Allied Telesis AT-WR4662N User Manual

AT-WR4662n | High-Speed Mobility - Wireless Base Router
Software Configuration
Quick Installation Guide | Wireless LAN
Logging into the system
Please access the system facilities via SSH using any text-mode SSH client software.
Accessing the system via SSH
The Secure Shell (SSH) is an encrypted networking protocol, allowing user to configure the device through Ethernet network. Microsoft does not supply SSH tool, you can use alternative program such as Tera Term Pro, which is licensed under GPL2.
AT-WR4662n>enable
Password:
AT-WR4662n#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
AT-WR4662n(config)#enable password [NEW PASSWORD]
AT-WR4662n(config)#
The device is factory configured with the static IP address
192.168.1.1. If the device is under a DHCP server, please check the assigned
IP address.
The Command Line Interface (CLI)
When logging into the system via terminal console in SSH or RS-232, you will be presented with the login prompt. Use 'manager' and password 'friend' for logging into the system for the first time. Entered password is not visible, and the
Input your preferred password in [NEW PASSWORD].
Commands available for each protocol are separated into several modes arranged in a hierarchy. The command prompt shows the identity name of the router and the current menu level, in example:
backspace key is not valid.
AT-WR4662n login: manager
Password:
After logging into the router you will be presented with the ATI™ banner and command prompt, in example:
AA TTTTTTTTTTTTTTTTTT ooooo
AAAAA TTTTTTTTTTTTTTT oooooooo
AAAAAAAA TTTTTTTT I oooooo
AAAAAAAAAAA TTTTTTT IIIIIIIIII
AAAAAAA AAAAA TTTT IIIIIIIIII
AAAAAAA AAAAA T IIIIIIIIII
Copyright (C) 2012 Allied Telesis International All Rights reserved.
AT-WR4662n>
The password entering Privileged Exec Mode is still 'friend'; it can be changed with enable password [NEW PASSWORD] command in Config Mode. Please perform the following guide.
AT-WR4662n>
AT-WR4662n#
AT-WR4662n(config)#
AT-WR4662n(config-if)#
The list of available commands at any menu level can be obtained by entering the question mark '?',
AT-WR4662n>?
Clear Reset functions
Debug debugging functions
(see also ‘undebug’)
disable Turn off privileged mode command
enable Turn on privileged mode command
exit End current mode and down to previous
mode
help Description of the interactive help
logout Exit from EXEC
no Negate a command or set its defaults
quit Exit current mode and down to previous
mode
show Show command
terminal Set terminal line parameters
AT-WR4662n>
For further and more detailed information and for the full command set, please refer to the AT-WR4600 Series manual; it is available online at http://www.alliedtelesis.com/support/
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2012 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
AT-WR4662n | High-Speed Mobility - Wireless Base Router
Acknowledgments Contacting Allied Telesis
This product includes software developed by the University of California, Berkeley and its contributors. Copyright ©1982, 1986, 1990, 1991, 1993 The Regents of the University of California. All rights reserved.
This product in
cludes software licensed under the GNU General Public License available on:
http://www.gnu.org/licenses/gpl2.html
Source c
ode for all GPL licensed software in this product can be obtained from the Allied Telesis GPL Code Download Center at: http://www.alliedtelesis.com/support/default.aspx
Allied Tele
sis is committed to meeting the requirements of the open source licenses including the GNU General Public License (GPL) and will make all required source code available.
If you would like a copy of the GPL source code contained in Allied Telesis products, please send us a request by registered mail including a check for US$15 to cover production and shipping costs and a CD with the GPL code will be mailed to you:
GPL Code Requ Allied Tele
est
sis Labs (Ltd) PO Box 8011 Christchurch.
New Zealand ©2012 Allied Te
lesis Inc. All rights reserved.
This documenta
tion is subject to change without notice. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or any means electronic or mechanical, including photocopying and recording for any purpose other than the purchaser’s internal use without the written permission of Allied Telesis, Inc.
Allied Tele
sis, AlliedWare Plus, EPSRing, SwitchBlade, and VCStack are trademarks or registered trademarks in the United States and elsewhere of Allied Telesis, Inc. Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Additional brands, names and products mentioned herein may be trademarks of their respective companies.
.
Safety Notice
Do not open service or change any component. Only qualified technicians are allowed to service the equipment. Observe safety precautions to avoid electric shock. Check voltage before connecting to the power supply. Connecting to the wrong voltage will damage the equipment.
Main direct link is: http://www.alliedtelesis.com/support/ .
Where to Find Web-based Guides
The installation and user guides for all Allied Telesis products are available on “Documentation” section. You can view the documents online or download them onto a local workstation or server.
Online, Email and Telephone Support
You can request technical support online by accessing the “Support Cente
r”. Our interactive support center is your link to answers you need. Search our knowledge base, check support tickets, learn about RMAs and contact technical support.
