Allied Telesis AT-9000-28, AT-9000-28SP, AT-9000-52 User Manual

Switches

product information

9000 Series

MANAGED LAYER 2-4 GIGABIT ETHERNET
ECO-SWITCHES

The 9000 Series of high performance Layer 2-4 28- and

52-port Gigabit Ethernet switches brings advanced enterprise
features to a more affordable level while supporting the
changing needs of the SMB market space to improve the
delivery of converged data. Support for jumbo Ethernet
frames enables higher throughput of time-sensitive data.

The AT-9000/28 is a 28-port Gigabit

managed switch with 24 xed
conguration 10/100/1000T por t s, an
additional 4 x 100/1000 SFP ports,
combined with 4 x 10/100/1000T por ts.

The AT-9000/28SP is a 28-port Gigabit

managed switch with 24 x 100/1000 SFP
ports, an additional 4 x 100/1000 SFP
ports, combined with 4 x 10/100/1000T
ports.

The AT-9000/52 is a 52-port Gigabit

managed switch with four xed
conguration 10/100/1000 ports.

Management Stacking

Enhanced Stacking™ provides CLI-
based management of up to 24 switches
with the same effort as for one switch.

The Allied Telesis solution uses open

standard Ethernet inter faces as stacking
links so that many switches can be
remotely managed as one IP entity
across different sites.

Secure Management

Only authorized administrators can
access the management interface of the
9000 Series. Security protocols such
as SSL, SSH and SNMPv3 facilitate this
protection of your network for both
local or remote connections.

Key Features

Easy, Well Known Management

» Industry standard AlliedWare Plus™ CLI

» Simple, intuitive, full featured

Interface

» Secure, encrypted Web and CLI management with

SSHv2 and SSL

» SNMP

Ideal for Classroom or Retail Environments

» 28 or 52 active port

» Lower power consumption switches

» Near silent operation

Management Stacking

» Enhanced Stacking up to 24 units

» Single IP address stack management

All th e QoS Ne eded for an Op en Of fice,
Classroom or Retail Store Environment

» Eight priority queues

» IEEE 802.1p for Layer 2 QoS

» DSCP (DiffServ) for Layer 3 QoS

» IEEE 802.1p to DSCP remarking traffic ready for

transport to the Layer 3 core of the network

» Layer 2 and Layer 4 Access Control List (ACL)

Environmentally Friendly
ECO-Switch

In keeping with our commitment to
environmentally friendly processes
and products, the 9000 Series is a

green range of products designed to

reduce power consumption, minimize
hazardous waste and even reduce ofce
noise pollution. Features include the
use of high efciency power supplies

Allied Telesis Web

%

+

Power Supply Efficiency

Securing t he Net work at its
Most Vulnerable Point

» IEEE 802.1x and RADIUS network login: for advanced

control for user authentication and accountability

» Guest VLAN: to ensure visitors or unauthorized

users connect only to services defined by IT such as
Internet services

» Dynamic VLAN

» TACACS+: for ease of management security

administration

Access Control Lists

» Access Control Lists enable inspection of incoming

frames and classify them based on various criteria.
Specific actions can then be applied to these frames
in order to more effectively manage the network
traffic at Layer 2 through Layer 4. Typically ACLs are
used as a security mechanism, either permit ting or
denying entry (hence the name Access Control) for
frames in a group, but ACLs can also be applied to
QoS.

and low power chipsets. We have also
included an ECO-Switch button on the
front panel of all 9000 Series switches.

This allows you to

conserve additional
power by turning off
the port and mode LEDs when they are
not required.

alliedtelesis.com

9000 Series | Managed Layer 2-4 Gigabit Ethernet ECO-Switches

Low Power Consumption with

Near Silent Operation

Specically designed to be usable in a
classroom or retail store environment,
the 9000 Series uses the latest in low
power technologies to minimize power
consumption and operational noise.

Ideal Branch Ofce and Wiring

Closet Connectivity

Powerful line rate performance makes
this switch ideal for branch ofces or the
wiring closet of larger ofces. The state­of-the art QoS capability of this product
ensures reliable delivery of advanced
network services such as voice and
video, while effectively controlling the
continually increasing trafc needs found
in today’s networks.

Easy Access Networking

Featuring an industry standard
AlliedWare Plus CLI and the Allied
Telesis intuitive Web interface, the

advanced features of the 9000 Series

are accessible to a wide range of system

administrators. The well-known CLI

and Web interfaces signicantly reduce

learning time and minimize the cost of

deployment.

Securing the Network Edge

To ensure the protection of your data,

it is impor tant to control access to your
network. Protocols such as IEEE 802.1x
port-based authentication guarantee
that only known users are connected
to the network. Unknown users who
physically connect can be isolated to a
pre-determined part of your network,

offering guests such benets as Internet

access while ensuring the integrity of

your private network data.

The switch is also fully compliant with

Microsoft Network Access Protection
(NAP) and Symantec Network Access
Control (NAC).

Gigabit and Fast Ethernet

SFP Support

All switches in the 9000 Series suppor t

both Gigabit and Fast Ethernet Small

Form-factor Pluggables (SFPs). This

makes the 9000 Series an ideal family

for environments where Gigabit ber

switches will be phased in over time.

The 9000 Series allows for connectivity

to the legacy 100FX hardware until it is

upgraded to Gigabit.

AT-x 6 0 0 - 4 8Ts/ XP

Layer 3 Stackable Switch

VLAN Double Tagging (Q-in-Q)

VLAN double-tagging can be useful

for customers such as Internet Service
Providers (ISP), allowing them to use

VLANs internally while mixing trafc

from clients that are already VLAN
tagged. The rst VLAN tag is used by
the ISP to route trafc across their own
network, while the second VLAN tag is
that of the end-user customer. The use

of this feature allows end-users to have

physically distributed networks, which
they can manage themselves, carried

over an independent infrastructure.

sFlow

sFlow is an industry-standard technology
for monitoring high-speed switched
networks. It gives complete visibility
into the use of networks enabling
performance optimization, accounting
and billing for usage, and defense against
security threats. Sampled packets sent
to a collector ensure sFlow always
maintains a real-time view of network
trafc.

alliedtelesis.com

Cell Phones

with WiFi

Wireless

Laptops

Network

Printers

AT-WR2304N
Wireless Router

Desktop PCs

LACP

AT-9000/28
Layer 2+ Switch

Desktop PCs