Allied Telesis AT-X510L-52GT Product Information

Switches | Product Information
x510 Series
Including x510, x510DP and x510L Series Switches
The Allied Telesis x510 Series of stackable Gigabit Layer 3 switches
includes a full range of security and resiliency features, coupled with easy management, making them the ideal choice for network access applications.
Overview
Allied Telesis x510 Series switches are a high-performing and feature-rich choice for today’s networks. They offer a versatile solution for Enterprise applications. With a choice of 24- and
48-port models with 1/10Gigabit uplink
ports, plus the power of Allied Telesis Virtual Chassis Stacking (VCStack™), the x510 Series can connect anything from a small workgroup to a large business.
Powerful network management
Meeting the increased management requirements of modern converged networks, Allied Telesis Autonomous Management Framework automates many everyday tasks including configuration management.
The complete network can be
managed as a single virtual device with powerful centralized management features. Growing the network can be accomplished with plug-and-play simplicity, and network node recovery is fully zero-touch.
AMF secure mode increases network security with management traffic encryption, authorization, and monitoring. AMF Guestnode allows third party devices, such as IP phones and security cameras, to be part of an AMF network.
TM
(AMF)
Network resiliency
The convergence of network services
in the enterprise has led to increasing demand for highly available networks with minimal downtime. VCStack, in conjunction with link aggregation, provides a network with no single point of failure and an easy, resilient solution for high availability application x510 Series can form a VCStack of up to four units for enhanced resiliency and simplified device management.
s. The
Allied Telesis Ethernet Protection Switched Ring (EPSRing™), and the standards-based G.8032 Ethernet Ring Protection, ensure that distributed network segments have
high-speed, resilient access to online
resources and applications.
Ring Protection and VCStack Long­Distance (VCStack-LD), which enables stacks to be created over long distance fiber links, make the x510 Series the perfect choice for distributed environments.
Reliable
The x510 Series was designed with reliability in mind, and guarantees continual delivery of essential services. With dual built-in power supplies and near-hitless online stack reconfiguration, maintenance may be performed without affecting network uptime.
The x510DP features dual hot­swappable load-sharing power supplies for maximum uptime. With front-to-back or back-to-front cooling options, the x510DP is ideal for data center applications.
The x510L Series switches enable high­value solutions at the network edge.
Secure
Advanced security features protect the network. Unprecedented control over user access is provided with Network Access Control (NAC), mitigating threats to network infrastructure. This ensures the network is accessed only
by known users and devices — all users’ adherence to network security policies is checked, and then either access is granted or remediation is offered. Secure access can also be provided for guests.
Future-proof
The x510 Series ensures a future-proof
network, with superior flexibility coupled with the ability to stack multiple units. All x510 Series models feature 1/10 Gigabit uplinks ports and a comprehensive IPv6 feature set, to ensure they are ready for future network traffic demands. All x510 24-port models are Software Defined Networking (SDN) ready and are able to support OpenFlow v1.3.
Environmentally friendly
The x510 Series supports Energy
Efficient Ethernet (EEE), automatically reducing the power consumed by the switch whenever there is no traffic on a port. This sophisticated feature can significantly reduce operating costs by reducing the power requirements of the switch and any associated cooling equipment.
ۼۼ AMF secure mode
ۼۼ G.8032 Ethernet Ring Protection
ۼۼ Ethernet CFM
ۼۼ Active Fiber Monitoring
ۼۼ OpenFlow for SDN
ۼۼ VLAN Mirroring (RSPAN)
ۼۼ VLAN ACLs
alliedtelesis.com
NETWORK SMARTER
x510 Series | Stackable Gigabit Layer 3 Switches
Key Features
Allied Telesis Autonomous Management Framework (AMF)
ۼۼ Allied Telesis Autonomous Management
Framework (AMF) is a sophisticated suite of management tools that provide a simplified approach to network management. Powerful features like centralized management, auto­backup, auto-upgrade, auto-provisioning and auto-recovery enable plug-and-play networking and zero-touch management.
