Alpine KIT-8VWD, KIT-8VW, KIT-8VWV, KIT-8VWX Installation Manual [EN]
5. If necessary : Rasp hexagonal
pocket to AF44 in order to use
hexagonal bar AF43,6
Installation Manual
INE-W928R Kit
colour: black
6. Connect all required circuit points
Push Alpine INE-W928R into dash
board.
Golf VI only: Fix screws on top
7. Place facia plate
Put dome of facia plate
exactly over the holes of
mounting frames
(see arrow)
Fix facia plate with 4 screws
• VW Eos
• VW Golf V / VI
• VW Jetta V / VI
Compatible with these Alpine navigation devices
6
• VW Passat / Passat CC
• VW Polo 6R
• VW Scirocco
INE-W928R
5
part-no.:
KIT-8VW
KIT-8VWD
5
8. Place OEM panel over facia plate
to nish installation.
• (1) facia plate
• (2) mounting bracket right
• (3) mounting bracket left
6
• (4) hexagonal bar (AF43,6) / (AF37,2)
• (5) slider
• (6) countersunk at head tapping screw
Hexagonal Bar
AF43,6
Hexagonal Bar
AF37,2
Hexagonal Bar
standard unit position :
screw position I
alternative unit position :
screw position II
5.
VW Golf V
VW Golf VI
VW Jetta V
VW Jetta VI
VW Passat
VW Polo 6R
1. Unclip and remove OEM panel
2. Remove 4 screws of OEM
head unit
3. Remove OEM head unit
VW Eos
Hexagonal Bar
AF43,6
VW Scirocco
a
a
x sliders (a) with glue
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
4. Put mounting frames in
dash board.
Golf VI only: Release screws on
top(see arrows) in order to clear
space for Alpine INE-W928R
If necessary:
Cut away plastic to clear space
for Alpine INE-W928R
Loading...