How it Works
Alpine
Loading...
CDM-7854E
User Manual
19 pgs491.91 Kb0

Alpine CDM-7854E, CDE-7853E User Manual

Contents
Operating Instructions
WARNING
WARNING.................................................. 2
CAUTION................................................... 2
PRECAUTIONS ......................................... 2
Basic Operation
Attaching the Front Panel ................................. 4
Initial System Start-Up ..................................... 4
Subwoofer On and Off
(CDM-7854E only) ....................................... 5
Adjusting Volume/Bass/T reble/
Balance (Between Left and Right)/
Fader (Between Front and Rear) ................... 5
Turning Loudness On/Off (CDE-7853E only) . 5
BBE Mode On/Off
(CDM-7854E only) ....................................... 5
Setting Bass Frequency..................................... 5
Setting Time...................................................... 6
Radio Operation
Manual Storing of Station Presets .................... 8
Automatic Memory of Station Presets.............. 8
Storing into Direct Access Preset (D.A.P.)
Band............................................................... 9
Tuning to Preset Stations .................................. 9
ENGLISH
CD Player Operation
Inserting/Ejecting Disc ................................... 10
Normal Play and Pause ................................... 10
Music Sensor (Skip)........................................ 10
Fast Forward and Backward ........................... 10
Repeat Play ..................................................... 11
M.I.X. (Random Play) .................................... 11
Scanning Programmes .................................... 11
Controlling CD Changer (Optional)
(CDM-7854E only) ..................................... 11
Information
In Case of Difficulty ....................................... 12
Specifications.................................................. 13
Installation and Connections
Warning........................................................... 14
Caution............................................................ 14
Precautions...................................................... 14
Installation ...................................................... 15
Connections .................................................... 16
1-EN
WARNING
WARNING
The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. Failure to heed the instructions will result in severe injury or death.
DO NOT DISASSEMBLE OR ALTER.
Doing so may lead to accident, fire or electric shock.
KEEP SMALL ARTICLES OUT OF THE REACH OF CHILDREN.
If swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
When problems occur such as a lack of sound or video, foreign objects inside the unit, smoke coming out, or noxious odors, stop use immediately and contact the dealer where you bought the equipment. Failure to do so may result in an accident or injury.
DO NOT OPERATE THE EQUIPMENT OR LOOK AT THE SCREEN WHILE DRIVING THE VEHICLE.
Operating the equipment may distract the driver from looking ahead of the vehicle and cause accident. Always stop the vehicle in a safe location before operating this equipment.
DO NOT RAISE THE VOLUME EXCESSIVELY.
Keep the volume at a level where you can still hear outside noises while driving. Driving while unable to hear outside noises could be the cause of accident.
DO NOT USE THIS EQUIPMENT FOR PURPOSES OTHER THAN STATED FOR THE VEHICLE.
Failure to do so may result in electric shock or injury.
CAUTION
The exclamation point within an equilateral triangle and "CAUTION" are intended to alert the user to the presence of important operating instructions. Failure to heed the instructions can result in injury or material damage.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Blocking them may cause heat to build up inside and may result in fire.
STOP THE VEHICLE IF UNIT OPERATION MIGHT INTERFERE WITH DRIVING.
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
DO NOT PLACE FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.
Do not insert hands, fingers or foreign objects in the disc or cassette insertion slots, or in gaps during monitor startup/storage. Doing so may result in personal injury or damage to the equipment.
2-EN
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off.
Installation Location
Make sure the CDM-7854E/CDE-7853E will not be installed in a location subjected to:
• Direct sun and heat
• High humidity and water
• Excessive dust
• Excessive vibrations
Handling the Detachable Front Panel
• Do not expose to rain or water.
• Do not drop or apply shock.
Inserting Discs
Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the Reset switch (located behind the detachable front panel) with a pointed object such as a ball-point pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.
New Discs
As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ball-point pen or other such instrument, then insert the disc again.
Centre Hole
Centre Hole
New Disc
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT CORRECT
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.
Bumps
Outside (Bumps)
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism.
Disc Accessories
There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.
Disc StabilizerTransparent Sheet
3-EN
Basic Operation
MUTE
22
2
22
11
1
11
PWR
MODE / BBE
(LOUD)
c
B.C.
DN g
Detaching the Front Panel
1 Press the PWR (Power) button for more than 3
seconds to turn off the power.
2 Press the (Release) button at lower left corner
until the front panel pops out.
3 Grasp the left side of the front panel and pull it
out.
NOTES
• The front panel may become hot in normal usage
(especially the connector terminals), this is not malfunction.
• To protect the front panel, place it in the supplied
carrying case.
Attaching the Front Panel
1 First, insert the right side of the front panel into
the main unit. Align the 2 small holes on the front panel with the 2 projections on the main unit.
2 Push the left side of the front panel until it locks
firmly into the main unit.
2
11
f UP
Initial System Start-Up
Immediately after installing or applying power to the unit, it should be initialized. To do this, first, remove the detachable front panel. Behind the front panel, to the right of the connector, there is a small hole. Using a pencil or other pointed object, press the red reset switch mounted behind this hole to complete the initialization procedure.
1
Reset switch
Turning Power On and Off
1 Press the PWR (Power) button to turn on the
unit.
NOTE
The unit can be turned on by pressing any other button except the eject c button.
The volume level gradually increases to the previous level you were listening to before the unit was turned off. Press the PWR button for more than 3 seconds to turn off the unit.
NOTE
The very first time the power is turned on, the volume will start from level 12, the BBE will be on in the tuner mode*, and the LOUD function will be on**. * CDM-7854E only. ** CDE-7853E only.
NOTE
Before attaching the fr ont panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.
4-EN
Loading...
+ 13 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use