Product Specification Sheet A PS400 - Rev. 07/2013
ST-FOOT Momentary Foot Pedal Switch
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: AlphaCommunications.com • Email: info@alphacommunications.com
Copyright© 1998-201 4 Alpha Communications® - All Rights Reserved.
Due to co ntinuous pro duct improvement, all colo rs, sizes, materials, finishes and specification s are subject to ch ange without n otice.
< Previous (APS399) Next (APS401) >
Architects' And Engineers'
Specifications
The moment ary foot pedal switc h unit(s) shall
be Alpha Communications® model ST- FOOT or
approved equivalent.
Foot pedal switc h unit(s) shall be
SPST momentary type (normally open). Unit shall
be provided with a six (6) foot
flexible c onnect ing cable, in a matc hing Grey
finish. Cable shall have 3- #18AWG conduct ors
(Blac k and White for normally open connections
and Green for ground if needed). Foot pedal shall
be non-skid type.
Contract or shall observe all local and national
elect rical and building codes.
ST-FOOT Momentary Foot Pedal Switch
The Alpha Communicat ions® model ST- FOOT momentary foot pedal switc h can be
used with a variety of intercom and control systems. The ST -FOOT is normally used
in applications such as bank teller windows, t icket windows, drive-thru fast
food restaurant windows, operating rooms, x-ray rooms and ot her places where the
operator c annot use their hand(s) to operate an intercom or c ontrol device.
Features
Rugged Momentary Electrical Switc h Component
Non-Skid Pedal Finish
Comes with heavy duty 6 foot grounded cord
'Normally Open' switch mechanism
Electrical Specifications
Switch: 6.0"W x 8.75"H x 0.50"D (153mm x 223mm x 13mm)
Cord/Cable: 4.75"W x 7.50"H x 2.75"D (121mm x 191mm x 70mm)
Finish: Grey painted finish
Pedal Unit: Non-Skid Pedal Unit
Mechanical Specifications
Dimensions: 3.50"H x 2.63"W x 1.00"D (89mm x 67mm x 26mm)
Weight: 2.0 lbs. (909 grams)
Optional Model
ST- FOOT- P Same as model ST-FOOT, except it has a 1/4" male phono plug at the end of the cable instead of
wire pigtail leads.