU – Use a standard Speakon cable (not included) to connect this
jack to the input of another speaker (i.e., another TRUESONIC speaker).
* Speakon is a trademark of Neutrik® AG, registered in the U.S. and other countries.
Eyebolt
Dust cover
Suspension
point
12
2
CONTENIDO DE LA CAJA
• Altavoz TRUESONIC
• Guía de inicio rápido
• Folleto de instrucciones de seguridad e información sobre la garantía
DIAGRAMA DE CONEXIÓN
*Nota: No se incluyen micrófonos, mezclador, amplificador y cables.
Altavoz Altavoz
Micrófonos*
Mezclador*
OUTPUTINPUT
Amplificador alimentado*
INSTALACIÓN
Este altavoz debe instalarse sobre un soporte colocado en el
suelo, de acuerdo a su peso máximo, o suspendido de sus
puntos de suspensión (M10 x 1.5PH, 30 mm de longitud)
(vea la imagen de ejemplo). NO recomendamos suspender
varios altavoces en un arreglo vertical.
Ejemplo:
VISTA DEL PANEL TRASERO
1. ENTRADA – Use un cable Speakon* estándar (no incluido) para
conectar su amplificador alimentado a esta entrada.
2. CONEXIÓN PASANTE – Use un cable Speakon estándar (no incluido)
para conectar este conector a la entrada de otro altavoz (por ej. otro
altavoz TRUESONIC).
* Speakon es una marca comercial de Neutrik® AG., registrada en EE.UU. y otros países.
Perno de ojal
Cubierta
antipolvo
Punto de
suspensión
12
3
CONTENU DE LA BOÎTE
• Haut-parleur TRUESONIC
• Guide d’utilisation simplifié
• Consignes de sécurité et informations concernant la garantie
SCHÉMA DE CONNEXION
*Remarque : Microphones, câbles, console de mixage et amplificateur non inclus.
Haut-parleur Haut-parleur
Microphones*
Amplificateur de
puissance*
Console de mixage*
OUTPUTINPUT
INSTALLATION
Ce haut-parleur doit être installé sur un pied sur le plancher,
en fonction de son poids maximum, ou suspendu par ses
points d’ancrage (M10 x 1,5 PH, 30 mm de longueur)
(Consultez l’image). Nous NE RECOMMANDONS PAS de
suspendre plusieurs haut-parleurs ensemble.
Exemple :
CARACTÉRISTIQUES DU PANNEAU ARRIÈRE
1. ENTRÉE – Utilisez un câble Speakon* standard (non inclus) pour
brancher l'amplificateur de puissance à cette entrée.
2. SORTIE RELAIS – Utilisez un câble Speakon standard (non inclus) pour
brancher cette sortie à l’entrée d'un autre haut-parleur, tel qu’un autre
haut-parleur TRUESONIC.
* Speakon est une maque de commerce déposée de Neutrik® AG, enregistrée aux
États-Unis et dans d'autres pays.
Boulon à œil
Housse de
protection
Point
d’ancrage
12
4
CONTENUTI DELLA CONFEZIONE
• Altoparlante TRUESONIC
• Guida rapida
• Istruzioni di sicurezza e garanzia
SCHEMA DEI COLLEGAMENTI
*Nota bene: microfoni, mixer, monitor, amplificatore e cavi non in dotazione.
Altoparlante Altoparlante
Microfoni*
Mixer*
OUTPUTINPUT
Amplificatore alimentato*
INSTALLAZIONE
Questo altoparlante deve essere installato su un supporto da
pavimento, in base al suo peso massimo, oppure appeso
servendosi degli appositi punti di sospensione (M10 x 1,5PH,
30 mm di lunghezza) (si veda l'immagine di esempio). NON si
consiglia di sospendere più altoparlanti in verticale.
Esempio:
PANORAMICA PANNELLO POSTERIORE
1. INGRESSO – Servirsi di un cavo standard Speakon* (non in dotazione)
per collegare un amplificatore alimentato a questo ingresso.
2. THRU – Servirsi di un cavo standard Speakon (non in dotazione) per
collegare questo jack all'ingresso di un altro altoparlante (ad es. un altro
altoparlante TRUESONIC).