Warranty
For product registration and warranty conditions please visit Allied Tele
http://www.alliedtelesis.com/support/warranty/
sis website:
Returning Products
Products for return or repair must f materials authorization (RMA) number. A product sent to Allied Telesis without an RMA number will be returned to the sender at the sender’s expense.
To obtain
an RMA number, refer to “Replacement Services”
section.
irst be assigned a return
Sales or Corporate Information
You can contact Allied Telesis for sales or corporate information through: http://www.alliedtelesis.com/contact
Management Software Updates
New releases of software for our managed products are available on Allied Telesis web site:
http://www.alliedtelesis.com/support/software/
Tell Us What You Think
If you have any comments or suggestions on how we might improve this or other Allied Telesis documents, please contact us at http://www.alliedtelesis.com
.
.
4
Allied Telesis 1 www.alliedtelesis.com
AT-WR4662n | High-Speed Mobility - Wireless Base Router
AT-WR4662n | High-Speed Mobility - Wireless Base Router
Safety Information
CE Declaration of Conformity (DoC)
The CE Declaration of Conformity is available at:
http://www.alliedtelesis.com/support/
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
x EMC - EN 61000-6-3:2007 x EMC - EN 61000-6-4:2007 x EMC - EN 301 489-17 V2.1.1 x EMC - EN 50121-4:2006 x EMC - EN 50385:2002 x Radio - EN 300 328 V1.7.1 x Radio - EN 301 893 V1.5.1
x Safety - EN 60950-1:2006+A11:2009+A1:2010
This product may be used in all EU countries and other countries following R&TTE directive 1999/5/EC.
In France, outdoor use is limited to 10 mW within the band range of 2454÷2483.5 MHz.. Additional requirements for any country may evolve. Please, check with the local authorities for the latest status of their national regulations for both 2.4GHz. and 5GHz. wireless LANs. Please, be compliant to local regulations declaring your country and the real gain value of antenna system in software configuration by means the following commands:
¾ world-mode dot11d ¾ antenna gain
Note, the value of antenna gain is related to the whole antenna system; that includes the gain of installed antenna and power absorption effects (loss) caused by coax cables, connectors and any other objects like, in example, N-way splitter/combiner.
The maximum permitted antenna-gain value is 27dBi in the 5500-5700MHz band, 22dBi in the 5150-5350MHz band and 18dBi in the 2.4GHz band.
Local language safety statements
Please, go to the Allied Telesis website
http://www.alliedtelesis.com/
statement in your language
for the translated safety
.
.
Hardware Installation
Package Content
Check your package for the following items. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.
x 1x AT-WR4662n unit (802.11n, with 2x2 MIMO)
x 2x protective caps for N-type connector
x 1x field installable RJ-45 connector kit
x 1x pole mount kit with screws, U-bolts and nuts
x 1x this Quick Installation Guide
For connecting the equipment to the wired network, a pre-assembled CAT 5 cable with outdoor waterproof RJ45 connector installed shall be used or the provided RJ45 assembly can be field installed on a CAT 5 outdoor rated cable as shown in Figure 3.
Hardware description
The device has the following connection points:
x 4x antenna connectors, N-Type - female
x 1x Ethernet port, IEEE802.3af PoE
Figure 1 depicts how the rating label on the equipment back indentifies th
The antenna connectors are identified as: 0a - interface dot11radio 0, MIMO chain 0 0b - interface dot11radio 0, MIMO chain 1 1a - interface dot11radio 1, MIMO chain 0 1b - interface dot11radio 1, MIMO chain 1
Figure 1: AT-WR4662n antenna connectors
Figure 2 shows the bottom of the device offering N-type connectors, the vent.
e antenna connectors.
Ethernet PoE connector and the protective
Figure 3: Weather proof RJ45 connector assembly
Mechanical Installation
Installing the device, first attach the provided pole mount bracket or the optional AT-WR4501 wall mount bracket using the 4 bolts provided with the equipment.
Figure 4: HSMIP Base Router mounted on pole
For pole installation mount the two provided U bolts as shown in Figure 4 and fasten the four provided nuts until the equipment i mechanical deformation of bolts or mounting kit. For wall mounting you will need to order the AT-WR4501 Wall Mount kit.
s firmly held. Please do not exceed in order to avoid
Grounding the unit
Allied Telesis 2 www.alliedtelesis.com
On your pole always use proper wire grounding techniques in accordance with your local electric codes. External antennas
Figure 2: The bottom of AT-WR4662n
must be properly grounded too.
Powering the unit
The device requires IEEE 802.3af PoE power feeding; attach power sourcing
USE ONLY PSE which is compliant to IEEE 802.3af, otherwise you can seriously damage the device.
equipment (PSE) to the RJ45 PoE connector.
Allied Telesis 3 www.alliedtelesis.com
Loading...