ۼۼ Any x510 Series switch can operate as the
AMF network master, storing firmware and
configuration backups for other network nodes. The AMF master enables auto-provisioning and auto-upgrade by providing appropriate files to new network members. New network devices can be pre-provisioned making installation easy
because no on-site configuration is required.
ۼۼ AMF secure mode encr ypts all AMF traf fic, provides
unit and user authorization, and monitors network access to greatly enhance network security.
ۼۼ AMF Guestnode allows Allied Telesis wireless
access points and further switching products, as well as third party devices such as IP phones and security cameras, to be part of an AMF network.
Virtual Chassis Stacking (VCStack )
ۼۼ Create a VCStack of up to four units with 40 Gbps
of stacking bandwidth to each unit. Stacking
links are connected in a ring so each device has dual connections to further improve resiliency. VCStack provides a highly available system where network resources are spread out across stacked units, reducing the impact if one of the units fails. Aggregating switch ports on different units across the stack provides excellent network resiliency.
Long-Distance Stacking
ۼۼ Long-distance stacking allows a VCStack to
be created over longer distances, perfect for a distributed network environment.
Ethernet Protection Switched Ring (EPSRing)
ۼۼ EPSRing and 10 Gigabit Ethernet allow several
x510 switches to form high-speed protected rings capable of recovery within as little as 50ms. This feature is perfect for high performance and high availability in enterprise networks.
ۼۼ Super-Loop Protection (SLP) enables a link between
two EPSR nodes to be in separate EPSR domains, improving redundancy and network fault resiliency
G.8032 Ethernet Ring Protection
ۼۼ G.8032 provides standards-based high-speed
ring protection, that can be deployed stand-alone, or interoperate with Allied Telesis EPSR.
ۼۼ Ethernet Connectivity Fault Monitoring (CFM)
proactively monitors links and VLANs, and provides aler ts when a fault is detected.
Industry-leading Quality of Service (QoS)
ۼۼ Comprehensive low-latency wire speed QoS
provides flow-based traffic management with full classification, prioritization, traffic shaping and min/max bandwidth profiles. Boosted network performance and guaranteed delivery of business­critical Ethernet services and applications are provided. Time-critical services such as voice and video take precedence over non-essential services such as file downloads, maintaining responsiveness of Enterprise applications.
Loop Protection
ۼۼ Thrash limiting, also known as rapid MAC
movement, detects and resolves network loops. It is highly user-configurable — from the rate of looping traffic to the t ype of action the switch should take when it detects a loop.
ۼۼ With thrash limiting, the switch only detects a loop
when a storm has occurred, which can potentially cause disruption to the network. To avoid this, loop detection works in conjunction with thrash limiting to send special Loop Detection Frame (LDF) packets that the switch listens for. If a port receives an LDF packet, you can choose to disable the port, disable the link, or send an SNMP trap. This feature can help to detect loops before a network storm occurs, avoiding the risk and inconvenience of traffic disruption.
Power over Ethernet Plus (PoE+)
ۼۼ With PoE, a separate power connection to media
endpoints such as IP phones and wireless access points is not necessary. PoE+ reduces costs and provides even greater flexibility, providing the capability to connect devices requiring more power (up to 30 Watts) such as pan, tilt and zoom security cameras.
High Reliability
ۼۼ The x510 Series switches feature front to back
cooling and dual power supply units (PSUs). The x510DP features dual hot-swappable load sharing power supplies for maximum uptime, and the option of either front-to-back or back-to-front cooling. This makes it ideal for use as a top-of­rack data center switch.
Voice VLAN
ۼۼ Voice VLAN automatically separates voice
.
and data traf fic into two different VLANs. This automatic separation places delay-sensitive traffic into a voice- dedicated VLAN, which simplifies QoS configurations.
