Alpine KIT-903JC Frame Installation Manual [EN]

8

9

8 Install the Display by thigtening the 4
screws supplied in the radio kit.
For more details refer to the radio
installa�on manual from page 6 to
page 8.

9 This is the final result.

JEEP

Model:

Year:

Kit content:

Compa�bility:

Customer code:

Compass

2018>

Facia plate

moun�ng brackets+ screws

Compa�ble with double DIN device

01/2020 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints R2

INSTALLATION MANUAL

All installa�on work must be performed by a qualified professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

1a

1b

IF THE OEM DASHBOARD IS LIKE PICTURE 1a (CONFIGURATION 5 INCH) DO NOT USE THE
SPACERS SHOWN IN THE PICTURE 5a
IF THE OEM DASHBOARD IS LIKE PICTURE 1b (CONFIGURATION 8.4 INCH) USE THE SPACERS
SHO

WN IN THE PICTURE 5a

1a This is how the original dashboard
looks like in 5 inch configura�on.

2

3

1b This is how the original dashboard
looks like in 8.4 inch configura�on.

2 Remove the OEM dashboard as
shown in the picture.

3 Remove and save the 4 screws circled
in Red.
Disconnect all cables and remove the
OEM Radio from the radio tunnel.

5a

5 Fix the facia plate to the brackets using the 2 black screws and the 2 spacers as
shown in the picture 5a.

6

5b

6 Connect all cables, verify the proper
func�oning of the system and install
the radio in the radio tunnel by fixing
the 4 screws saved at point 3.

7

4

4 Fix the brackets to the Radio by
�ghtening the 3 screws per side
supplied in the kit.

7 Install the OEM Dashboard previously
removed.