* Speakon è un marchio di fabbrica di Neutrik® AG, registrato negli Stati Uniti e in altri
Paesi.
Bullone a
occhiello
Coperchio
antipolvere
Punto di
sospensione
12
5
LIEFERUMFANG
• TRUESONIC Lautsprecher
• Schnellstart-Anleitung
• Sicherheitshinweise und Garantieinformationen
ANSCHLUSSÜBERSICHT
*Hinweis: Mikrofone, Mixer, Monitore, Verstärker und Kabel sind nicht im Lieferumfang enthalten.
Lautsprecher Lautsprecher
Mikrofone*
Mixer*
OUTPUTINPUT
Endstufe*
MONTAGE
Dieser Lautsprecher sollte seinem Maximalgewicht
entsprechend auf einem Bodenstativ montiert oder an den
Aufhängepunkten aufgehängt werden (M10 x 1.5PH, 30mm
Länge) (siehe Beispielbild). Mehrere Lautsprecher vertikal
aufzuhängen ist NICHT empfehlenswert.
Beispiel:
ÜBERSICHT RÜCKSEITE
1. EINGANG – Verwenden Sie ein handelsübliches Speakon*-Kabel (nicht im
Lieferumfang enthalten), um Ihre Endstufe an diesen Eingang
anzuschließen.
2. THRU – Verwenden Sie ein handelsübliches Speakon-Kabel (nicht im
Lieferumfang enthalten), um diese Buchse mit dem Eingang eines anderen
Lautsprechers (d.h. eines weiteren TRUESONIC Lautsprechers) zu
verbinden.
* Speakon ist ein Warenzeichen der Neutrik® AG und ist in den USA und anderen Ländern eingetragen.
Ringschraube
Staubabdeckung
Aufhängepunkt
12
6
INHOUD VAN DE DOOS
• TRUESONIC luidspreker
• Snelstartgids
• Veiligheidsvoorschriften & boekje met informatie over de garantie
VERBINDINGSDIAGRAM
* Opmerking: Microfoons, mengpaneel, versterker en kabels zijn niet inbegrepen.
Luidspreker
Microfoons*
Mengpaneel*
Luidspreker
OUTPUTINPUT
Versterker*
INSTALLATIE
Deze luidspreker dient te worden geplaatst op een
vloerstatief aangepast aan het maximumgewicht, of
opgehangen aan zijn ophangpunten (M10 x 1.5PH, 30 mm
lengte) (zie afbeelding als voorbeeld). Wij raden u NIET aan
meerdere luidsprekers in een verticale opstelling op te
hangen.
Voorbeeld:
OVERZICHT ACHTERPANEEL
1. INPUT – Gebruik een standaard Speakon-kabel* (niet meegeleverd) om
uw versterker met deze ingang te verbinden.
2. THRU – Gebruik een standaard Speakon-kabel (niet meegeleverd) om
deze aansluiting te verbinden met de ingang van een andere luidspreker
(bijv. een andere TRUESONIC-luidspreker).
* Speakon is een handelsmerk van Neutrik® AG, geregistreerd in de VS en andere landen.
Oogbout
Stofkap
Ophangpunt
12
7
SPECIFICATIONS
Output power: 250 W Continuous (RMS), 500 W Program (RMS), 1000 W peak
Crossover: 2.15 kHz (@ 12 dB/Oct, with HF protection)
Max SPL @ 1m: 121 dB Continuous, 127 dB Peak
Input Sensitivity (1 W @ 1 m): 97 dB SPL
Frequency Response: 48 Hz – 18 kHz (@ -10 dB)
Nominal Impedance: 8Ω
Low Frequency: 15" (305mm) woofer, 2.5" (64 mm) voice coil
High Frequency: 1" (25 mm) neodymium driver
Connectors: Input: Speakon*
Link: Speakon
Coverage: 80°/100° H x 60° V nominal
Cabinet: Polypropylene, trapezoidal
Dimensions (H x W x D): 26.7" x 16.9" x 15.2" (679 mm x 430 mm x 385 mm)
Weight (speaker only): 39.9 lbs (18.1 kg)
* Speakon is a trademark of Neutrik® AG, registered in the U.S. and other countries.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
www.altoprofessional.com
MANUAL VERSION 1.0
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.