Open Shortest Path First (OSPFv3)
ۼۼ OSPF is a scalable and adaptive routing protocol
for IP networks. The addition of OSPFv3 adds support for IPv6 and further strengthens the Allied Telesis focus on next generation networking.
sFlow
ۼۼ sFlow is an industry-standard technology for
monitoring high-speed switched networks. It provides complete visibility into network use, enabling performance optimization, usage accounting/billing, and defense against security threats. Sampled packets sent to a collector ensure it always has a real-time view of network traffic.
VLAN Mirroring (RSPAN)
ۼۼ VLA N mirroring allows traffic from a port on
a remote switch to be analysed locally. Traffic being transmit ted or received on the port is duplicated and sent across the network on a special VLAN
Optical DDM
ۼۼ Most modern optical SFP/SFP+/XFP
transceivers support Digital Diagnostics Monitoring (DDM) functions according to the specification SFF-8472. This enables real time monitoring of the various parameters of the transceiver, such as optical output power, temperature, laser bias current and transceiver supply voltage. Easy access to this information simplifies diagnosing problems with optical modules and fiber connections.
Active Fiber Monitoring
ۼۼ Active Fiber Monitoring prevents eavesdropping
on fiber communications by monitoring received optical power. If an intrusion is detected, the link can be automatically shut down, or an operator alert can be sent.
Tri-authentication
ۼۼ Authentication options on the x510 Series also
include alternatives to IEEE 802.1x port-based authentication, such as web authentication, to enable guest access and MAC authentication for endpoints that do not have an IEEE 802.1x supplicant. All three authentication methods— IEEE 802.1x, MAC-based and Web-based— can be enabled simultaneously on the same port for tri-authentication.
TACACS+ Command Authorization
ۼۼ Centralize control of which commands may
be issued by a specific user of an AlliedWare Plus device. TACACS+ command authorization complements authentication and accounting services for a complete A A A solution
Premium Software License
ۼۼ By default, the x510 Series offers a
comprehensive Layer 2 and basic Layer 3 feature set that includes static routing and IPv6 management features. The feature set can easily be elevated to full Layer 3 by applying the premium soft ware license. This adds dynamic routing protocols and Layer 3 multicasting capabilities.
Software Defined Networking (SDN)
ۼۼ OpenFlow is a key technology that enables the
use of SDN to build smart applications that unlock value and reduce cost.
VLAN ACLs
ۼۼ Simplify access and traffic control across entire
segments of the network. Access Control Lists (ACLs) can be applied to a Virtual LAN (V LAN) as well as a specific port.
2 | x510 Series
x510 Series | Stackable Gigabit Layer 3 Switches
Key Solutions
Internet
Remote
VPN
x510L
Router
x510 x510
x230
x230
Resilient distribution switching
Allied Telesis x510 Series switches are ideal for distribution solutions, where resiliency and flexibility are required. In the above diagram, distribution switches utilize long-distance Virtual Chassis Stacking (VCStack­LD) to create a single virtual unit out of multiple devices. By using fiber stacking connectivity, units can be kilometers apart – perfect for a distributed environment.
When combined with link aggregation, VCStack provides a solution with no single point of failure that fully utilizes all network bandwidth.
Allied Telesis x510 Series switches support Enterprises and their use of business-critical online resources and applications, with a resilient and reliable distribution solution.
x510L
SBx8112
x510L
x510 x510
Server
Farm
Network Attached
Sorage
VCStack link 10 Gigabit link 1 Gigabit link 10/100 link Link aggregation
Peace of mind at the network edge
Allied Telesis x510L Series switches make the ideal choice at the network edge where security, resiliency and flexibility are required. In the above diagram, security is enforced using Network Access Control (NAC) combined with tri­authentication to prevent unauthorized users and devices from connecting to the network. Link aggregations are used to provide both resiliency back to the core chassis, and an increase in available bandwidth over a single link. Flexibility is ensured with the range of interface types and PoE options available on the x510L Series.
NETWORK SMARTER
x510 Series | 3
Loading...
+ 7 hidden pages